Removal of thiobencarb in aqueous solution by zero valent iron

A cost-effective method with zero valent iron (ZVI) powder was developed for the purification of thiobencarb (TB)-contaminated water. The removal treatment was performed in the batch system. A sample solution of 10 ml containing 10 microg ml(-1) of TB could be almost completely treated by 100mg of ZVI at 25 degrees C for 12h of treatment time. Since the formation of chloride ion in the aqueous solution during the treatment of TB was observed, the removal of TB with ZVI may contain two processes: reduction (degradation) and adsorption. Because the present treatment for TB is simple, easy handling and cheap, the developed technology with ZVI can contribute to the treatment of agricultural wastewaters.     

Initial ecological risk assessment of eight selected human pharmaceuticals in Japan.

Eight pharmaceuticals were selected on the basis of their domestic consumption in Japan, the excretion ratio of the parent compound and the frequency of detection in the aquatic environment or wastewater treatment plant effluent. Toxicity tests on these pharmaceuticals were conducted using Japanese medaka (Oryzias latipes), daphnia (Daphnia magna), and green algae (Psuedokirchneriella subcapitata). Predicted no effect concentration (PNEC) was calculated using lethal or effect concentration 50 (LC50 or EC50) values and no effect concentration (NOEC) obtained in the toxicity tests for these compounds. Predicted environmental concentration (PEC) was also calculated from annual consumption, the excretion rate of the parent compound, and removal rate in the preliminary batch activated sludge treatment performed in this study. Maximum concentrations found in the aquatic environment or sewage effluent in Japan or foreign countries were also used for another calculation of PEC. Initial risk assessment on the selected pharmaceuticals was performed using the PEC/PNEC ratio. The results of initial risk assessment on the eight selected pharmaceuticals suggest neither urgent nor severe concern for the ecological risk of these compounds, but further study needs to be conducted using chronic toxicity tests, including reproduction inhibition and endocrine disruption assessments.     

日本污染控制概述

日本的环境污染控制大体上经历过工业化早期，二次大战后的恢复发展期和七十年代后的全面控制三个时期，并于七十代下半期后形成了以“注重人类居住环境和文化环境中的生活质量”为特征的环境政策和全面维系环境质量的概念，在水污染控制，固体废弃物管理和大气污染控制方面制订了一系列排放标准和管理标准。     

Household solid waste generation and characteristic in a Mekong Delta city,Vietnam

This study was undertaken to evaluate the quantity and composition of household solid waste to identify opportunities for waste recycling in Can Tho city, the capital city of the Mekong Delta region in southern Vietnam. Two-stage survey of 100 households was conducted for dry season and rainy season in 2009. Household solid waste was collected from each household and classified into 10 physical categories and 83 subcategories. The average household solid waste generation rate was 285.28 g per capita per day. The compostable and recyclable shares respectively accounted for 80.02% and 11.73%. The authors also analyzed the relations between some socioeconomic factors and household solid waste generation rates by physical categories and subcategories. The household solid waste generation rate per capita per day was positively correlated with the population density and urbanization level, although it was negatively correlated with the household size. The authors also developed mathematical models of correlations between the waste generation rates of main physical categories and relevant factors, such as household size and household income. The models were proposed by linear models with three variables to predict household solid waste generation of total waste, food waste, and plastic waste. It was shown that these correlations were weak and a relationship among variables existed. Comparisons of waste generation by physical compositions associated with different factors, such as seasonal and daily variation were conducted. Results presented that the significant average differences were found by the different seasons and by the different days in a week; although these correlations were weak. The greenhouse gas baseline emission was also calculated as 292.25 g (CO₂ eq.) per capita per day from biodegradable components.     

