A product analysis-based study on the mechanism of inflammable gas explosion suppression

To study the mechanism of the suppressing effect of Expanded Aluminium (EA) on the premixed gas explosion, premixed methane-air and propane-air gases were undergone explosion reaction in the presence of EA in a self-designed closed pipeline with the overpressures and the compositions, rates and sensitivities of products analyzed. The results showed that the 9.5% methane-air and 5% propane-air explosions produced peak pressures decreased by 79.3% and 65.6%, and residual methane and propane contents increased by 270% and 560% respectively than without EA. In addition, the results revealed that the explosions of propane in the presence of EA produced less methane and carbon oxides contents, but more ethylene and propylene contents. The simulation showed that H, O, and OH are the key factors affecting the rate of products. The product compositions, together with other parameters, suggested that EA decreased temperature, inhibited chain initiation and propagation reaction, but facilitated chain termination reaction by advancing and accelerating the gas phase and wall destruction reaction of radicals, especially collisions and concentration of key free radicals. This new research method based on the analysis of explosion products can be used for in-depth research into gas explosion features and shed light on the suppressing mechanism of EA in flammable gas explosion.     

Study of the influence of melamine polyphosphate and aluminum hydroxide on the flame propagation and explosion overpressure of aluminum magnesium alloy dust

When aluminum magnesium alloy dust floats in the air, a certain ignition energy can easily cause an accidental explosion. To prevent and control the occurrence of accidental explosions and reduce the severity of accidents, it is necessary to carry out research on the explosion suppression of aluminum magnesium alloy dust. This paper uses a vertical glass tube experimental device and a 20 L spherical explosive experimental device to carry out experimental studies on the suppression of the flame propagation and explosion overpressure of aluminum magnesium alloy dust with melamine polyphosphate (MPP) and Al(OH)₃. With increasing MPP and Al(OH)₃ concentrations, the flame brightness darkened, the flame velocity and propagation distance gradually decreased, and P_max and (dp/dt)_max decreased significantly. When the amount of MPP added reached 60%, the flame propagation distance decreased to 188 mm, which is a decrease of 68%, and the explosion overpressure decreased to 0.014 MPa, effectively suppressing the explosion of aluminum magnesium alloy dust. The experimental results showed that MPP was more effective than Al(OH)₃ in inhibiting the flame propagation and explosion overpressure of the aluminum magnesium alloy dust. Finally, the inhibitory mechanisms of the MPP and Al(OH)₃ were further investigated. The MPP and Al(OH)₃ endothermic decomposition produced an inert gas, diluted the oxygen concentration and trapped active radicals to terminate the combustion chain reaction.     

Study on acceleration and suppression properties of coal gangue with different void fractions on gas explosion propagation

Gas explosion is one of the main disasters in coal mining. Plenty of coal gangue are generally distributed in the disaster areas in gob. Experiments were carried out to explore the propagation law of the gas explosion distributed by coal gangue. The variation characteristics of the overpressure, pressure rise rate, and flame shape with void fractions were analyzed. The results showed that the effect of the coal gangue on the explosion intensity changed from suppression to acceleration with the increase of void fraction, the flame front upstream blockage area changed from laminar state to turbulent divergent state, and a reverse flame was formed. When the void fraction of the coal gangue was 0.50–0.65, the maximum overpressure downstream of the blocked area were positively correlated with the void fraction and the critical suppression range was between 0.50 and 0.55. When the void fraction was lower than 0.50, the flame was quenched in the coal gangue, neither the flame nor the pressure could pass through the blocked area. It is helpful to guide the improvement of coal recovery process to avoid the expansion of the explosion impact in coalmine gob.     

Effects of nitrogen and carbon dioxide on hydrogen explosion behaviors near suppression limit

By varying inert gas content, equivalence ratio and initial pressure, this study is aimed at investigating flame propagation behaviors and explosion pressure characteristics near suppression limit. For carbon dioxide, the weakest flame floating phenomenon is observed at Φ = 1.5 and the buoyant instability is enhanced when the equivalent ratio deviates to the rich and lean sides. For nitrogen, the buoyant instability decreases with increasing equivalent ratio. Both maximum explosion pressure and maximum pressure rise rate increase firstly and then decrease with the increase of equivalence ratio, and they decrease significantly with increasing content of carbon dioxide and nitrogen. For carbon dioxide, the critical suppression ratio of Φ = 0.6, 0.8, 1.0, 1.5 and 2.0 is 7.50, 7.18, 5.74, 3.83, and 2.87. For nitrogen, the critical suppression ratio of Φ = 0.6, 0.8, 1.0, 1.5 and 2.0 is 15.83, 11.87, 9.50, 6.33 and 4.75. Compared to nitrogen, the carbon dioxide is more effective on suppressing hydrogen explosion pressure. The adiabatic flame temperature, thermal diffusivity and mole fraction of active radicals continue to decrease with increasing content of carbon dioxide and nitrogen, which contributes to the decrease of laminar burning velocity.     

