某电厂600MW火电机组脱硫增容改造方案探讨

按照国家环保部文件要求，大唐集团河北某电厂600 MW机组湿法脱硫系统需进行增容改造。该电厂根据实际情况，归纳了3种可行的脱硫增容改造方案，即原吸收塔增加喷淋层和高度、双吸收塔串联、双吸收塔双循环，阐述了各自的技术特点，结合性能保证、工程投资、施工周期等影响因素，比较了各方案的优缺点。经过对比和论证，双吸收塔方案比单吸收塔方案更适合于本次工程改造。     

冲击水浴喷雾式除尘器的应用

介绍了冲击水浴喷雾式除尘器在柳钢焦化厂的应用试验情况，制作安装，调试运行后检测鉴定表明，冲击水浴喷雾式除尘器应用在冶金焦末粉尘上，不但操作简单，维护方便，除尘效率高，效果好，而且成本低廉，只有电除尘器或布袋除尘器的20%左右。     

亚氧化钛膜电极电化学特性及其处理印染工业废水的效能研究

电化学氧化法具有稳定高效、操作灵活、集成度高等特点,在处理难降解有机废水领域具有独特优势.电化学废水处理过程通常受限于传质速率,而膜电极有望解决这一瓶颈问题.亚氧化钛膜电极（TiSO-ME）的化学结构与电化学性质结果显示,经过高温还原法制备的TiSO-ME电极主要由Ti₄O₇和少量Ti₅O₉组成,大孔体积占总孔体积的92.7%,平均孔径为0.508 μm.电化学测试结果表明,TiSO-ME具有良好的导电性、高析氧电位和电化学稳定性.过滤试验结果表明,在0.82×10^-3~3.14×10^-3 mL·cm^-2·s^-1范围内膜通量与传质系数成正比.在电流密度为8 mA·cm^-2,膜通量为2.31×10^-3 mL·cm^-2·s^-1的条件下,电解1.5 h即可有效处理实际印染工业废水,sCOD去除率高达96.07%,电流效率可达24.22%,电能消耗较不存在膜通量时降低了32.99%.TiSO-ME能够实现废水在膜孔结构内部的穿流式操作,有效克服旁流式操作传质受限的问题,在小规模分散式工业废水处理中有着重要的研究价值和发展潜力.     

CeO2形貌结构对催化湿式空气氧化苯酚性能的影响

采用水热法、沉淀法和溶胶凝胶法制备了3种不同形貌的CeO₂催化材料,并将其用于湿式空气氧化苯酚水溶液过程中,探讨了CeO₂形貌结构对催化湿式氧化苯酚水溶液性能的影响.采用扫描电子显微镜（SEM）、透射电子显微镜（TEM）、X射线衍射（XRD）、程序升温还原（TPR）等手段对CeO₂催化材料进行了表征.结果表明,水热法制备的CeO₂催化材料表现出较好催化性能,主要原因是水热法合成的CeO₂呈现交错的纳米棒状结构,主要暴露（220）晶面,且沿着（220）晶向生长.在反应温度为200℃、空气压力为2MPa、苯酚初始浓度500mg/L的条件下,最终（240min）COD的去除率为95.5%.     

大气沉降向华中丘陵区稻田输入硫通量的观测

选取我国华中丘陵区的湖南省长沙县一个典型水稻种植区,对2015与2016年2年雨水样中的SO₄²-S和大气SO₂的沉降量进行监测,分析雨水中SO₄^2-、NO₃^-的关系,解析大气硫沉降的主要来源.结果表明,研究区大气中SO₂-S和雨水中SO₄^2--S的年均浓度分别为8.5 μg/m³和1.1mg/L,大气硫沉降年均总量为26.8kgS/（hm²·a）,其中年均降雨混合沉降量18.2kgS/（hm²·a）,年均干沉降量为8.6kgS/（hm²·a）.研究区域硫素干、混合沉降量存在明显的季节差异,硫素混合沉降春季高于夏、秋、冬季,而硫素干沉降冬季高于春、夏、秋季.雨水中NO₃^-/SO₄^2-的质量比大多小于1,表明研究区大气硫素主要来自固定污染源（燃煤）.华中丘陵区稻田具有较高的硫沉降,但硫沉降量已较21世纪初出现了较大幅度下降,农业生产中需要根据农田硫素收支状况酌情补充硫肥来保证作物高产稳产.     