Removal of Linear and Branched p-Alkylphenols from Aqueous Solution by Combined Use of melB Tyrosinase and Chitosan Beads

In this study, melB tyrosinase was applied for enzymatic removal of linear and branched p-alkylphenols from aqueous solutions. First, systematic studies were carried out to estimate the effects of the process parameters such as the temperature, pH value, and enzyme dose on quinone conversion of p-cresol as a model phenol compound. A variety of p-alkylphenols were removed from aqueous solutions through the tyrosinase-catalyzed quinone conversion and subsequent nonenzymatic adsorption of quinone derivatives on chitosan beads at pH 6.0 and 30 °C under the optimum conditions determined for p-cresol. The % removal values of 98–100 were obtained for p-n-alkylphenols. Branched p-alkylphenols with a weak estrogenic activity containing 4-tert-butylphenol and 4-tert-pentylphenol, which underwent no quinone conversion by commercially available mushroom tyrosinase in the absence of H₂O₂, were also effectively removed by further increasing either the melB tyrosinase concentration or the amount of added chitosan beads. The present technique is much effective in the fact that a series of reactions rapidly progress under mild conditions and the chitosan beads can be readily separated from the reaction medium after the enzymatic treatment.     

Evaluating the technical efficiencies of fishing vessels to achieve effective management of overexploited fisheries

Global marine capture fisheries are undergoing serious stress, with overfishing as one of the major problems. In order to mitigate the overexploitation of capture fisheries, government regulation or fisheries management is necessary. Among various management approaches, vessel quantity control is being widely employed. To achieve effective governance of fisheries, the technical efficiency (TE) issue needs to be considered in the implementation of vessel quantity control. Using the Pacific saury (Cololabis saira) stick-held dip net fishery in Japan as a case study, this paper estimated the TE of sampled fishing vessels and explored the possible factors affecting the gap in efficiency. This paper aims to provide suggestions for a better implementation of vessel quantity control in global Pacific saury fishery, and also to serve as an empirical example of integrating TE analysis into management of overexploited fisheries for achieving satisfactory effects. Results show the TE score of the sampled fishery averaged around 0.7 from 2009 to 2014, and factors concerning owners/skippers’ motivation such as vessel ownership and specialization, vessel tonnage as well as skippers’ age show positive effects on the TE. Our findings in the present work provide important strategies for mitigating overexploitation in fisheries. Conducting technical efficiency analysis of targeted fisheries is a vital issue to be considered for designing and realizing an effective implementation of fisheries management approaches. The large vessels and the enthusiasm of vessel owners/skippers need to be particularly addressed when vessel quantity limit is considered to mitigate the problem of overfishing.     

The effects of mating status and time since mating on female sex pheromone levels in the rice leaf bug,Trigonotylus caelestialium

Although mating status affects future mating opportunities, the biochemical changes that occur in response to mating are not well understood. This study investigated the effects of mating status on the quantities of sex pheromone components found in whole-body extracts and volatile emissions of females of the rice leaf bug, Trigonotylus caelestialium. When sampled at one of four time points within a 4-day postmating period, females that had copulated with a male had greater whole-body quantities of sex pheromone components than those of virgin females sampled at the same times. The quantities of sex pheromone components emitted by virgin females over a 24-h period were initially high but then steadily decreased, whereas 24-h emissions were persistently low among mated females when measured at three time points within the 4 days after mating. As a result, soon after mating, the mated females emitted less sex pheromones than virgin females, but there were no significant differences between mated and virgin females at the end of the experiment. Thus, postmating reduction in the rate of emission of sex pheromones could explain previously observed changes in female attractiveness to male T. caelestialium.     

Models for waste life cycle assessment: Review of technical assumptions

A number of waste life cycle assessment (LCA) models have been gradually developed since the early 1990s, in a number of countries, usually independently from each other. Large discrepancies in results have been observed among different waste LCA models, although it has also been shown that results from different LCA studies can be consistent. This paper is an attempt to identify, review and analyse methodologies and technical assumptions used in various parts of selected waste LCA models. Several criteria were identified, which could have significant impacts on the results, such as the functional unit, system boundaries, waste composition and energy modelling. The modelling assumptions of waste management processes, ranging from collection, transportation, intermediate facilities, recycling, thermal treatment, biological treatment, and landfilling, are obviously critical when comparing waste LCA models.This review infers that some of the differences in waste LCA models are inherent to the time they were developed. It is expected that models developed later, benefit from past modelling assumptions and knowledge and issues. Models developed in different countries furthermore rely on geographic specificities that have an impact on the results of waste LCA models. The review concludes that more effort should be employed to harmonise and validate non-geographic assumptions to strengthen waste LCA modelling.     

