纵向通风对隧道竖井排烟影响的模拟研究

通过开展小尺寸实验以及FDS数值模拟实验,研究纵向通风对不同高度竖井的排烟影响并确定最佳通风风速。通过分析纵向通风风速、竖井高度对吸穿现象、边界层分离的影响规律,讨论了吸穿现象的临界条件。小尺寸实验中纵向通风风速考虑了0.096 m/s、0.226 m/s、0.356 m/s、0.485 m/s、0.629 m/s五种工况,竖井高度考虑了0.133 m、0.2 m、0.333 m、0.533 m四种工况。实验结果表明:当纵向通风风速为0.096 m/s、0.226 m/s、0.356 m/s(对应实际风速0.37 m/s、0.87 m/s、1.38 m/s)时,可抑制吸穿现象,但烟气边界层分离现象随着风速的增加而加剧。吸穿现象临界判据F_(critical)=1.5在本文所测试的纵向通风条件下不再适用,但Ri′_(critical)=1.5依然适用。数值模拟结果表明:当竖井高度为1 m、1.5 m、2 m时,排烟量随纵向通风的增加而降低,而当其为3 m、4 m、5 m时,排烟量先上升后降低,在测试风速为1.5 m/s时达到最高值。     

Tolerance of calluna vulgaris and peatland plant communities to sulphuric acid deposition

Critical loads offer a unique way of evaluating impacts of acid deposition by quantifying environmental sensitivity. The critical loads of acidity for UK peat soils have been based upon an arbitrary reduction in pH of 0.2 units. This chemical shift needs to be better related to adverse effects on sensitive biological receptors. It is known that effective precipitation pH equates closely to soil solution pH, and the latter is directly linkable to biotic effects of pH change. On continuation of a long-term experiment assessing impacts of simulated acid rain on peat microcosms in a realistic outdoor environment, Calluna vulgaris continued to flourish at acid deposition loads well above the existing critical load. Calluna plants were harvested and analysed, and acid deposition treatments to the microcosms continued to allow natural vegetation to regenerate. A diverse mixture of moorland plants and bryophytes established at acidity treatments well above the existing critical load, and only a very high acid load resulted in no natural regeneration. A critical effective rain pH value of 3.6 is suggested as a basis for setting critical loads. At this pH, Calluna grows well, and a healthy diverse vegetation community re-establishes when harvested. It is suggested that the peat critical load should be set at the acid load that, at any specific site, would result in a mean effective precipitation pH of 3.6.     

Diagnosis,surveillance, and treatment of the anemic fetus using middle cerebral artery peak systolic velocity measurement

The in utero course of the anemic fetus has improved dramatically, owing to early diagnosis and cordocentesis transfusion. In utero invasive procedures such as amnio- and cordocentesis have become important modalities in the evaluation and treatment of anemic fetuses. However, they carry risks for both the mother and fetus. A valid and sensitive noninvasive means of following the anemic fetus is the evaluation of changes in the middle cerebral artery peak systolic flow velocity (MCA-PSV). This is a sensitive tool for both the evaluation of fetal anemia and response to treatment. Intracerebral vessels respond earliest to the fetal anemic state, and are readily accessible for ultrasound examination. We describe the methodology and evolving clinical applications of MCA-PSV measurement in the fetus, through an overview of the literature describing the development and application of MCA-PSV measurement in fetuses at risk of fetal anemia of various immune and nonimmune etiologies, illustrated by index cases from our center. MCA-PSV measurement is essential in the diagnosis, evaluation, and management of cases of fetal anemia. The use of this modality lessens the need for invasive procedures. The method is readily accessible and should be integrated into the repertoire of all obstetric ultrasound centers. Copyright © 2006 John Wiley & Sons, Ltd.     

