Synthesis of branched,nano channeled,ultrafine and nano carbon tubes from PET wastes using the arc discharge method

Upcycling polymer wastes into useful, and valuable carbon based materials, is a challenging process. We report a novel catalyst-free and solvent-free technique for the formation of nano channeled ultrafine carbon tubes (NCUFCTs) and multiwalled carbon nanotubes (MWCNTs) from polyethylene terephthalate (PET) wastes, using rotating cathode arc discharge technique. The soot obtain from the anode contains ultrafine and nano-sized solid carbon spheres (SCS) with a mean diameter of 221 nm and 100 nm, respectively, formed at the lower temperature region of the anode where the temperature is approximately 1700 °C. The carbon spheres are converted into long “Y” type branched and non-branched NCUFCTs and MWCNTs at higher temperature regions where the temperature is approximately 2600 °C, with mean diameters of 364 nm and 95 nm, respectively. Soot deposited on the cathode is composed of MWCNTs with a mean diameter of 20 nm and other nanoparticles. The tubular structures present in the anode are longer, bent and often coiled with lesser graphitization compared to the nanotubes in the soot on the cathode.     

供碳源载体及其在低碳氮比污水处理中的应用研究

为解决低C/N污水的脱氮问题,本实验自行研制开发了一种新型碳聚合物载体.对该载体进行低C/N污水的生物膜脱氮研究,考察了HRT、pH、DO、温度等因素对系统同步硝化反硝化脱氮效果的影响.结果表明:在C/N比为4、pH=8、DO=1 mg/L、HRT=6 h,T=24℃的条件下,氨氮及总氮的去除率分别可以达到90%和70...     

PAS-PDMDAAC复合混凝剂研究

以Al2（SO）4和PDMDAAC为原料进行了无机-有机复合絮凝剂的复合实验研制,确定其制备工艺条件,并对油田现场采集的钻井废水作絮凝沉降实验,所研制的PAS-PDMDAAC复合絮凝剂对COD的去除效率可大大提高.     

Recycling and reuse of waste from electricity distribution networks as reinforcement agents in polymeric composites

Of the waste generated from electricity distribution networks, wooden posts treated with chromated copper arsenate (CCA) and ceramic insulators make up the majority of the materials for which no effective recycling scheme has been developed. This study aims to recycle and reuse this waste as reinforcement elements in polymer composites and hybrid composites, promoting an ecologically and economically viable alternative for the disposal of this waste. The CCA wooden posts were cut, crushed and recycled via acid leaching using 0.2 and 0.4 N H₂SO₄ in triplicate at 70 °C and then washed and dried. The ceramic insulators were fragmented in a hydraulic press and separated by particle size using a vibrating sieve. The composites were mixed in a twin-screw extruder and injected into the test specimens, which were subjected to physical, mechanical, thermal and morphological characterization. The results indicate that the acid treatment most effective for removing heavy metals in the wood utilizes 0.4 N H₂SO₄. However, the composites made from wood treated with 0.2 N H₂SO₄ exhibited the highest mechanical properties of the composites, whereas the use of a ceramic insulator produces composites with better thermal stability and impact strength. This study is part of the research and development project of ANEEL (Agência Nacional de Energia Elétrica) and funded by CPFL (Companhia Paulista de Força e Luz).     

Polymer Barrier Films

Many polymers such as polyolefins (polyethylene, polypropylene), poly(vinyl chloride), aliphatic polyamides, poly(ethylene terephthalate), polycarbonate, and others are used as protective barrier films against the mass transport of small molecules of gases, vapors, and liquids (known as diffusates, permeants) in different applications. The barrier properties depend on the polymer characteristics such as solubility, diffusion, permeability, and others, the nature of the fluid, temperature, and other factors. Mainly polymer barrier film application in packaging, construction, and agriculture are discussed.     

Processing and Properties of Mixtures of PHB-V with Post-consumer LDPE

Mixtures of poly-β-(hydroxybutyrate-co-valerate) PHB-V with virgin and post-consumer low density polyethylene (LDPE) were prepared by melt mixing in proportions of 100/0, 90/10, 80/20, 70/30 and 0/100 (wt/wt%). The mixtures were analysed by infrared spectroscopy, differential scanning calorimetry (DSC), dynamic mechanical thermal analysis (DMTA), melting flow index (MFI), tensile tests, scanning electron microscopy (SEM) and biodegradation in simulated soil. The DMTA and DSC curves of post-consumer LDPE suggested that this polymer was a mixture of LDPE and linear low density polyethylene (LLDPE). Virgin and post-consumer LDPE had lower MFI than PHB-V, but the blends showed higher index as the content of LDPE increased. The addition of LDPE reduced the tensile strength and Young’s modulus of the mixtures compared with PHB-V. SEM indicated poor interfacial adhesion between PHB-V and LDPE. PHB-V degraded slow and gradually, while both LDPE showed virtually no degradation under the conditions studied. The biodegradability of the blends depended on their composition and of the type of LDPE. LDPE improved the biodegradability of the mixtures.     

