美国和五大湖双边共同关注区域的白肚燕(双色树燕)雏鸟的有机污染状况

白肚燕，又名双色树燕，栖居于五大湖流域中27个双边共同关注区域(AOCs)，从2010年到2014年对其进行了污染物暴露风险评估，以协助管理者和监管者评估五大湖AOCs的污染状况。本文比较了AOCs和附近非AOCs雏鸟体内污染物浓度的差异。AOCs白肚燕雏鸟尸体中多氯联苯(PCB)和多溴联苯醚的含量分别为30%和33%，低于非AOCs的平均浓度。AOCs白肚燕雏鸟胃含物中多环芳烃(PAH)浓度和血浆中全氟化合物浓度分别为67%和64%，也低于非AOCs的平均浓度。但是与已有生殖效应记载的高PCB污染区相比，有些AOCs雏鸟尸体内的PCBs浓度只是存在小幅升高。一些AOCs食物中PAHs的浓度足够高以致引起可测量的生理响应。在AOCs中，全氟化合物全氟辛烷磺酸在血浆中的最高浓度出现在Raisin河(密歇根州，美国；几何平均数330 ng/mL)，但远低于预估毒性的参考值(1 700 ng/mL)。之前有研究报道雏鸟胃含物中PAH和PCB的浓度以及尸体中PCBs的含量与沉积物中污染物的含量显著相关，从而可加强白肚燕在评估沉积物污染生物有效性方面的应用。
精选自Thomas W. Custer, Christine M. Custer, Paul M. Dummer, Diana Goldberg, J. Christian Franson, Richard A. Erickson. Organic contamination in tree swallow (Tachycineta bicolor) nestlings at United States and binational Great Lakes areas of concern. Environmental Toxicology and Chemistry: Volume 36, Issue 3, pages 735–748, July 2017. DOI: 10.1002/etc.3598
详情请见http://onlinelibrary.wiley.com/wol1/doi/10.1002/etc.3598/full
     

Thirty year monitoring of PCBs, organochlorine pesticides and tetrabromodiphenylether in eel from The Netherlands

Because of their excellent properties as a biomonitor, yellow eels (Anguilla anguilla) have been used for time-trend monitoring of polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and tetrabrominated diphenylether (tetra-BDE). The program has now lasted for thirty years and has delivered valuable information on trends and spatial differences of these compounds in the delta of the rivers Rhine and Meuse and other Dutch canals, rivers and lakes. Specific local PCB, HCH and dieldrin contaminations were identified. Temporal trends show a slow decrease of PCB concentrations since 1977. Eels from the rivers Rhine and Meuse still exceed present European maximum residue limits for dioxin-like PCBs. Apart from some exceptions, OCP and tetra-BDE concentrations have also decreased, and more than those of PCBs. Fat contents of eel have decreased from an average of 21 to ca. 13%. This decrease in fat contents, coincides with the strong reduction of the European eel stock.     

Levels of PCDD/F in adipose tissue on non-occupationally exposed subjects living near a hazardous waste incinerator in Catalonia, Spain

The potential adverse effects on human health of hazardous waste incinerators (HWIs) are a subject of concern. The construction of the first and till now only HWI in Spain finished in 1999. In 2007, after approximately 9 years of regular operations in the facility, the concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/F) were determined by HRGC/HRMS in samples of adipose tissue of 15 autopsied subjects living in the area under potential impact of the HWI (Constantí, Tarragona County, Catalonia). These data were compared with the levels found in two previous surveys performed in 1998 (baseline) and 2002. The current mean PCDD/F concentration in adipose tissue was 14.6 pg WHO-TEQ/g of fat (range: 3.3–55.4 pg WHO-TEQ/g of fat). It means significant changes (a reduction of 64% and an increase of 47%) in the mean PCDD/F levels in comparison to those found in 1998 and 2002: 40.1 and 9.9 pg WHO-TEQ/g of fat, respectively. Women showed higher levels of PCDD/F than men (23.8 vs 11.2 pg WHO-TEQ/g of fat). The increase in the last 5 years would not be directly attributable to exposure to PCDD/F emitted by the HWI, as other biological monitors such as human plasma and milk decreased during the same period.     

