Dynamics of the Community of Hole-nesting Birds upon Reduction of Industrial Emissions (the Example of the Middle Ural Copper Smelter)

Russian Journal of Ecology - The dynamics of the species richness, breeding density, and structure of the community of birds occupying nest-boxes upon a 50-fold reduction of atmospheric emissions...     

Quantifying the impact of vegetation-based metrics on species persistence when choosing offsets for habitat destruction

Developers are often required by law to offset environmental impacts through targeted conservation actions. Most offset policies specify metrics for calculating offset requirements, usually by assessing vegetation condition. Despite widespread use, there is little evidence to support the effectiveness of vegetation-based metrics for ensuring biodiversity persistence. We compared long-term impacts of biodiversity offsetting based on area only; vegetation condition only; area × habitat suitability; and condition × habitat suitability in development and restoration simulations for the Hunter Region of New South Wales, Australia. We simulated development and subsequent offsetting through restoration within a virtual landscape, linking simulations to population viability models for 3 species. Habitat gains did not ensure species persistence. No net loss was achieved when performance of offsetting was assessed in terms of amount of habitat restored, but not when outcomes were assessed in terms of persistence. Maintenance of persistence occurred more often when impacts were avoided, giving further support to better enforce the avoidance stage of the mitigation hierarchy. When development affected areas of high habitat quality for species, persistence could not be guaranteed. Therefore, species must be more explicitly accounted for in offsets, rather than just vegetation or habitat alone. Declines due to a failure to account directly for species population dynamics and connectivity overshadowed the benefits delivered by producing large areas of high-quality habitat. Our modeling framework showed that the benefits delivered by offsets are species specific and that simple vegetation-based metrics can give misguided impressions on how well biodiversity offsets achieve no net loss.     

杭州市环境空气中黑碳质量浓度变化特征

采用2013年环境空气自动监测数据,分析杭州市空气中黑碳质量浓度的变化规律,并对变化特征的产生原因进行探讨。结果表明:黑碳测定年均值为4.10μg/m3,日变化有明显双峰结构,峰值出现在早7时和晚8时左右;从季节看,黑碳质量浓度冬季高(5.20μg/m3)、夏季低(3.00μg/m3);黑碳质量浓度与NO2、CO、PM10、PM2.5显著相关,与O3、风速、气温呈负相关,降水对黑碳的清除作用明显。     

A fragment constant QSAR model for evaluating the EC50 values of organic chemicals to Daphnia magna.

The quantitative relationship between the median effective concentration (EC50) of organic chemicals to Daphnia magna and the number of molecular fragments was investigated based on experimental EC50 values for 217 chemicals derived from the literature. A fragment constant model was developed based on a multivariate linear regression between the number of fragments and the logarithmically transformed reciprocal values of EC50. Functional correction factors were introduced into the model. The model was verified using an independent set of randomly selected data. The mean residual of the final model was 0.4 log-units. The robustness of the model was discussed based on the results of three jackknife tests.     

内螺纹变截面铜管拉伸工艺的研究

此文提出了内螺纹变截面铜管分段拉仲一次成形新工艺,并就工艺因素对该管拉伸成形的影响进行了试验研究,从而为合理制订成形工艺提供了依据。     

金属加工过程中应力状态的分析方法

分析简单地拉伸、压缩和扭转的情况时,应力状态能容易地被确定.但是,实际上在金属加工过程中材料是承受复杂的应力状态,在模具——工件接触面上增加有摩擦力.而且,这些应力和摩擦力一般地沿着接触面变化.准确的计算或预测载荷、力、应力和温度,不但对设计适宜的设备是重要的,而且对研究工艺期间材料的变化过程也是重要的.本文将讨论材料变形过程中所运用的主要分析方法及其优缺点.     

圆形烟道烟尘采样点位置确定之正误

采样点位置的确定是烟尘测试中的一项基础工作。在全国沿用10多年的确定圆形圆形烟道烟尘采样点位置的计算表中的数据,经验算有60％有误;原来以烟道中心为基准的计算公式虽然正确,但实用性差。为了进一步完善烟气测试理论,提高监测质量,提出以烟道内壁为基准的新计算公式。运用新、旧2种计算公式得到一致的计算结果—新计算表,进一步证实了原计算表中的错误。     

铝系混凝剂优势形态分析及其混凝特性

聚合氯化铝（PACl）是常用的水处理混凝剂,在应用过程中通常表现出比传统铝盐更为优异的效果.研究表明,这种优异性能主要得益于其特殊的组成,特别是高分子聚合物Al₁₃和Al₃₀独特的物化特性.Al₁₃和Al₃₀是铝离子水解过程中的中间产物,在地球科学和环境化学等领域有着重要的研究价值.于水处理而言,二者的结构和分子特性是研究者关注的重点,大量研究基于此展开,很多重要的发现为实际应用奠定了基础.基于对PACl及其组成性质的研究,本文对PACl的混凝特性及其优势形态分子的分析进行了综合阐述.     

太湖北部小流域沉积物重金属污染特征与评价

近几十年来重金属的沉积记录、来源及污染水平受到了广泛关注.为探明太湖北部小流域重金属的污染来源和环境质量状况,本研究分析了柱状沉积物中8种重金属（Mn、Cr、Zn、Cu、As、Pb、Ni和Co）含量.运用主成分分析法判定污染源,富集因子法表征重金属富集特征,通过熵权模糊模型对沉积物中重金属污染状况进行评价.结果显示,所有重金属含量均较高,高低依次为Mn > Cr > Zn > Cu > As > Pb > Ni > Co.其中Mn含量最高,为380.06~767.69μg/g.沉积物重金属污染的主要贡献因子为交通排放、农业污染和煤炭燃烧.As的富集指数最大（2.89~15.61）.其中77.59%的沉积层属于显著富集,受人类活动影响最为显著.熵权模糊综合评价结果表明,Cu（0.483）和As（0.352）的权重值最大,是沉积物中的首要污染物,且65.52%的沉积层重金属含量处于中度污染水平.     

核壳结构KNbO3@Co(OH)2的制备及其活化过一硫酸盐降解帕珠沙星的研究

制备了以KNbO₃为载体材料的Co（OH）₂复合材料并对其进行了详细的表征,分析了材料的组成成分、组成形态进而确定了其为核壳结构形貌的KNbO₃@Co（OH）₂.利用合成的样品作为催化剂活化过一硫酸盐（peroxymonosulfate,PMS）来降解帕珠沙星（pazufloxacin,PZF）,结果表明制备的催化剂对PZF的去除效率显著增加.讨论了不同初始PMS剂量对降解效率的影响,发现随着PMS增加可活化生成更多的硫酸根自由基（sulfate radicals,SO₄^·-）和羟基自由基（hydroxyl radicals,HO^·）来降解PZF,但继续增大PMS用量降解效率未见明显提升.酸性和中性pH值条件下利于反应活化PMS降解PZF,而碱性体系减缓反应,甚至强碱体系更易形成Co（OH）₂沉淀不利于反应体系中活性组分CoOH⁺的形成,大大抑制了催化性能.此外,在体系中加入淬灭剂叔丁醇（tert-Butanol,TBA）或者乙醇（ethanol,ETOH）进行自由基的淬灭实验,结果表明SO₄^·-自由基为体系降解PZF过程中主要贡献的自由基,而HO^·自由基的贡献较少.催化剂具有较好的稳定性5次循环之后仍能在10 min之内完全去除PZF.本研究提出了新的思路为制备其他载体的Co（OH）₂核壳结构提供参考依据,同时将该催化剂结合高级氧化技术应用到水体新兴有机污染物净化领域具有很好的应用前景.