Assessment of plastic packaging waste: Material origin,methods, properties

The global plastics production has increased annually and a substantial part is used for packaging (in Europe 39%). Most plastic packages are discarded after a relatively short service life and the resulting plastic packaging waste is subsequently landfilled, incinerated or recycled. Laws of several European and Asian countries require that plastic packaging waste collected from households has to be sorted, reprocessed, compounded and reused. These recycling schemes typically produce milled goods of poly(ethylene terephthalate) (PET), poly(ethylene) (PE), isotactic poly(propylene) (PP), mixed plastics, and agglomerates from film material. The present study documents the composition and properties of post-consumer polyolefin recyclates originating from both source separation and mechanical recovery from municipal solid refuse waste (MSRW). The overall composition by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) were determined and compared with the sorting results of the sorted fractions prior to the reprocessing into milled goods. This study shows that the collection method for the plastic packaging waste has hardly any influence on the final quality of the recyclate; however, the sorting and reprocessing steps influence the final quality of the recyclate. Although the mechanical properties of recyclate are clearly different than those of virgin polymers, changes to the sorting and reprocessing steps can improve the quality.     

FRP加固钢筋混凝土梁的抗剪计算方法

随着利用FRP加固混凝土结构研究的深入和应用的拓展,FRP加固钢筋混凝土梁抗剪性能的研究已取得了丰硕的成果。以往对抗剪承载力的分析大多是基于有效应变即对极限应变进行有效折减的方法,而最近的研究则引入了裂缝处FRP应变分布不均匀系数。在此基础上,本文综合考虑了FRP发挥的最大应变、沿裂缝应变分布的不均性以及斜裂缝倾角对有效应变的影响,提出了等效有效应变的概念,使计算趋于简单和清晰。本文收集了128根FRP全包裹的、以FRP断裂破坏为主的钢筋混凝土梁的抗剪实验数据,通过对主要影响因素的统计分析,建立了等效有效应变简单可靠的计算公式和基于FRP断裂的抗剪承载力设计方法。128根实验梁的抗剪计算结果表明,本文提出的方法简单可行,意义明确,且精度要比已有的建议公式稍高。     

Polymer hydrogels with enhanced stability and heterogeneous Fenton activity in organic pollutant removal

Polymer hydrogel-based materials have been shown to act as novel Fenton catalysts for water treatment, but the rational design of hydrogel-based catalysts with good stability has been a great challenge. To increase the stability and activity of polymer-based Fenton catalysts, uniform urchin-like α-Fe_2O_3 was grown in situ in a PVA carrier matrix here. PVA molecules promoted the growth of urchin-like α-Fe_2O_3, and then the PVA hydrogel acted as a barrier and carrier to reduce agglomeration. Through coordination by hydroxyl groups,PVA had good combination with Fe ions and α-Fe_2O_3. The formation of Fe–O–C bonds between iron oxides and polymers was reported for the first time, enhancing the material stability during catalysis. Under higher PVA concentrations, the resulting composite hydrogel could generate more ˙OH due to the increase in the number of active sites because of the hairy urchin-like structure. In tetracycline degradation through a heterogeneous Fenton reaction, the resulting material had good catalytic activity from pH 2 to pH 10 with low iron leaching, good reusability and remained at a level of nearly 90%after five consecutive cycles. Density functional theory calculations were used to further prove the mechanism of structural change of the iron oxides. The HOMO and LUMO energies of the iron oxides changed from 5.428 and 4.899 eV to 5.926 and 5.310 eV,indicating that the presence of PVA could influence the charge of the iron atom. The results provide new insights into the preparation of polymer hydrogel-based heterogeneous Fenton catalysts with enhanced stability for water treatment.     

微孔扩散管曝气试验

本文综术字在污水处理站使用离心鼓风机穿孔管大气泡浅 支暴气所引起的溶解氧不足。