Air Pollution and Heat Exposure Study in the Workplace in a Glass Manufacturing Unit in India

Air pollution in the workplace environment due to industrial operation have been found to cause serious occupational health hazard. Similarly, heat stress is still most neglected occupational hazard in the tropical and subtropical countries like India. The hot climate augments the heat exposure close to sources like furnaces. In this study an attempt is made to assess air pollution and heat exposure levels to workers in the workplace environment in glass manufacturing unit located in the State of Gujarat, India. Samples for workplace air quality were collected for SPM, SO₂, NO₂ and CO₂ at eight locations. Results of workplace air quality showed 8-hourly average concentrations of SPM: 165–9118 μg/m³, SO₂: 6–9 μg/m³ and NO₂: 5–42 μg/m³, which were below the threshold limit values of workplace environment. The level of CO₂ in workplace air of the plant was found to be in the range 827–2886 μg/m³, which was below TLV but much higher than the normal concentration for CO₂ in the air (585 mg/m³). Indoor heat exposure was studied near the furnace and at various locations in an industrial complex for glass manufacturing. The heat exposure parameters including the air temperature, the wet bulb temperature, and the globe parameters were measured. The Wet Bulb Globe Temperature (WBGT), an indicator of heat, exceeded ACGIH TLVs limits most of the time at all the locations in workplace areas. The recommended duration of work and rest have also been estimated.     

旋流器在船舶舱底含油污水分离中的应用

分析了船舶舱底含油污水的特性，讨论了船舶油水分离器的现状及使用中存在的问题，提出了使用旋流器对船舶舱底含油污水进行预处理，以改善进入船舶油水分离器的水质及减轻管理人员负担。     

烟气脱硫工艺的选择

论述了现今国内外烟气脱硫的现状及烟气脱硫工艺的分类，国内外较为先进的烟气脱硫工艺的机理及特点，且对不同的脱硫技术的优缺点进行了全面的比较，对需要进行脱硫的装置现状了科学地分析，并最终提出选择合理的脱硫工艺的方法及注意的问题。     

湿式高效除尘脱硫装置的试验研究

本文介绍了一种高效除尘脱硫装置──三相流化床的性能和原理，并对三相流化床除尘脱硫工业中试系统的试验结果进行了分析．试验表明三相流化床除尘效率可达９８％，脱硫效率达７０％，运行安全可靠．     

湿法烟气脱硫添加剂的试验研究

采用我校自主设计研制的水浴脱硫设备,以石灰石为脱硫剂,通过模拟烟气净化冷态模型试验研究了甲酸,乙酸,已二酸,草酸作为有机添加剂对湿法烟气脱硫的影响,并讨论了其机理.试验结果表明,有机酸添加剂能减缓脱硫液pH值的降低过程,能在较低的pH值时得到较高的脱硫率.实验结果为有机添加剂在湿法脱硫中的应用提供了理论依据.     

煤气洗涤废水的处理研究

本研究对特难处理的煤气洗涤废水，采用混凝──电化学氧化处理，可获得良好的处理效果．其ＣＯＤ、油、酚分别由１０３２２ｍｇ／Ｌ、１５０００ｍｇ／Ｌ、１５７０ｍｇ／Ｌ降至２８９ｍｇ／Ｌ、１００ｍｇ／Ｌ、０．５ｍｇ／Ｌ．去除率分别为９７．２％，９３．３％，９９．９７％．     

火电厂烟气脱硫工艺国产化初探

火电厂排放的SO2形成酸雨已严重危害人类生存环境。国家把解决烟气脱硫问题纳入大政方针之中，强制要求火电厂必须安装烟气脱硫装置。文章介绍了几种目前国际上较为成熟的脱硫工艺，并对各种工艺进行了比较，分析了国内烟气脱硫市场，并就脱硫技术国产化问题提出若干看法。     

用锅炉冲渣水为水源的湿式除尘器脱硫

通过对大连重工集团五台文丘里—麻石除尘器脱硫率的测定、各关键点pH值的测定、渣池中各金属含量的测定，说明了以锅炉冲渣水为水源进行湿法除尘，既经济又可达到稳定脱硫的目的。     

连续式磁性颗粒去除器在轧钢废水处理中的应用

连续式磁性颗粒去除器，是利用稀土永磁Ｎｄ－Ｆｅ－Ｂ为材质，处理含磁性颗粒废水的装置，其主要结构由动力传递，磁块组合体，磁条移动，设备本体，进出口流道及分离部件等组成，该文阐述了永磁分离机理，并通过磁性悬浮颗粒的理论驱进速度和最小捕获粒径的求解，探讨了提高砒生粒去除器捕 方法，实践证明，该装置用于冶金轧钢废水处理中，能代替传统的轧钢废水三级处理工艺，节约投资成本７０％，占地减少８５％，运行费用亦大幅     

磁选柱在矿山磁选尾矿和硫铁矿烧渣处理中的应用

介绍了磁选柱的结构、分选原理、分选过程及其在处理矿山磁选尾矿和硫铁矿烧渣方面的应用。用磁选柱精选磁铁矿尾矿，得到的精矿品位大于66％；用磁选柱精选硫铁矿烧渣，得到的精矿品位大于65％。硫的质量分数降至0．84％。