Effect of Cross-Linking Waste Protein with Dialdehydes on Its Biodegradation Under Anaerobic Conditions

Most native polymers used in processing and application technologies are admittedly disposable from the environment in a biologic manner, but products possess low mechanical strength. One of the paths to increasing this attribute (if feasible) is their cross-linking, which may, however, affect their readiness to biodegradation. In the presented work this condition was observed on the example of waste protein (Hykol B) cross-linking by means of glutardialdehyde and glyoxal. Degree and course of cross-linking were determined through impedance spectroscopy. The objective of this work also was to obtain data for constructing a sensor capable of following the cross-linking course in real time, for potential industrial application of Hykol in continuous production. Impedance spectroscopy proved to be applicable even to this kind of material marked by considerable water content and exhibiting relatively high electric conductivity; so far it had been used only for materials of low conductivity. An aqueous environment inoculated with digested anaerobic sludge from a municipal wastewater treatment plant was selected for modeling anaerobic conditions. The relation was studied between cross-linking degree given by content of cross-linking agent (determined by impedance spectroscopy) and biodegradation degree under anaerobic conditions. It was confirmed that network density as given by quantity of added agent not only reduced breakdown degree but also slowed the course of the process. This fact is particularly obvious with cross-linking by means of glyoxal; network density is thus dependent on type of employed substance, which affect type and structure of created network. That not merely forms an obstacle during polymer swelling and dissolution but also prevents access of bacteria to source of metabolized organic carbon.     

旧路改造工程路堤稳定性安全监测方案设计

本文从旧路改造工程的特点出发,通过室内实验获取土力学参数并对沉降量进行预测计算.利用沉降仪、测斜管、孔隙水压力计、土压力盒等多种测试仪器,选取有代表性的观测断面,对经过土工格栅加筋处理的软土地基进行了高路堤施工期间的沉降与稳定观测,并提出适合工程特点的控制标准.从而达到控制路堤稳定、检验填筑质量、控制差异沉降、为路面施工提供技术支持的目的.     

基于机器学习分类算法解析EIS数据的有机涂层性能评价方法

目的 基于机器学习分类算法快速评估有机涂层的防腐性能。方法 通过实验室加速试验模拟涂层真实的退化过程,并根据测得的电化学数据,分析不同退化阶段的等效电路元件参数。随后,采用随机抽样方法获取大量数据,用于机器学习模型训练。通过对比支持向量机(SVM)、k最近邻(k-NN)和随机森林(RF)3种不同的机器学习算法,以及多种输入特征集训练的涂层性能分类器模型的准确率,分析最适合用于涂层性能快速评估的机器学习算法和电化学特征。结果 根据不同输入特征训练的k-NN和RF模型均表现出良好的预测效果,而SVM模型的预测效果相对较差。根据不同频率范围训练的分类器模型中,在低频区表现最佳,而在高频区表现较差。结论 基于阻抗虚部、虚部+实部和阻抗模值3种输入特征训练的RF分类器模型的预测效果最准确。不同频率区间内,低频区的阻抗特征更能准确表征涂层性能。     

Quantifying the squeezing or stretching of fisheries as they adapt to displacement by marine reserves

The designation of no‐take marine reserves involves social and economic concerns due to the resulting displacement of fishing effort, when fishing rights are removed from those who traditionally fished within an area. Displacement can influence the functioning of the fishery and success of the reserve, yet levels of displacement are seldom quantified after reserve implementation and very rarely before that. We devised a simple analytical framework based on set theory to facilitate reserve placement. Implementation of the framework requires maps of fishing grounds, fishing effort, or catch per unit effort for at least 2 years. The framework quantifies the level of conflict that a reserve designation might cause in the fishing sector due to displacement and the opportunities to offset the conflict through fisher spatial mobility (i.e., ability of fishers to fish elsewhere). We also considered how the outputs of the framework can be used to identify targeted management interventions for each fishery. We applied the method in Honduras, where the largest marine protected area in Central America is being placed, for which spatial data on fishing effort were available for 6 fisheries over 3 years. The proposed closure had a greater negative impact on the shrimp and lobster scuba fisheries, which concentrated respectively 28% and 18% of their effort inside the reserve. These fisheries could not accommodate the displacement within existing fishing grounds. Both would be forced to stretch into new fishing grounds, which are available but are of unknown quality. These stakeholders will likely require compensation to offset costly exploratory fishing or to travel to fishing grounds farther away from port.     

