TiO2薄膜光催化效果的强化

采用溶胶-凝胶法制备TiO2溶胶,将其涂覆在普通钠钙玻璃上,以TiO2对甲基橙的光分解率探讨TiO2薄膜最佳光催化性能.结果表明,当PEG400的加入量为7%时,TiO2薄膜的光催化性能最强;用锐钛型TiO2粉末二次引发的溶胶提拉制成的薄膜对甲基橙的光催化分解效果有很大的提高;经滴加操作后薄膜的光催化性能有明显改善;各个影响因素最好的组合效果为滴加操作 锐钛型粉体引发 H2SO4超强酸化 La3 掺杂.     

Distribution and persistence of carbaryl in some terrestrial and aquatic components of a forest environment

Abstract

An oil‐based formulation of carbaryl (1‐naphthyl N‐methyl‐carbamate) (Sevin‐2‐Oil) was applied twice by a fixed‐wing aircraft at a dosage rate of 280 g of A.I./ha/application to a coniferous forest near Allardville, New Brunswick. The highest concentrations of the chemical in fir foliage, litter and forest soil 1 h after application were respectively 4.20, 1.21 and 0.59 ppm (fresh weight). The residues dissipated rapidly and the DT50 values obtained from the depletion curves were 2.3 d for foliage and 1.5 d for litter and soil samples. Very low levels (<0.1 ppm) of carbaryl persisted in foliage and litter beyond the 10 d sampling period. The maximum residue level found in stream water was 0.314 ppm and more than 50% of it had dissipated within 1 h. Low but detectable levels (0.001 ppm) of the chemical persisted in water until the end of the 10 d sampling period. Sediment samples contained a maximum level of 0.04 ppm, which dissipated below the detection limit within 5 h. Brook trout and slimy sculpins captured in the stream 1 d after the spray contained on average about 0.04 ppm of carbaryl and none of it was found in 3 d postspray samples.     

Rain‐washing of foliar deposits of Dimilin®WP‐25 formulated in four different carrier liquids

Abstract

Dimilin^® WP‐25, a wettable powder formulation of diflubenzuron (DFB) [1‐(4‐chlorophenyl)‐3‐(2,6‐difluorobenzoyl) urea], was formulated in four different carrier liquids, viz., water; a light petroleum paraffinic oil, ID 585; a heavy paraffinic oil, Sunspray^® 7N; and a 1:2 mixture of a light petroleum aromatic solvent (Cyclosol^® 63) and canola oil; to provide four end‐use mixtures, Dim‐W, Dim‐585, Dim‐7N and Dim‐Cy‐C respectively, each containing 28 g of DFB per litre. Balsam fir branch tips clipped from greenhouse‐grown seedlings, and sugar maple branch tips clipped from field‐grown young trees, were exposed to uniform‐sized droplets (ranging in diameters from 135 to 190 μm) of the four end‐use mixtures which were atomized using a monodispersed droplet generator. Droplets were collected on the fir and maple branch tips and the initial residue per g fresh weight of foliage was determined by high‐performance liquid chromatography (HPLC). The branch tips were exposed to cumulative rainfall of 3, 6 and 10 mm at an intensity of 5 mm/h and at time intervals of 1, 12, 36 and 72 h after DFB treatment, to test the influence of ‘ageing’ of foliar residues on rainfastness. Foliar samples were collected for residue determination just before the onset of rainfall, and at 0.5 h post‐rain. DFB was quantified by the HPLC method. In the case of fir foliage, the Dim‐W formulation was the most susceptible to rain‐washing and the rainfastness did not increase with the ageing period of foliar deposits. In contrast, the three oil‐based mixtures showed greater rainfastness depending upon the carrier liquid and the ageing period. Rainfastness decreased in the order of Dim‐Cy‐C > Dim‐7N > Dim‐585 > Dim‐W. In contrast, the data on maple foliage indicated that the ageing of deposits increased the rainfastness of all the 4 end‐use mixtures. Dim‐585 was the most susceptible to rain washing, and rainfastness decreased in the order of Dim‐W > Dim‐Cy‐C > Dim‐7N > Dim‐585.     

A composite medium approximation for unsaturated flow in layered sediments

Saturated-unsaturated flow in strictly layered sediments proceeds via conductors in parallel in the direction parallel to bedding, and via resistors in series in the direction perpendicular to bedding. On sufficiently small scales of space and time, flow in such media will be subject to approximate capillary equilibrium locally, which provides a basis for approximating the effective hydraulic conductivity of a composite multi-layer medium in terms of the conductivities of the individual layers. Equations for the hydraulic conductivity tensor in "composite medium approximation" (COMA) are given in a coordinate system aligned with bedding. Hydraulic conductivity parallel to bedding is generally larger than in the perpendicular direction. The anisotropy depends on the spread of the conductivity distribution, and tends to increase for dryer conditions. The COMA model was implemented in a multi-phase flow simulator and tested by comparison with high-resolution simulations in which all layering heterogeneity is resolved explicitly. Under favorable conditions, COMA is found to accurately represent sub-grid scale flow and transport processes, providing a practical method for simulating field-scale flow and transport in layered media. The approximation improves when layers are thinner, and when flow rates are smaller.     

