Differences in the growth response of three bryophyte species to nitrogen

The effect of nitrogen on biomass production, shoot elongation and relative density of the mosses Pleurozium schreberi, Hylocomium splendens and Dicranum polysetum was studied in a chamber experiment. Monocultures were exposed to 10 N levels ranging from 0.02 to 7.35 g N m⁻² during a 90-day period. All the growth responses were unimodal, but the species showed differences in the shape parameters of the curves. Hylocomium and Pleurozium achieved optimum biomass production at a lower N level than Dicranum. Pleurozium had the highest biomass production per tissue N concentration. Tolerance to N was the widest in Dicranum, whereas Hylocomium had the narrowest tolerance. Dicranum retained N less efficiently from precipitation than the other two species, which explained its deviating response. All species translocated some N from parent to new shoots. The results emphasize that the individual responses of bryophytes to N should be known when species are used as bioindicators.     

氧化塘合理的设计与操作

氧化塘不但可以低费用的降解废水，而且可以提供有用的生物量，其关键是进行合理的设计、操作和去除污泥．本文综合国外的文献资料，提出合理的设计和操作方案，并且引用国外试验者开发的预测模型；同时提出操作过程加入适当的ＣａＣｌ２化学添加剂可以促进藻类生物量的絮凝，以保证出水的质量和提供可利用的生物量．     

A framework to assess regional environmental impacts of dedicated energy crop production

Numerous studies have evaluated air quality and greenhouse gas mitigation benefits of biomass energy systems, but the potential environmental impacts associated with large-scale changes in land-use patterns needed to produce energy crops have not been quantified. This paper presents a framework to assess the potential soil, water, and biodiversity impacts that may result from the large-scale production of dedicated energy crops. The framework incorporates producer economic decision models with environmental models to assess changes in land use patterns and to quantify the consequent environmental impacts. Economic and policy issues that will affect decisions to produce energy crops are discussed. The framework is used to evaluate erosion and chemical runoff in two Tennessee regions. The analysis shows that production of dedicated energy crops in place of conventional crops will significantly reduce erosion and chemical runoff.     

Combined Municipal Solid Waste and biomass system optimization for district energy applications

Municipal Solid Waste (MSW) disposal has been a controversial issue in many countries over the past years, due to disagreement among the various stakeholders on the waste management policies and technologies to be adopted. One of the ways of treating/disposing MSW is energy recovery, as waste is considered to contain a considerable amount of bio-waste and therefore can lead to renewable energy production. The overall efficiency can be very high in the cases of co-generation or tri-generation. In this paper a model is presented, aiming to support decision makers in issues relating to Municipal Solid Waste energy recovery. The idea of using more fuel sources, including MSW and agricultural residue biomass that may exist in a rural area, is explored. The model aims at optimizing the system specifications, such as the capacity of the base-load Waste-to-Energy facility, the capacity of the peak-load biomass boiler and the location of the facility. Furthermore, it defines the quantity of each potential fuel source that should be used annually, in order to maximize the financial yield of the investment. The results of an energy tri-generation case study application at a rural area of Greece, using mixed MSW and biomass, indicate positive financial yield of investment. In addition, a sensitivity analysis is performed on the effect of the most important parameters of the model on the optimum solution, pinpointing the parameters of interest rate, investment cost and heating oil price, as those requiring the attention of the decision makers. Finally, the sensitivity analysis is enhanced by a stochastic analysis to determine the effect of the volatility of parameters on the robustness of the model and the solution obtained.     

Study of lignocellulosic biomass ignition properties estimation from thermogravimetric analysis

