Evaluation of the aggressive potential of marine chloride and sulfate salts on mortars applied as renders in the Metropolitan Region of Salvador--Bahia, Brazil

In recent years, growing interest has focused on determining the performance of materials and evaluating the service life of structures exposed to various environmental forces. In this context, the determination of the aggressive potential of marine salts on mortars used as external renders is critical. The present study aimed to evaluate the spatial distribution of marine salts relative to distance from the sea. This was done by monitoring the deposition rate of chlorides and sulfates in wet candle sensors, located at nine stations scattered around the Metropolitan Region of Salvador, state of Bahia, Brazil. The study also determined the effectiveness of water-soluble salts at penetrating three different types of mortars of varying cement content via deposition and diffusion. The methodology employed enabled an evaluation of the efficiency of the monitoring sensors' measurement of the aggressiveness potential of local marine aerosol, and determination of the comparative performance of the three mortars tested, from the standpoint of resistance to salt penetration. The type and amount of salts captured both in solution and in powder samples extracted from the mortars were determined by ion chromatography. The analysis of the various types of mortars tested indicated which types are more resistant to the aggressive potential of the region's marine aerosol and the distance from the shore where local buildings are liable to be most strongly affected.     

Transport of silver nanoparticles (AgNPs) in soil

The effect of soil properties on the transport of silver nanoparticles (AgNPs) was studied in a set of laboratory column experiments, using different combinations of size fractions of a Mediterranean sandy clay soil. The AgNPs with average size of ∼30 nm yielded a stable suspension in water with zeta potential of −39 mV. Early breakthrough of AgNPs in soil was observed in column transport experiments. AgNPs were found to have high mobility in soil with outlet relative concentrations ranging from 30% to 70%, depending on experimental conditions. AgNP mobility through the column decreased when the fraction of smaller soil aggregates was larger. The early breakthrough pattern was not observed for AgNPs in pure quartz columns nor for bromide tracer in soil columns, suggesting that early breakthrough is related to the nature of AgNP transport in natural soils. Micro-CT and image analysis used to investigate structural features of the soil, suggest that soil aggregate size strongly affects AgNP transport in natural soil. The retention of AgNPs in the soil column was reduced when humic acid was added to the leaching solution, while a lower flow rate (Darcy velocity of 0.17 cm/min versus 0.66 cm/min) resulted in higher retention of AgNPs in the soil. When soil residual chloride was exchanged by nitrate prior to column experiments, significantly improved mobility of AgNPs was observed in the soil column. These findings point to the importance of AgNP-soil chemical interactions as a retention mechanism, and demonstrate the need to employ natural soils rather than glass beads or quartz in representative experimental investigations.     

An improved product-process for cleaner chrome tanning in leather processing

Severe restrictions imposed by the pollution control authorities on the disposal of chromium, total dissolved solids and chlorides in tannery effluents have forced the tanners to look for low-waste, high exhaust chrome tanning salts. An improved chrome syntan with more than 90% uptake of chrome has been developed. The new product serves both as tanning and retanning agent and can be applied directly to delimed pelts thus eliminating the conventional pickling stage in the leather processing. This modified process helps to reduce the chemical oxygen demand (COD), total dissolved solids (TDS) and chlorides in the spent tan liquor by 51, 81 and 99%, respectively. The product offers full, soft leathers having shrinkage temperature comparable to conventional chrome tanned skins. Since the developed product is highly reactive, it saves time and reduces the water requirement when compared to the conventional chrome tanning method. Thus the novel product/process developed not only has advantages in reducing pollution loads but also seems to be techno-economically viable.     

The use of poplar during a two-year induced phytoextraction of metals from contaminated agricultural soils

The efficiency of poplar (Populus nigra L.xPopulus maximowiczii Henry.) was assessed during a two-year chemically enhanced phytoextraction of metals from contaminated soils. The tested metal mobilizing agents were EDTA (ethylenediaminetetraacetic acid) and NH4Cl. EDTA was more efficient than chlorides in solubilizing metals (especially Pb) from the soil matrix. The application of chlorides only increased the solubility of Cd and Zn. However, the increased uptake of metals after the application of higher concentrations of mobilizing agents was associated with low biomass yields of the poplar plants and the extraction efficiencies after the two vegetation periods were thus comparable to the untreated plants. Additionally, the application of mobilizing agents led to phytotoxicity effects and increased mobility of metals. Higher phytoextraction efficiencies were observed for Cd and Zn compared to Pb and Cu. Poplars are therefore not suitable for chemically enhanced phytoextraction of metals from severely contaminated agricultural soils.     

某碱渣堆放场对岩溶地下水的影响分析

结合某碱渣堆放场的水文地质状况,通过模拟试验,探讨了碱渣堆放场对岩溶地下水的影响。结果表明,碱渣场在冲灰水和大气降水的浸泡、淋滤作用下,其中的氯化物和钙镁盐类大量析出并随碱渣废液一起下渗,石灰岩碎石对氯化物有一定的吸附作用,但能力微弱。据试验数据分析认为,该渣场是焦作市北中部岩溶地下水中氯化物浓度和总硬度持续升高的主要原因。     

氯代苯类有机物生物降解性能的研究

采用连续、完全混合活性污泥法,对重点污染物中六种氯代苯类有机物(氯苯、1,2-二氯苯、1,3-二氯苯、1,4-二氯苯、1,2,4-三氯苯、六氯苯)的生物降解性能进行了研究。试验表明,除六氯苯外,其它五种氯代苯均能被驯化后的微生物所降解。随着苯环上氯取代基的增加,氯代苯的生物降解速率降低。在2B天的连续试验中,六氯苯基本上不能被微生物所降解。