Emissions of VOCs at Urban Petrol Retail Distribution Centres in India (Delhi and Mumbai)

Air pollution has assumed gigantic proportion killing almost half a million Asians every year. Urban pollution mainly comprises of emissions from buses, trucks, motorcycle other forms of motorized transport and its supporting activities. As Asia's cities continue to expand the number of vehicles have risen resulting in greater pollution. Fugitive emissions from retail distribution center in urban area constitute a major source. Petrol vapours escape during refueling adding pollutants like benzene, toluene, ethylbenzene and xylene to ambient air. This paper discusses a study on fugitive emissions of Volatile Organic Compounds (VOC) at some refueling station in two metropolitan cities of India, i.e., Mumbai and Delhi. Concentration of VOCs in ambient air at petrol retail distribution center is estimated by using TO-17 method. Concentration of benzene in ambient air in Delhi clearly shows the effect of intervention in use of petroleum and diesel fuel and shift to CNG. Chemical Mass Balance (CMB) model is used to estimate source contributions. At Delhi besides diesel combustion engines, refueling emissions are also major sources. At Mumbai evaporative emissions are found to contribute maximum to Total VOC (TVOC) concentration in ambient air.     

以最经济输水为原则 调整高压输水泵及工艺

简这了炼油厂更新高压输水泵，调整输水工艺、降低输水成本的方法。     

胜利油田油井动态异常干扰排除研究

本文通过对油井采油工艺和油藏地质的分析,探讨了油井动态异常干扰影响因素与形成机制,确定了由非地震前兆因素引起的油井动态干扰异常的排除方法和步骤,进一步讨论了今后地震观测油井在选井中应该注意的几个问题。     

Continuous subcutaneous insulin infusion (CSII) in pregnant diabetic patients

The efficacy of the insulin infusion pump (CSII) in pregnancy was examined in 12 diabetic patients and compared with intermittent insulin therapy (IIT). In patients poorly controlled on IIT constant and rapid equilibrium was achieved with CSII (mean of glucose levels: CSII versus IIT=84 versus 137 mg/dl; S.D. = 36 versus 63 mg/dl; mean amplitude of glycemic excursion (MAGE)=65 versus 112 mg/dl. In patients well controlled on IIT, CSII led to a reduction in the variation of glucose excursions (S.D.= 29 versus 36 mg/dl; MAGE=48 versus 76 mg/dl). CSII generally produced a reduction of 20–37 per cent of daily insulin dose (in three cases there was an increase of dose with the achievement of glycemic control). Furthermore in CSII treated-patients amniotic glucose, insulin and C-peptide concentrations werefound tobeinthenormalrange(22.1±10.1 mg/dl; 5.2±2.7μ/ml; 1.25±0.71 ng/ml, respectively). All infants were horn at or near-term, had no macrosomia or neonatal problems. It is concluded that CSII is a highly efficient way to achieve normal glucose levels in pregnancy, not only in type I, hut also in type II or gestational diabetes.     

VE泵端面凸轮冷/温复合成形技术研究

采用温锻制坯与冷摆辗相结合的复合成形工艺生产VE泵端面凸轮精密成形件,不仅材料利用率可达到95%左右;而且成形件的尺寸精度高,表面光洁度高,能有效地减少后续仿形磨削加工的余量,从而降低了生产成本,提高了生产效率。采用该工艺可以进行大批量生产,能满足我国轻型汽车VE泵的生产需要。     

喷射浮选处理含油污水的研究

重点对喷射浮选处理含油污水进行了试验研究，结果表明浮选室内射流泵的没水深度对喷射选除油效果有较大的影响，并且只有在气泡量大并充满浮选室及表面相对平静的状态下，才儿得较好效果，为此，我们在浮选室内加入自制的增料，使兼并的气海重新得到分散，消耗了一部分动能，减缓了浮选室的扰动，使除在大提高，从而为研制新型高效的喷射浮选设备提供了一条新途径。     

新型射汽抽气消声器

介绍了一种自行设计的、新型的汽轮机启动抽气器排汽消声装置，并对其结构原理和设计特点进行了较详细的叙述。应用实践表明，此种消声器降噪效果明显。     

矿井井筒提升设备绕流的数值模拟

基于经典的流体力学理论,建立罐笼绕流的二维RNGκ-ε湍流模型,分析其初始边界条件,并结合工程实际应用FLUENT计算流体动力学软件模拟罐笼运行时井筒内流场及压力场,得出井筒内流场及压力场的变化规律。研究结果表明:在罐笼运行期间,由于空间受限而引发活塞效应,井筒内压力发生瞬态变化,造成通风系统的压力波动,导致气流运动的动态改变,对通风系统稳定性有一定的影响。     

水源热泵空调系统的水质处理技术

针对影响水源热泵系统运行效能的地下水水质和回灌过程中井堵塞的问题,提出相应的水质处理方法和水源热泵用地下水水质参考标准.     

Filtering with a drill pump: an efficient method to collect suspended sediment

Water quality monitoring programs across multiple disciplines use total suspended solids (TSS), and volatile suspended solids (VSS), to assess potential impairments of surface water and groundwater. While previous methods for instream filtering have been developed, the need for rapid, cost‐effective, high volume sampling has increased with the need to verify and supplement data produced by sondes and instantaneous data loggers. We present an efficient method to filter water instream with a portable drill pump that results in reduced sample processing time, and potentially reduced error associated with sample transportation, preservation, contamination, and homogenization. This technical note outlines the advantages of filtering instream vs. in the laboratory. It also compares TSS and VSS concentrations filtered with a drill pump vs. standard filtration methods with a vacuum pump as outlined by USEPA methods 160.2 and 160.4. Samples were collected at 4 sites and filtered in the field, or transported to the laboratory and filtered within 12 or 24 h of collection. Overall TSS and VSS samples filtered instream with a drill pump vs. in the laboratory produced similar concentrations with a similar range in variability for each method. Sample filtering with a drill pump decreased processing time by five minutes per sample.