上喷式矿井排风热回收装置内液滴运动模型及其优化计算

为了减小常见下喷式装置风吹水损失大的问题,设计了上喷式矿井排风热回收装置.通过液滴受力及运动分析,将上喷式液滴的运动划分为2个阶段.根据牛顿第二定律,建立了简化的液滴动量方程;在该方程的基础上,结合运动阶段划分,得到临界条件下的力平衡关系式;利用该式,在10个不同相对速度下,得到了上喷式与下喷式的保证液滴不被吹飞的临界直径.应用变量替换,将液滴动量方程变换为液滴运动距离的微分式;继而,根据液滴及空气之间的雷诺数组合,导出了液滴最大上升高度的5个积分计算式.应用这些积分式,数值计算了不同迎面风速、液滴粒径及液滴初速度下,上喷式中液滴最大上升高度、下喷式中液滴最大下降高度.对比计算结果,相比下喷式,上喷式具有节水、液滴选择范围宽和低耗高效的优势.     

考虑油滴碰撞聚结的斜板除油过程模拟

考虑离散油滴在油田废水除油过程中发生的油滴碰撞聚结现象,模拟得出斜板除油器内全部油滴的动态信息,用于斜板除油器除油效率的计算.对矩形同向流斜板除油过程的模拟研究表明:油滴的碰撞聚结会增加斜板除油的效率;当废水的原始含油浓度增大时,斜板除油的效率会增大,碰撞聚结对除油效率提高的影响也越大;废水流动速度提高及斜板的倾斜角度增加均会使斜板的除油效率降低,但此时油滴碰撞聚结对除油效率的影响仍很明显.     

冷拉螺旋叶片展开的精确算法

提出了一种新的、更趋精确合理的关于冷拉螺旋叶片坯料的展开与放样计算方法 ,并从实践中探索出叶片在展开与放样时其内径的精确修正系数k之值。     

Investigation of pool spreading and vaporization behavior in medium-scale LNG tests

A failure of a Liquefied Natural Gas (LNG) tanker can occur due to collision or rupture in loading/unloading lines resulting in spillage of LNG on water. Upon release, a spreading liquid can form a pool with rapid vaporization leading to the formation of a flammable vapor cloud. Safety analysis for the protection of public and property involves the determination of consequences of such accidental releases. To address this complex pool spreading and vaporization phenomenon of LNG, an investigation is performed based on the experimental tests that were conducted by the Mary Kay O'Connor Process Safety Center (MKOPSC) in 2007. The 2007 tests are a part of medium-scale experiments carried out at the Brayton Fire Training Field (BFTF), College Station. The dataset represents a semi-continuous spill on water, where LNG is released on a confined area of water for a specified duration of time. The pool spreading and vaporization behavior are validated using empirical models, which involved determination of pool spreading parameters and vaporization rates with respect to time. Knowledge of the pool diameter, pool height and spreading rate are found to be important in calculating the vaporization rates of the liquid pool. The paper also presents a method to determine the vaporization mass flux of LNG using water temperature data that is recorded in the experiment. The vaporization rates are observed to be high initially and tend to decrease once the pool stopped spreading. The results of the analysis indicated that a vaporization mass flux that is varying with time is required for accurate determination of the vaporization rate. Based on the data analysis, sources of uncertainties in the experimental data were identified to arise from ice formation and vapor blocking.     

煤矿喷雾降尘雾滴存活时间的数值模拟

为提高煤矿喷雾除尘效率,揭示雾滴蒸发和存活时间的影响因素,基于差分方法,使用MATLAB软件编制雾滴蒸发过程仿真试验程序,研究了雾滴初始半径、雾滴与风流的初始相对速度、雾滴初始温度,以及巷道风流初始温度、湿度、风压共6个关键影响因素与存活时间的关系;采用逐步回归方法构造了包含5因素的雾滴存活时间计算方程。结果表明:在目前煤矿采用的雾化降尘工艺范围内,除雾滴初始温度外的其他5个因素对雾滴存活时间的影响均较为显著;构建的雾滴存活时间综合计算方程能合理计算雾滴的存活时间。     

水喷淋作用下建筑通道烟气蔓延特性模拟研究

采用数值模拟研究在单喷淋作用下建筑通道内烟气的蔓延特性,并对不同喷淋压力条件下烟气质量流量、温度及CO体积分数随时间的变化进行对比,对引起喷淋作用下烟气蔓延速度及烟气成分浓度变化的主要原因进行了分析。结果表明,增加喷淋压力对烟气的降温作用增强,降低了烟气在通道内的蔓延速度;同时,喷淋引起的烟气拥塞增加了流出喷淋覆盖区的烟气的CO体积分数,使得烟气毒性加大。