流动注射-氢化物发生-原子荧光光谱法测定土壤中铅

采用流动注射-氢化物发生-原子荧光光谱法测定土壤中的铅,工作曲线线性关系良好,检出限为0.25 mg/kg,相对标准偏差＜3.5%,加标回收率为93.0%～105%.该方法简便快速,测定结果准确可靠.     

利用电除尘器降低蓄电池生产中铅尘排放量研究

阐述了利用电除尘器降低蓄电池铅尘排放量的方法和效果     

上海市大气中非甲烷烃与机动车尾气排放研究

采用特征性化合物法和统计法相结合的方法,对上海市大气中非甲烷烃(NMHC)与作为机动车尾气特征性化合物的CO与Pb进行了相关性分析。结果发现,NMHC与Pb在显著性水平0.01下显著性相关,相关系数达到0.593(n=18);NMHC与CO小时均值相关系数达到0.495(n=2329),日均值相关系数达到0.581(n=114)。从而判断机动车尾气排放已经逐渐成为上海市大气中NMHC的主要贡献者。     

显像管玻壳铅尘污染特性的研究

以石家庄市显像管玻壳厂排放的铅尘为研究对象，通过在该玻壳厂周围土壤布点采样，较系统地研究了铅尘在大气和周围土壤中的迁移和转化规律，研究表明，用高斯模式能成功地预测铅尘在大气中的迁移扩散规律，玻壳厂周围土壤表层铅含量较大值出现在当地年主导风向（SSE，N）下风向，铅在土壤中的分布主要集中在0－20cm的耕作层，在20－40cm深度范围内，铅含量呈下降趋势，最大降幅达50％。     

铅芯橡胶支座等效线性分析模型参数的研究

针对目前铅芯橡胶支座等效线性分析模型动力参数选取不够合理的现状 ,笔者通过对铅芯橡胶支座水平动态试验分析 ,系统研究了铅芯橡胶支座等效线性分析模型参数与其几何结构及外加动力荷载特性的关系。研究结果表明 :铅芯橡胶支座等效线性分析模型参数 (水平耗能、等效刚度及等效阻尼比 )主要由其本身的几何构造及组成材料决定 ,且在往复加、卸载循环过程中具有较好的稳定性。笔者对试验数据进行数学统计分析 ,归纳出一些经验公式 ,为其等效线性化动力分析模型参数的合理选取提供了计算方法 ,从而提高其动力分析结果的安全性。     

太原市蔬菜中铅、铬和镉含量分析及安全性评价

笔者采用原子吸收光谱法 ,测定了太原市蔬菜批发市场的 8种蔬菜 72个样品的铅、铬、镉含量。结果表明 :在检测的 8种蔬菜中 ,有 5种蔬菜出现铅含量超标 ,铅是蔬菜中的主要污染元素 ,且污染带有普遍性 ;铬的污染仅出现在芹菜和青菜上 ,其他 6种蔬菜均无超标 ;8种蔬菜均未受到镉的污染 ,合格率为 10 0 %。参照国家食品卫生标准和蔬菜质量分级标准 ,对蔬菜的重金属污染程度进行了安全性评价。在所检测的蔬菜样品中 ,只有青菜受到重金属污染 ,其综合污染指数为 1.12 ,污染程度为轻度污染。其他蔬菜的综合污染指数均低于 0 .7,污染程度均为安全 ,污染水平均为清洁。     

铅锌冶炼厂周边土壤铅源的铅同位素示踪

以某铅锌冶炼厂周边土壤为研究对象,通过对其原料及周边土壤中铅含量的检测,结果显示：该冶炼厂周边土壤铅质量比在22.73mg/kg～126.51mg/kg之间,平均值为42.68mg/kg,是当地土壤铅背景值的1.85倍.采用铅质量比空间分布分析和同位素混合模型计算分析了冶炼厂周边土壤中铅的可能来源,分析表明：土壤铅质量比的空间分布及铅同位素比值与冶炼厂的焦化原料煤相近,焦化原料煤对周边土壤铅污染贡献最大.     