Suppression of flame propagation in a long duct by inertia isolation with inert gases

Experimental studies were done with a small pipe with a diameter of 0.043 m and a large pipe with a diameter of 0.49 m to demonstrate the flame propagation suppression with inertia isolation in a long duct. Tests were carried in an ignition section containing propylene/air mixture near stoichiometric concentration and generating a peak flame propagation speed of approximately 100 m/s. The ignition section is connected to a section filled with an inert gas, another section with flammable mixtures, and finally a sufficiently long, ambient section to accommodate flame propagation. The critical length of the inert gas section required for successful suppression of flame from the igniting the flammable section is found to be 0.6 m for CO₂ and 0.9 m for N₂ in the large pipe and 0.2 m for CO₂ and 0.3 m for N₂ in the small pipe. Additional tests with a 3 m of ignition section and peak flame propagation speed of 225 m/s showed that the critical length for successful suppression by CO₂ is only increased slightly to 0.9 m, confirming that the suppression is a result of inertia isolation rather than inert gas dilution. Finally, application of the results in responding to large-scale leak into a long, underground duct is discussed.     

Prevention and suppression of explosions in gas-air and dust-air mixtures using powder aerosol-inhibitor

The prevention and suppression of explosions is a very topical field of research because annually hundreds of coal mine workers became their victims. In this research a very effective powder “powder for suppression of explosions” (“PSE”) for the suppression of explosions has been developed and tested. The experiments on suppression of explosions of a methane–air mixture (MAM) at a laboratory conditions using “PSE”-powder have been carried out. The possibility of lowering the power of coal-dust explosion with the help of a “PSE”-powder has been investigated. The feasibility of almost instantaneous disperse of powders using intentionally created mini-explosions (ammonal) was investigated. The barrel-suppressor of explosion in the experimental adit (tunnel) was studied and the large-scale tests for suppression of MAM-explosions in experimental adit were also subjects of study.     

Influence of non-reactive particle cloud on heterogeneous detonation propagation

An interaction of a detonation wave propagating in the cellular detonation mode with a cloud of inert particles is investigated numerically. The analysis of results allows the regimes of propagation of the heterogeneous plane Chapman–Jouguet and cellular detonations and their suppression to be identified. The influence of various parameters of the inert cloud is demonstrated. The critical length of the cloud sufficient for detonation suppression is determined. It is shown that the disperse composition and the nonuniform distribution of particles in the cloud are important parameters affecting the detonation propagation mode.     

Suppression pheromone and cockroach rank formation

Although agonistic behaviors in the male lobster cockroach (Nauphoeta cinerea) are well known, the formation of an unstable hierarchy has long been a puzzle. In this study, we investigate how the unstable dominance hierarchy in N. cinerea is maintained via a pheromone signaling system. In agonistic interactions, aggressive posture (AP) is an important behavioral index of aggression. This study showed that, during the formation of a governing hierarchy, thousands of nanograms of 3-hydroxy-2-butanone (3H-2B) were released by the AP-adopting dominant in the first encounter fight, then during the early domination period and that this release of 3H-2B was related to rank maintenance, but not to rank establishment. For rank maintenance, 3H-2B functioned as a suppression pheromone, which suppressed the fighting capability of rivals and kept them in a submissive state. During the period of rank maintenance, as the dominant male gradually decreased his 3H-2B release, the fighting ability of the subordinate gradually developed, as shown by the increasing odds of a subordinate adopting an AP (OSAP). The OSAP was negatively correlated with the amount of 3H-2B released by the dominant and positively correlated with the number of domination days. The same OSAP could be achieved earlier by reducing the amount of 3H-2B released by the dominant indicates that whether the subordinate adopts an offensive strategy depends on what the dominant is doing.     

Metal hydride fires and fire suppression agents

Most metal hydrides are pyrophoric and water-reactive. Summaries of metal hydride fire incidents are presented to illustrate ignition scenarios, threats to personnel and equipment, and fire suppression experiences. Met-L-X™, a sodium chloride-based, certified, Class D fire suppression agent, has successfully extinguished some metal hydride fires by coating the hydride and excluding air access. However, the still hot hydride is prone to re-ignition upon surface disturbance, such as may be necessary during disposal. Previously reported testing of various Class D agents and moist sand for sodium hydride fires is reviewed here along with certification and ad hoc testing of existing Class D agents and recent testing of a new candidate Class D agent. Hydride explosibility testing is also briefly summarized. Additional fire and explosibility tests, as well as suppression agent reactivity evaluations, are recommended.     

Experimental study on methane explosion characteristics with different types of porous media

Porous media has a significant effect on flame and overpressure of methane explosion. In this paper, the pore diameter and thickness of porous media are studied. Nine experimental combinations of different pore diameter and thickness on the propagation of flame and overpressure of methane explosion in a tube are analyzed. The results show that the porous media not only can suppress the explosive flame propagation, but the porous media with large pore diameter can cause deflagration and accelerate the transition of flame from laminar to turbulent. The pore diameter of the porous media mainly determines the quenching of the flame. Simply increasing the thickness of porous media may cause the flame to temporarily stop propagating, but the flame is not completely extinguished for larger pore diameter. However, the deflagration propagation speed of flame is affected by the thickness. The attenuation of overpressure by porous media is mainly reflected in reducing the duration of overpressure and the peak value of overpressure. The smaller the pore diameter, the greater the thickness, and the more remarkable the reduction in overpressure duration and peak value. Suitable pore diameter and thickness of porous media can effectively suppress flame propagation and reduce the maximum value and duration of overpressure.