基于ANFIS模型的基坑工程位移反分析

在软土地基深基坑开挖支护工程的设计与施工中,岩土体力学参数的取值问题是关键。基于MATLAB(R2007a)模糊工具箱中的自适应神经模糊推理系统(ANFIS)对基坑岩土体力学参数进行了位移反演分析,并结合汉口火车站出站厅基坑工程实例,动态反演了具体参数,检验了反演精度,从而验证了该方法用于基坑工程位移反分析的可行性及工程适用性。     

多热源分散程度的数学模拟及对置换通风影响

通过建立多污染热源置换通风的三维数学模型,根据数值解分析三热源位置变化对多污染源置换通风效果的影响,结果表明:热源的位置变化对多污染热源置换通风效果的影响是很大的,房间内热源应紧凑布置以利于提高通风效果和节能。     

Investigation of titanium liquid/gas diffusion layers in proton exchange membrane electrolyzer cells

In a proton exchange membrane electrolyzer cell (PEMEC), liquid/gas diffusion layer (LGDL) is expected to transport electrons, heat, and reactants/products to and from the catalyst layer with minimum voltage, current, thermal, interfacial, and fluidic losses. In addition, carbon materials, which are typically used in PEM fuel cells (PEMFCs), are unsuitable in PEMECs due to the high ohmic potential and highly oxidative environment of the oxygen electrode. In this study, a set of titanium gas diffusion layers with different thicknesses and porosities are designed and examined coupled with the development of a robust titanium bipolar plate. It has been found that the performance of electrolyzer improves along with a decrease in thickness or porosity of the anode LGDL of titanium woven meshes. The ohmic resistance of anode LGDL and contact resistance between anode LGDL and the anode catalyst play dominant roles in electrolyzer performance, and better performance can be obtained by reducing ohmic resistance. Thin titanium LGDLs with straight-through pores and optimal pore morphologies are recommended for the future developments of low-cost LGDLs with minimum ohmic/transport losses.     

西安f7地裂缝发展变化的预测研究

论文首先分析和总结了影响西安地裂缝发展变化的主要人为因素。随后,利用三维非稳定渗流分析方法研究了人类活动对地下水位的影响;根据西安市新增固定资产投资的变化,预测了地面荷载的变化;以时间、地下水位和地面荷载为基本变量,建立了预测f 7地裂缝活动趋势的BP神经网络模型;最后,借助MATLAB语言进行编程,利用训练稳定的网络模型,预测了f 7地裂缝的活动趋势以及年平均的垂直位移沉降量,为进一步研究西安地铁2号线安全运行和防护提供参考依据。     

不同场地条件下水下隧道周围土体位移变化的数值分析

以拟建的哈尔滨松花江隧道为背景,考虑土体—衬砌的材料非线性特性和相互作用,按平面应变假定,建立在不同场地条件下的若干接近实际的有限元计算模型,应用有限元计算软件ANSYS进行数值分析,得出不同场地条件下隧道周围土体位移的分布规律,遴选出了影响水下隧道周围土体变形的部分关键因素,为合理确定隧道覆土层安全厚度提供了一定的理论依据。     

Dip-angle influence on areal DNAPL recovery by co-solvent flooding with and without pre-flooding

A two-dimensional (2D) laboratory model was used to study effects of gravity on areal recovery of a representative dense non-aqueous phase liquid (DNAPL) contaminant by an alcohol pre-flood and co-solvent flood in dipping aquifers. Recent studies have demonstrated that injection of alcohol and co-solvent solutions can be used to reduce in-situ the density of DNAPL globules and displace the contaminant from the source zone. However, contact with aqueous alcohol reduces interfacial tension and causes DNAPL swelling, thus facilitating risk of uncontrolled downward DNAPL migration. The 2D laboratory model was operated with constant background gradient flow and a DNAPL spill was simulated using tetrachloroethene (PCE). The spill was dispersed to a trapped, immobile PCE saturation by a water flood. Areal PCE recovery was studied using a double-triangle well pattern to simulate a remediation scheme consisting of an alcohol pre-flood using aqueous isobutanol ( approximately 10% vol.) followed by a co-solvent flood using a solution of ethylene glycol (65%) and 1-propanol (35%). Experiments were conducted with the 2D model oriented in the horizontal plane and compared to experiments at the 15 degrees and 30 degrees dip-angle orientations. Injection was applied either in the downward or upward direction of flow. Experimental results were compared to theoretical predictions for flood front stability and used to evaluate effects of gravity on areal PCE recovery. Sensitivity experiments were performed to evaluate effects of the alcohol pre-flood on PCE areal recovery. For experiments conducted with the alcohol pre-flood and the 2D model oriented in the horizontal plane, results indicate that 89-93% of source zone PCE was recovered. With injection oriented downward, results indicate that areal PCE recovery was 70-77% for a 15 degrees dip angle and 57-59% for a 30 degrees dip angle. With injection oriented upward, results indicate that areal PCE recovery was 57-60% at the 30 degrees dip angle, which was similar to PCE recovery for injection in the downward flow direction. Lower areal PCE recovery at greater dip angles in either direction of flow was attributed to DNAPL swelling and migration, flood front instabilities and bypassing of the displaced fluid past the extraction wells during the alcohol pre-flood. Additional results demonstrate that the use of an alcohol pre-flood can be beneficial in improving DNAPL recovery in the horizontal orientation, but pre-flooding may reduce areal recovery efficiency in dip-angle orientations. This study also demonstrates the use of theoretical perturbation (fingering) analysis in predicting NAPL recovery efficiency for flooding processes in remediating aquifers with dip angles.