碘酸钾—三溴偶氮氯膦催化光度法测定水样中的痕量锰

研究了以氨三乙酸（NTA）作活化剂,在pH=4.74的HAc—NaAc缓冲溶液介质中,Mn（Ⅱ）催化碘酸钾氧化三溴偶氮氯膦的褪色反应。通过实验,确定了该反应体系的最佳条件,由此建立了一个测定痕量锰的新方法。本方法的检出限是2.3×10^-9g/ml,测定范围为0.0-100.0 mg/L。该法具有较好的选择性,用于环境水体试样中痕量锰的测定,结果令人满意。     

Morphology-dependent interfacial interactions of Fe2O3 with Ag nanoparticles for determining the catalytic reduction of p-nitrophenol

In this work,we fabricated three kinds of Ag/Fe_2O_3 model catalysts with different morphologies to study the interfacial interactions between Ag and Fe_2O_3,and how they affected the catalytic activity in hydrogenation of p-nitrophenol was explored.The hydrothermal method was used to synthesize the metal oxide supported silver catalyst,with various morphologies including nanoplates(NPs),nanospheres(NSs),and nanocubes(NCs).The crystal structure,morphology and surface elements of the composite were investigated by various measurements,such as X-ray diffraction(XRD),scanning electron microscopy(SEM),transmission electron microscopy(TEM) and X-ray photoelectron spectroscopy(XPS).The catalytic activity was also evaluated by the reduction of p-nitrophenol to p-aminophenol.It was found that the activities of the above catalysts varied with the morphology of the support.Among them,Ag/Fe_2O_3 NPs promoted the highest performance,Ag/Fe_2O_3 NSs were slightly inferior,and Ag/Fe_2O_3 NCs were the worst.At last,we ascribed the remarkable activity of Ag/Fe_2O_3 NPs to the strong metal-support interactions between Ag and Fe_2O_3.     

海水中阴极极化对X80钢应力腐蚀及氢脆敏感性的影响

目的研究不同p H值海水中阴极极化对X80管线钢应力腐蚀及氢脆的抑制作用。方法采用慢应变速率拉伸试验、电化学测试、微观组织观察等分析方法。结果 X80钢在天然海水中的析氢电位约为-940m V(vs.SCE,下同),海水p H为3.5时析氢电位发生正移。其应力腐蚀敏感性与极化电位有很大关系,随着极化电位负移,X80钢的氢脆敏感性增加。天然海水中当极化电位负于-950 m V时,断口出现准解理断裂特征形貌。在-1050 m V极化电位下,钢材进入氢脆断裂区发生脆性断裂。海水p H为3.5时,-900 m V钢材有发生氢脆的危险。结论与天然海水相比,X80钢在p H为3.5的酸性海水中具有较高的应力腐蚀敏感性,两种海水介质中X80钢的应力腐蚀敏感性均随极化电位负移而增加。     

环境样品中痕量锰的催化动力学测定法

对环境样品中痕量锰的催化动力学测定方法进行简要评述，引述文献１６篇。     

催化燃烧法处理炼油污水处理场臭气

介绍了污水处理场臭气来源、危害和影响，从技术、经济和环境效益等方面对几种处理方法进行了比较，提出了采用催化燃烧法的技术实施方案。     

Synergistic effect of F and triggered oxygen vacancies over F-TiO2 on enhancing NO ozonation

Oxidation-absorption technology is a key step for NO_x removal from low-temperature gas. Under the condition of low O₃ concentration (O₃/NO molar ratio = 0.6), F-TiO₂ (F-TiO₂), which is cheap and environmentally friendly, has been prepared as ozonation catalysts for NO oxidation. Catalytic activity tests performed at 120°C showed that the NO oxidation efficiency of F-TiO₂ samples was higher than that of TiO₂ (about 43.7%), and the NO oxidation efficiency of F-TiO₂-0.15 was the highest, which was 65.3%. Combined with physicochemical characteristics of catalysts and the analysis of active species, it was found that there was a synergistic effect between F sites and oxygen vacancies on F-TiO₂, which could accelerate the transformation of monomolecular O₃ into multi-molecule singlet oxygen (¹O₂), thus promoting the selective oxidation of NO to NO₂. The oxidation reaction of NO on F-TiO₂-0.15 follows the Eley-Rideal mechanism, that is, gaseous NO reacts with adsorbed O₃ and finally form NO₂.     

小口径弹药筒失效分析

通过宏观观察、微观断口分析、成分分析、金相分析和磁粉探伤等方法对靶试后出现开裂的某小口径弹药药筒进行了失效分析.该药筒的裂纹处有明显的压痕,断口微观形貌韧性特征明显,药筒钢材的化学成分、夹杂物含量和显微组织均符合规定的要求,磁粉探伤表明其表面、近表面无缺陷.认为药筒表面的压痕是导致药筒开裂的主要原因.     

In-situ-reduced synthesis of cyano group modified g-C3N4/CaCO3 composite with highly enhanced photocatalytic activity for nicotine elimination

Graphite carbon nitride has many excellent properties as a two-dimensional semiconductor material so that it has a wide application prospect in the field of photocatalysis. However, the traditional problems such as high recombination rate of photogenerated carriers limit its application. In this work, we introduce nitrogen deficiency into g-C₃N₄ to solve this problem a simple and safe in-situ reduction method. g-C₃N₄/CaCO₃ was obtained by a simple and safe one-step calcination method with industrial-grade micron particles CaCO₃. Cyano group modification was in-situ reduced during the thermal polymerization process, which would change the internal electronic structure of g-C₃N₄. The successful combination of g-C₃N₄ and CaCO₃ and the introduction of cyanide have been proved by Fourier transform infrared spectroscopy and X-ray photoelectron spectrometer. The formation of the cyano group, an electron-absorbing group, promotes the effective separation of photogenic electron hole pairs and inhibits the recombination of photogenic carriers. These advantages result in the generation of more •O₂⁻ and ¹O₂ in the catalytic system, which increases the photocatalytic efficiency of nicotine degradation by ten times. Furthermore, the degradation process of nicotine has been studied in this work to provide a basis for the degradation of nicotine organic pollutants in the air.     

催化动力学光度法测定痕量铈

根据前量铈在稀硫酸介质中对重铬酸根氧化ＥＤＴＡ而褪色的反应有催化作用，建立了测定痕量铈的新动力学光度法，测定范围为０￣２．４×１０＾－２μｇ／ｍＬ，检限限为５．２×１０＾－１０ｇ／ｍＬ，用于测定人发中的痕量铈，结果满意。     

催化裂化废水连续萃取脱酚研究

选用焦化粗柴油为萃取剂，在转盘萃取搭连续试验装置中，对催化裂化含酚废水进行脱酚预处理。结果表明，用焦化粗柴油做萃取剂，进水ｐＨ值为８０～９０不加调节；油水比（体积比）１７∶１～２１∶１；转盘转数１１００ｒ／ｍｉｎ，酚萃取脱除率达到８５％以上。萃取后的粗柴油依据现有工艺而进行加氢精制，不需进行再生等后处理。整个萃取工艺简单易行，能满足预处理的要求