高温条件下高速碰撞试验技术研究

目的建立高温条件下结构的高速碰撞试验技术。方法基于理论和试验方法,研究影响试样加热/保温、碰靶速度和姿态的关键因素,利用次口径发射技术和电炉技术实现试样的加热、保温和加速。采用间接方法测试试样碰靶时的温度,联合应用次口径发射技术和靶体,控制试样的碰靶姿态,并利用高速摄影技术对其进行测试。通过薄壁圆柱筒的高温高速碰靶验证高温试验技术的有效性。结果建立了加热、加速和姿态控制一体化的高温高速碰撞试验技术,获得了不同尺寸薄壁圆柱筒不同姿态碰靶时的高温冲击动力学响应。正碰时,撞击端镦粗,尾端收缩,尾端的凹陷大于碰撞端的变形;侧碰时,圆筒呈马鞍状;角碰时的变形为楔形。随着圆筒的强度和刚度的降低,圆筒的变形增加,整体发生坍塌,出现大量的皱褶。结论建立的试验技术切实有效,可以用于高温条件下结构高速碰撞效应的研究。     

大气细菌,霉菌数量与风速相关性初探

通过对大气细菌数量、霉菌数量与风速相关性的研究,得出齐市地区冬季气候寒冷,无相关性;春季气候干燥,风沙大,有相关性;雨后大气细菌数量与风速无相关性,大气霉菌数量与风速相关。     

斜管沉淀池应用中存在问题的探讨

斜管沉淀池是目前广泛使用的污水物化处理工艺。针对实际应用所遇到的问题，如沉淀池进口布水不均匀，致使出水水质下降，从沉淀的基础理论，通过水力学的分析，较深入地说明了斜管沉淀池矾花泛起，水质恶化的原因。并提出了应用斜管沉淀池应注意的事项。     

UASB反应器中颗粒污泥的沉降性能与终端沉降速度

从流体力学角度,通过建立沉降速度模型探讨了UASB反应器中颗粒污泥的沉降性能与终端沉降速度．计算结果表明,(1)绝大多数颗粒污泥的沉降过程属于过渡区(1＜Re＜100)而非层流区,其沉降速度与直径成正比,可用Allen公式进行计算;(2)颗粒污泥的终端沉降速度远高于厌氧反应器中废水的上流速度,其良好的沉降性能解决了在高负荷情况下污泥的流失问题．所建模型能较好地反映实际条件下的情况．为厌氧反应器的工艺设计与正常运行提供理论依据．     

DPIV技术测量流冰速度应用研究

基于数字信号分析原理,对连续两幅图像进行互相关分析,寻找互相关函数的峰值;应用数字粒子图像测速(digital particle image velocimetry)技术,并通过计算机VC编程,解决了用于雷达测量单点流冰速度的不足;为大范围区域内流冰场瞬时速度的计算,实时雷达测量辽东湾海上流冰速度场提供了有应用价值的方法.     

煤矿风井轴流风机噪声控制设计计算

煤矿风井轴流风机气流速度大,扩散口噪声辐射强度高达113dB(A),降噪难度较大的低频成份突出。正确合理的低频噪声控制设计计算是噪声控制成功的关键。     

城市污水厂污泥堆肥中试实验研究

城市污水厂污泥由于产生量大且成分复杂，如何对它进行稳定化、无害化处理已越来越受到人们的关注。本研究基于好氧发酵仓式堆肥系统，研究了城市污泥处理过程中温度、含水率、pH、有机质、水溶性有机碳、总氮和发芽指数等指标参数的变化规律。研究结果表明：当物抖初始含水率控制在65％左右时，在强制通风量112．5m^3／12hr，搅拌频率30min/24hr的工艺条件下，堆肥过程可以实现顺利升温并在55℃以上维持3天，满足杀灭致病茵要求的条件；14天反应用期结束时，物抖含水率、水溶性有机碳和有机质含量显著降低，堆肥产品腐熟，卫生学指标达到了美国EPA污泥产品A类标准；得列的污泥产品成为性质优良的土壤质量调节荆。