TiO2薄膜光催化效果的强化

采用溶胶-凝胶法制备TiO2溶胶,将其涂覆在普通钠钙玻璃上,以TiO2对甲基橙的光分解率探讨TiO2薄膜最佳光催化性能.结果表明,当PEG400的加入量为7%时,TiO2薄膜的光催化性能最强;用锐钛型TiO2粉末二次引发的溶胶提拉制成的薄膜对甲基橙的光催化分解效果有很大的提高;经滴加操作后薄膜的光催化性能有明显改善;各个影响因素最好的组合效果为滴加操作 锐钛型粉体引发 H2SO4超强酸化 La3 掺杂.     

聚乙二醇和海藻酸钠混合固定化硝化细菌研究

采用聚乙二醇(PEG)和海藻酸钠(SA)作为混合固定化载体材料对硝化细菌进行包埋固定化.结果表明,PEG和SA质量分数分别为6％和4％时,其溶液黏稠度、成球效果及机械强度、传质性能等方面都均为最佳.另外,固定化小球扫描电镜显示球体为外密内疏的结构,这满足体内细胞泄漏少、外面细胞难以进入的条件.将所得最佳性能的固定化小球与游离菌体进行模拟废水降解对比试验,经过7d处理后废水中氨氮和亚硝态氮质量浓度都明显下降,且固定化颗粒的降解率要明显高于游离菌株,此时氨氮的去除率为90％,亚硝态氮去除率为80％.     

恶臭假单胞菌Pseudomonas putida 5-x细胞壁膜系统的Cu2+吸附性能

对1株从电镀废水中分离出的革兰氏阴性菌恶臭假单胞菌P.putida 5-x的细胞表面组分对Cu²⁺的吸附性能进行了分析研究.结果表明,分离的P.putida 5-x细胞壁膜的Cu²⁺吸附容量是完整细胞的5倍之多.细胞表面组分如肽聚糖层、细胞外膜和细胞内膜在P.putida 5-x细胞壁膜的Cu²⁺吸附过程中都发挥了作用.肽聚糖层、细胞外膜和内膜在P.putida 5-x细胞壁膜中的含量依次为细胞内膜>外膜>肽聚糖层,而它们的Cu²⁺吸附容量的大小依次为肽聚糖层>外膜>内膜.在P.putida 5-x细胞壁膜对Cu²⁺的吸附过程中,肽聚糖层贡献了不到15%的吸附容量,而细胞外膜和内膜分别贡献了30%～35%和25%～30%.P.putida 5-x细胞外膜中的磷脂含量明显比其它报道的革兰氏阴性细菌的细胞外膜高,这可能是P.putida 5-x细胞外膜具有较高Cu²⁺吸附容量的主要原因,并由此导致P.putida 5-x细胞壁膜的高Cu2+吸附容量.     

Halopriming imparts tolerance to salt and PEG induced drought stress in sugarcane

Sugarcane, a glycophyte grown in the tropical and subtropical regions, is frequently subjected to soil salinity, affecting the yield and quality of the harvest. The ameliorative efficiency of salt priming on emergence and plantlet growth was examined in sugarcane cultivars which are known to vary in salt tolerance under field conditions. Salt priming with NaCl (100 mM) improved both the percent and rate of germination of the sets of the tolerant (Co 62175) and moderately tolerant (CoM 265) varieties compared to sensitive (CoC 671) and test variety (Co 86032). Salt priming during germination also improved the growth performance of two-month-old sugarcane plants in terms of shoot length, shoot and root fresh weight when subjected to 15 day iso-osmotic (−0.7 MPa) NaCl (150 mM) or polyethylene glycol (PEG 8000; 20%, w/v) stress. The primed plants exhibited lower salt- and dehydration-induced leaf senescence. The results suggest salt priming as an efficient approach for imparting abiotic stress tolerance in sugarcane.     

壳聚糖聚乙二醇活性炭共混超滤膜制备及性能研究

研究了壳聚糖制备超滤膜,以及致孔剂聚乙二醇(PEG400)、活性炭含量对膜的水通量和截流率的影响。发现PEG的加入大大提高了壳聚糖超滤膜的纯水透过率和对牛白蛋白溶液的截流率。加入活性炭也同样可以提高膜的纯水通量和截流率。结果表明,选择投加5μL(每100mL铸膜液添加5μLPEG)的水溶性PEG400为致孔剂所制得的膜的水通量和截留率最理想。将此膜应用到洗浴废水上,COD去除率达到75%。     