Initial design process of the sustainability science ontology for knowledge-sharing to support co-deliberation

Implementation of the sustainability science (SS) approach is often difficult because of poor communication between experts from different academic fields. We focused on ontology engineering as a method of knowledge structuring that supports the co-deliberation process. However, SS is too broad for a few experts to construct an ontology because SS targets and covers almost all existing research fields from the viewpoint of problem-solving. The N-iteration process is required for completing an SS ontology. In the present paper, we discuss the initial design process for constructing an ontology on SS from the aspect of a knowledge-sharing tool to support co-deliberation. First, we identified the SS ontology by referring to the existing literature. Second, we traced the structuring process of the SS ontology, which is independent of the existing research domain. Third, we compared the SS ontology with existing ontologies or concept structures on SS. Fourth, we assessed the SS ontology produced in the initial process in terms of relevance and coverage and addressed areas for improvement in order to facilitate co-deliberation among researchers from different domains. As a result of developing the SS ontology and applying it to the mapping tool that we developed based on the ontology, we found the following three points: the SS ontology enables us to define concepts relevant to SS without overlapping by distinguishing part-of and attribute-of relationships at the upper level of the ontology; the SS-based mapping tool successfully represents the potential countermeasures required by the targeted problem for all scientific fields except experimental engineering; however, the SS ontology requires further improvement in order to represent the conceptual linkage arising from compound and secondary problems and the fulfillment of classes at the lower hierarchy of Shortage problem, and requires slots for the entire hierarchy. In addition, based on the discussion of the areas for improvement, we found that missing slots and classes should be added in the process in which we use or improve tools corresponding to a variety of requirements for supporting co-deliberation. In this way, we are able to propose an incremental process for constructing the SS ontology from the aspect of a knowledge-sharing tool to support co-deliberation.     

Glycosylation of bisphenol A by freshwater microalgae

The endocrine disruptor bisphenol A (BPA, 4,4'-isopropylidenediphenol) is used to manufacture polycarbonate plastic and epoxy resin linings of food and beverage cans, and the residues from these products are then sometimes discharged into rivers and lakes in waste leachates. However, the fate of BPA in the environment has not yet been thoroughly elucidated. Considering the effect of BPA on aquatic organisms, it is important that we estimate the concentration of BPA and its metabolites in the aquatic environment, but there are few data on the metabolites of BPA. Here, we focused on freshwater microalgae as organisms that contribute to the biodegradation or biotransformation of BPA in aquatic environments. When we added BPA to cultures of eight species of freshwater microalgae, a reduction in the concentration of BPA in the culture medium was observed in all cultures. BPA was metabolized to BPA glycosides by Pseudokirchneriella subcapitata, Scenedesmus acutus, Scenedesmus quadricauda, and Coelastrum reticulatum, and these metabolites were then released into the culture medium. The metabolite from P. subcapitata, S. acutus, and C. reticulatum was identified by FAB-MS and (1)H-NMR as bisphenol A-mono-O-beta-d-glucopyranoside (BPAGlc), and another metabolite, from S. quadricauda, was identified as bisphenol A-mono-O-beta-d-galactopyranoside (BPAGal). These results demonstrate that freshwater microalgae that inhabit universal environments can metabolize BPA to its glycosides. Because BPA glycosides accumulate in plants and algae, and may be digested to BPA by beta-glycosidase in animal intestines, more attention should be given to levels of BPA glycosides in the environment to estimate the ecological impact of discharged BPA.