A Global Overview of Atmospheric Acid Deposition Fluxes

This paper presents a summary of globalacid deposition flux data taken from a globalassessment report on acid deposition prepared forUNEP/WMO (Whelpdale and Kaiser, 1996). There is a largevariation in the spacial coverage and reliability ofmonitoring around the world. Many more stationsmeasure wet deposition than collect appropriate datafor estimating dry deposition. The widespread regionswith highest precipitation concentrations anddeposition fluxes of sulphate and nitrate coincideclosely with the regions of highest density ofSO₂ and NO_x precursor emissions occurringprimarily in the mid-latitude, northern hemispherebelt where a large fraction of the worlds fossilfuels is consumed. Organic acids in precipitation makea minor contribution to acidity (<20%) inindustrial regions, but in the rest of the world theyare of same order, or even exceed, inorganic acids.Less is known about dry deposition, but it appears topredominate near strong emission sources with wetdeposition predominating farther downwind. The molarratio of the N/S contribution to acidic deposition isclose to 1.0 over large areas of Europe and NorthAmerica, but is highly variable elsewhere, beinghighest in equatorial regions due to biomass burningand lowest near smelters and other large sources of SO₂.     

自动电位滴定法测定水中氯离子

以银电极为响应电极，用硝酸银溶液滴定水中氯离子，等当点时，产生电位突跃，以此确定终点电位，在仪器上锁定的此终点电位值，从而完成样品的自动分析。     

过氧化聚吡咯/聚乙烯吡咯烷酮修饰碳糊电极测定废水中苯酚

建立了过氧化聚吡咯(OPPy)和聚乙烯吡咯烷酮(PVP)修饰碳糊电极测定废水中苯酚的方法.优化了试验条件,苯酚的氧化峰电流在1.0×10-5 mol/L～1.0×10-3 mol/L之间线性关系良好,检出限为1.0×10-6 mol/L.该电极制作简单,选择性好,测定灵敏度高,精密度与准确度均符合要求.     

Preparation of rare-earth metal complex oxide catalysts for catalytic wet air oxidation

Catalytic wet air oxidation (CWAO) is one of the most promising technologies for pollution abatement. Developing catalysts with high activity and stability is crucial for the application of the CWAO process. The Mn/Ce complex oxide catalysts for CWAO of high concentration phenol-containing wastewater were prepared by coprecipitation. The catalyst preparation conditions were optimized by using an orthogonal layout method and single-factor experimental analysis. The Mn/Ce serial catalysts were characterized by Brunauer-Emmett-Teller (BET) analysis and the metal cation leaching was measured by inductively coupled plasma torch-atomic emission spectrometry (ICP-AES). The results show that the catalysts have high catalytic activities even at a low temperature (80°C) and low oxygen partial pressure (0.5 MPa) in a batch reactor. The metallic ion leaching is comparatively low (Mn<6.577 mg/L and Ce<0.6910 mg/L, respectively) in the CWAO process. The phenol, COD_Cr, and TOC removal efficiencies in the solution exceed 98.5% using the optimal catalyst (named CSP). The new catalyst would have a promising application in CWAO treatment of high concentration organic wastewater. Translated from Techniques and Equipment for Environmental Pollution Control, 2005, 6(2): 40–44 [译自: 环境污染治理技术与设备]     

BOD5测定方法的研究

通过对比实验，对BOD5的测定方法进行研究，探索用氧电极法测定BOD5的可能性和可行性，对其不足之处提出相应的解决措施，使之能更适用于科研、监测教学等方面的需要。