Identification of surfactants emerged in aerobic granulation

In this study, aerobic granules were cultivated in sequencing batch reactors with activated sludge as the seed. The reactors were operated for 12 h per cycle with the organic loading rate (OLR) increasing in double stepwise from 0.5 to 4.0 g COD L⁻¹ d⁻¹. Within the 40 d running, black granules with regular and smooth morphology were cultivated, which had high wet density and high settling velocity. During the granulation process, foams emerged and disappeared in the reactor, coinciding with the proliferation of filamentous microorganisms in the granules, implying that surfactants might exist and play an important role in the granulation. Using ultra performance liquid chromatography-tandem mass spectrometry, the surfactants were identified as homologous compounds of polyethylene glycol (PEG) with molecular weights ranging mainly from 100 to 500 Da. Their general formulas were proposed as HO-[CH₂-CH₂-O]_n-H. The source of PEG still needs further investigation.     

Bio-efficacy evaluation of nanoformulations of β-cyfluthrin against Callosobruchus maculatus (Coleoptera: Bruchidae)

In the present investigation, bioefficacy of developed β-cyfluthrin formulations, utilizing laboratory synthesized poly(ethylene glycols) based amphiphilic copolymers, were evaluated against Callosobruchus maculatus (Coleoptera: Bruchidae). The bioefficacy data indicated that the formulations developed by utilizing polymers having PEG – 1500 (3c) and PEG – 2000 (3d) as the hydrophilic segment showed greater efficacy after 14 days as evident from EC₅₀ values (2.2 and 1.58 mg L^?1 respectively). Also, release from the commercial SC formulation was faster than developed formulations as the commercial formulation had the lowest EC₅₀ value on the first day (0.51 mg L^?1). The mean EC₅₀ of the commercial formulation against C. maculatus was quite high as compared to those of developed formulations. The results suggest that depending upon the polymer matrix used, the application rate of β-cyfluthrin can be optimized to achieve insect control at the desired level and period. The results described in this paper are promising and provide a comparison of developed formulations with the commercial one showing an earlier degradation of β-cyfluthrin in the latter and relatively prolonged activity in the former.     

Removal of textile dyes from aqueous solution using PEG based aqueous biphasic system

Aqueous biphasic systems (ABSs) composed of polyethylene glycol (PEG) and salt have been examined for the removal of textile dyes from textile effluent. The partitioning of four dyes namely Cibacron Scarlet LS 2G, Rhodamine B, Brown ERN and Astacryl Red 3B was investigated. All the dyes studied were found to partition into the upper PEG rich layer. Sodium carbonate was found to be the most efficient salt for extraction of dyes. Sodium sulphate was found to be marginally less efficient. Sodium chloride did not cause partitioning at all. Partitioning occurred at all pH and was almost pH independent. The partitioning of these dyes in larger volume (100?mL) ABS was also demonstrated. Studies using dye bath effluent were also conducted. In all cases very high efficiencies consistently above 98% were obtained.     

新型交联壳聚糖材料对地下水重金属Zn~(2+)的吸附性能

地下水重金属污染的原位修复技术研究日益受到关注.利用课题组研发的聚乙二醇(PEG400)作为交联剂合成的新型交联壳聚糖材料,用该新型材料吸附地下水中重金属Zn~(2+),探讨CTS:PEG比例和Zn~(2+)印迹量对吸附效果的影响,通过该材料对Zn~(2+)的吸附动力学、吸附等温线以及吸附热力学关系,讨论其吸附的内在机理.研究发现CTS:PEG=1:2和印迹的Zn~(2+)量是0.5%的交联壳聚糖,去除重金属Zn~(2+)的效率最高;其非平衡吸附遵循准二级动力学模型,吸附速率为0.1260mg·g~(-1)·h~(-1);在20℃,溶液pH值为7条件下,PEG-CTS对Zn~(2+)的最大吸附容量是18.20 mg·g~(-1),平均吸附能量是9.66kJ·mol~(-1);化学吸附为主,也包含物理吸附.     

添加剂PEG对共混超滤膜结构和性能的影响

以不同分子量聚乙二醇 (PEG)作为PSf/A共混超滤膜的添加剂 ,测定所制备膜的水通量、截留率 .结果表明 ,膜的水通量随PEG分子量的变化呈现非线性关系 .当PEG分子量为4000时 ,水通量达到最大值115.2mL·(cm²·h)^-1,是不加PEG时的6倍 .通过超滤实验结果以及膜结构的电镜照片的观察 ,研究了PSf/A共混超滤膜体系中PEG作用的规律 .PEG分子量的增加改变了PSf/A铸膜液体系的相平衡关系 ,使铸膜液成为热力学不稳定体系 ,加速了相分离的发生 ;另外 ,PEG分子量的增加提高了铸膜液的粘度 ,引起相分离的延迟,这2种作用影响了膜的最终结构和性能.