Dietary patterns and blood levels of PCDDs, PCDFs, and dioxin-like PCBs in 1656 Japanese individuals

The association between dietary patterns and blood dioxin levels has not been fully investigated. The present study population consisted of 755 men and 901 women (aged 15-73 years) living in 90 different areas of 30 prefectures of Japan. Dietary habits were assessed by inquiring about the consumption frequency of 28 foods, food groups and beverages. In addition, the blood levels of 29 polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzo-furans (PCDFs), and dioxin-like polychlorinated biphenyl (DL-PCBs) congeners were determined by high-resolution gas chromatography/mass spectrometry. The median total toxicity equivalent (TEQ) in the blood, which was calculated on the basis of the toxicity equivalency factors of WHO (2005), was 16 pg TEQ g⁻¹ lipid. Principal component analysis identified five dietary patterns: Healthy diet (high intake of vegetables and fruits); Meat/High fat intake (high intake of meat, meat products, and eggs); Seafood and Alcohol (high intake of fish, shellfish, and alcoholic beverages); Miscellaneous; and Milk products and Alcohol intake (high intake of milk, Milk products, and alcoholic beverages). After adjusting for sex, age, body mass index, and smoking habits, the Seafood and Alcohol pattern scores were significantly related to higher blood levels of total TEQ and PCDDs/PCDFs/DL-PCBs, and the Milk products and Alcohol pattern scores were correlated with higher blood levels of DL-PCBs. More detailed analysis showed that the intake frequencies for alcoholic beverages and seafood were independently and positively associated with total TEQ and the TEQ of PCDFs and DL-PCBs. The association between alcoholic beverage intake and PCDDs was also significant. Analysis of dietary patterns may be useful for identifying the dietary characteristics of individuals with a high dioxin body burden.     

Polychlorinated naphthalenes (PCNs) in riverine and marine sediments of the Laizhou Bay area, North China

PCN congeners were analyzed in marine and riverine sediments of the Laizhou Bay area, North China. Concentrations of PCNs ranged from 0.12 to 5.1 ng g⁻¹ dry weight (dw) with a mean value of 1.1 ng g⁻¹ dw. The levels of PCNs varied largely, with industrial group approximately ten folds higher than those of the rural in riverine sediment. A strong impact by direct discharge from local factories was suggested. Similar compositional profiles were found within groups. High resemblance of compositional profiles between industrial samples and Halowax 1014 was observed. It was indicated that PCNs in riverine sediments were mainly from release of industrial usage, with additional contributions from industrial thermal process at certain sites. In marine sediments, it was suggested that PCNs along the coast of Laizhou Bay were mainly controlled by riverine input. While in the central bay, PCN distributions were possibly impacted by combined multiple factors.     

Modeling urban films using a dynamic multimedia fugacity model

A thin film coats impervious urban surfaces that can act as a source or sink of organic pollutants to the greater environment. We review recent developments in the understanding of film and film-associated pollutant behavior and incorporate them into an unsteady-state version of the fugacity based Multimedia Urban Model (MUM), focusing on detailed considerations of surface film dynamics. The model is used to explore the conditions under which these atmospherically-derived films act as a temporary source of chemicals to the air and/or storm water. Assuming film growth of 2.1 nm d⁻¹ (Wu et al., 2008a), PCB congeners 28 and 180 reach air-film equilibrium within hours and days, respectively. The model results suggest that the film acts as a temporary sink of chemicals from air during dry and cool weather, as a source to air in warmer weather, and as a source to storm water and soil during rain events. Using the downtown area of the City of Toronto Canada, as a case study, the model estimates that nearly 1 g d⁻¹ of ∑₅PCBs are transferred from air to film to storm water.     