Metal concentrations in used engine oils: Relevance to site assessments of soils

Used engine oils contain metals, which upon entering soils may pose risks to human health or the environment. In this study, previously published concentrations of 23 metals in 213 used engine oil samples from the early 1970s to the mid-1990s are statistically evaluated. Neat (100%) used engine oils were found to contain relatively high concentrations of lead, calcium, and zinc, attributable to piston blow-by of leaded gasoline, calcium salt detergent additives, and zinc-bearing anti-corrosion/anti-oxidation additives, respectively. Wear metal concentrations were lower. The lead concentration in used engine oils in the U.S. declined between the 1970s and early 1990s, potentially providing a basis to constrain the “age” of used engine oil(s) in soils. The concentrations of 23 metals in used engine oils were compared to soil risk benchmarks in 15 representative jurisdictions in the U.S., Canada, Australia, and Europe. The maximum concentrations in neat (100%) used engine oil of eight metals – Be, Co, Fe, Mn, Ni, Se, Ag, and Ti – were lower than their collective minimum benchmarks in soils for the jurisdictions surveyed, indicating their concentrations in soils could not be reasonably expected to exceed any soil benchmarks. Nine metals (As, Ba, Cd, Cr, Cu, Pb, Sn, V and Zn), but particularly arsenic, cadmium, lead, tin, and zinc, were identified as potential contaminants of concern (PCOC) for soils from locations impacted with used engine oils, owing to their higher median concentrations (i.e., 2.5, 1.4, 1038, 5.0, and 922 mg/kg in oil, respectively) relative to most soil benchmarks. Site-specific benchmarks and metal concentrations at reasonable oil in soil concentrations require consideration when developing the suite of PCOC metal analytes for conducting site assessments of soils impacted by used engine oil.     

Pb-Al relationships in waterfowl feces discriminate between sources of Pb exposure

Hunted mallards (n = 56) were collected in the Ebro Delta (Spain) in 2007-08 to evaluate the use of feces as a non-invasive monitoring method to study lead shot ingestion. The prevalence of Pb shot ingestion in these birds was 28.6%, and similar to that reported before a ban on Pb shot use in 2003. Lead concentrations in terminal intestinal contents were higher in mallards with Pb shot in their gizzard. Feces Pb concentrations >34 μg/g d.w were indicative of Pb shot ingestion, and background Pb levels were <12.5 μg/g d.w. To discriminate between birds ingesting soil Pb, and those ingesting Pb shot, we correlated Al and Pb levels and showed that mallards with ingested Pb shot in the gizzard stood out as outliers within the regression. Feces Pb-Al relationships can be used as a simple non-invasive tool in monitoring programs regarding Pb shot ingestion in birds.     

Technologically enhanced 210Pb and 210Po in iron and steel industry

Iron and steel manufacture has been ranked as the largest industrial source of environmental contamination in the USA; the wastes generated in their production processes contain heavy elements that can be a source of contamination, and natural radionuclides that can produce an occupational and/or public radiological impact. In this work the potential occupational effective dose rate (μSv/y) due to inhalation in four integrated steel-making factories from Egypt has been evaluated, by assuming a well defined scenario and with basis in the ²¹⁰Pb and ²¹⁰Po activity concentrations determined in ore and wastes collected in the aforementioned factories. Activity concentrations, in Bq/kg, of ²¹⁰Pb and ²¹⁰Po, and leachable Pb and Fe were measured using gamma-ray spectrometry based on HPGe detector, alpha particle spectrometry based on PIPS detector, and inductively coupled plasma-mass spectrometry (ICP-MS). Levels of ²¹⁰Pb and ²¹⁰Po in the range of <DL-4238 and 1-5660 Bq/kg, respectively, were found. According to the assumed scenarios, the occupational exposures by inhalation are much lower than the recommended annual effective dose limit, although the environmental impact due to waste storage and/or use should be considered based on case by case evaluation.