Environmental site assessments and audits: Building inspection requirements

Environmental site assessment criteria were originally developed by organizations that focused, almost exclusively, on surface, subsurface, and pollution source contamination. Many of the hazards associated with indoor environments and building structures were traditionally not considered when evaluating sources and entities of environmental pollution. Since a large number of building materials are potentially hazardous, careful evaluation is necessary. Until recently, little information on building inspection requirements of environmental problems has been published. Traditionally, asbestos has been the main component of concern. The ever-changing environmental standards have dramatically expanded the scope of building surveys. Indoor environmental concerns, for example, currently include formaldehyde, lead-based paint, polychlorinated biphenyls, radon, and indoor air pollution. Environmental regulations are being expanded and developed that specifically include building structures. These regulatory standards are being triggered by an increased awareness of health effects from indoor exposure, fires, spills, and other accidents that have resulted in injury, death, and financial loss. This article discusses various aspects of assessments for building structures.     

Photodegradation of tetraphenyltin contained in polychlorinated biphenyl-based transformer oil simulants in alkaline 2-propanol solution

The photodegradation of tetraphenyltin (TePT) contained in polychlorinated biphenyl (PCB)-based transformer oil simulants by ultraviolet (UV) irradiation in alkaline 2-propanol solutions was examined. In the absence of PCBs, the TePT level fell to below 1% of the initial concentration within 30 min. In the absence of both PCBs and an alkali, the concentrations of tri-, di-, and monophenyltins initially increased to a few milligrams per liter, and then reduced to below the detection limits within 90 min. The addition of an alkali to the reaction solution slightly accelerated the photodecomposition of TePT. The decomposition of other phenyltins (PTs) was also accelerated. When PCBs with concentrations of approximately 80 times the initial TePT concentration were added, only a small fraction of the TePT decomposed within 100 min. Moreover, the levels of PTs did not change during irradiation. TePT and other PTs did decompose when the level of PCBs was reduced to the same concentration as that of TePT; however, the decomposition rates were slower than those in the absence of PCBs. In the actual treatment process, TePT and other PTs in PCB-based transformer oil are decomposed by catalytic reduction, which is used after UV irradiation. Therefore, in the actual treatment of PCB-based transformer oil wastes, pollution due to PTs can be prevented.     

Accurate sampling of PCDD/F in high temperature flue-gas using cooled sampling probes

In a laboratory-scale combustion reactor, flue-gas samples were collected at two temperatures in the post-combustion zone, 700 °C and 400 °C, using two different water-cooled sampling probes. The probes were the cooled probe described in the European Standard method EN-1948:1, referred to as the original probe, and a modified probe that contained a salt/ice mixture to assist the cooling, referred to as the sub-zero probe. To determine the efficiency of the cooling probes, internal temperature measurements were recorded at 5 cm intervals inside the probes. Flue-gas samples were analyzed for polychlorinated dibenzo-p-dioxin and dibenzofurans (PCDD/Fs). Samples collected at 700 °C using the original cooling probe showed higher concentrations of PCDD/Fs compared to samples collected using the sub-zero probe. No significant differences were observed between samples collected at 400 °C. The results indicated that artifact formation of PCDD/Fs readily occurs during flue-gas sampling at high temperatures if the cooling within the probe is insufficient, as found for the original probe at 700 °C. It was also shown that this problem could be alleviated by using probes with an enhanced cooling capacity, such as the sub-zero probe.Although this may not affect samples collected for regulatory purposes in exit gases, it is of great importance for research conducted in the high-temperature region of the post-combustion zone.     

Principal component analysis for soil contamination with organochlorine compounds

In order to investigate the distribution pattern of individual organochlorine compounds in soil samples collected from the sites (Canary Island – Spain, China, Germany, India, Romania, Russia, Serbia, Swiss, UK) affected by industrial activities to the more remote areas, principal component analysis was performed on the data taken from literature. Loading plots pointed out the strong correlation among the variables. Score plots revealed similar PCB- and OCP-soil patterns for majority of the investigated sites. Nevertheless, the temporal differences of PCB-soil loads have been identified: the late 1990s and early 2000s concentrations are similar to those of the early 1940s, and they are below the levels existed in 1980. The most pronounced PCB concentrations characterized the soil from 1966. For OCPs the influence of sites location on the detected concentration has been revealed: China and India were characterized by comparably higher loads of DDX (DDT and its metabolites) and of HCH-isomers, respectively.