In the last decade, the use of renewable resources has increased significantly in order to reduce the energetic dependence on fossil fuels, as they have an important contribution to the global warning and greenhouse gasses effect. Because of that, research on biofuels has been increased in the last years as its characteristics of use match those of the conventional fuel's: solid biomass can be used instead of coals, and biodiesel could replace diesel. Research on solid biomass ignition properties has been considerably developed because of the amount of industrial accidents related to the treatment and use of solid biomass (self-ignition, dust explosions, etc.). On the other hand, thermogravimetric analysis (TGA) is becoming and important characterization technique as it can be used to determine a wide spectrum of properties, such as kinetics, composition, proximate analysis, etc. This research aims to combine thermal analysis and ignition properties, by using the TGA to obtain the elemental composition of lignocellulosic biomass and compare those results to Minimum Ignition Energy (MIE) values test output, so a relation between composition and MIE can be found.To achieve this aim, biomass samples from different origins have been used: oil palm wastes (empty fruit bunches, mesocarp fiber and palm kernel shell), agricultural wastes (straw chops) and forestry wastes (wood chips and wood powder). Also, raw materials and torrefied biomass were compared. The hemicellulose/cellulose ratio was calculated and compared to different flammability properties, finding out that the greater the ratio and the lower the onset temperature (temperature at which the pyrolysis reaction accelerates), the lower was the minimum ignition energy. From this basis it was possible to define “tendency areas” that grouped the samples whose MIE values were similar. Three tendency areas were found: high minimum ignition energy, medium minimum ignition energy, and low ignition energy.     

Producing biogas from agricultural residues generated during phytoremediation process: Possibility,threshold, and challenges

In the past decades, a novel strategy has arisen, as required by time, to get a rational production of biogas from contaminated biomass, which may be, on purpose, harvested from contaminated soil phytoremediation process. The present review focuses on the possibility and potential of utilizing the agricultural residues generated during phytoremediation for production of biogas. As a general result of the studies compiled in this review, the harvested biomass can subsequently be utilized for the winning of biogas, and it provides a solution of waste disposal for phytoremediation technology. According to the analysis of previous results, not more than 1 mg/L of cadmium in fermenters shows promoting or at least no inhibitory effect on cumulative biogas yields. This strategy is promising for dealing with both environmental and energy problems in spite of many challenges in the coming future.     

Source apportionment of PAHs and n-alkanes bound to PM1 collected near the Venice highway

n-Alkanes and polycyclic aromatic hydrocarbons (PAHs) bound to atmospheric particulate matter (PM₁) were investigated in a traffic site located in an urban area of Venice Province (Eastern Po Valley, Italy) during the cold season. Considering the critical situation affecting the Veneto Region concerning the atmospheric pollution and the general lack of information on PM₁ composition and emission in this area, this experimental study aims at determining the source profile, their relative contributions and the dispersion of finer particles. Four sources were identified and quantified using the Positive Matrix Factorization receptor model: (1) mixed combustions related to the residential activities, (2) agricultural biomass burning in addition to the resuspension of anthropogenic and natural debris carried by the wind, (3) gasoline and (4) diesel traffic-related combustions. The role of local atmospheric circulation was also investigated to identify the pollutant sources.     

Chemical composition and properties of ashes from combustion plants using Miscanthus as fuel

Miscanthus giganteus is one of the energy crops considered to show potential for a substantial contribution to sustainable energy production. In the literature there is little data available about the chemical composition of ashes from the combustion of Miscanthus and practically no data about their physical properties. However, for handling, treatment and utilization of the ashes this information is important. In this study ashes from two biomass combustion plants using Miscanthus as fuel were investigated. The density of the ashes was 2230 ± 35 kg/m~3, which was similar to the density of ashes from straw combustion. Also the bulk densities were close to those reported for straw ashes. The flowability of the ashes was a little worse than the flowability of ashes from wood combustion. The measured heavy metal concentrations were below the usual limits for utilization of the ashes as soil conditioner. The concentrations in the bottom ash were similar to those reported for ash from forest residue combustion plants. In comparison with cyclone fly ashes from forest residue combustion the measured heavy metal concentrations in the cyclone fly ash were considerably lower. Cl-, S and Zn were enriched in the cyclone fly ash which is also known for ashes from wood combustion. In comparison with literature data obtained from Miscanthus plant material the concentrations of K, Cl-and S were lower.This can be attributed to the fact that the finest fly ash is not collected by the cyclone de-dusting system of the Miscanthus combustion plants.     

Influence of agricultural activities, forest fires and agro-industries on air quality in Thailand

Annual and monthly-based emission inventories in northern, central and north-eastern provinces in Thailand, where agriculture and related agro-industries are very intensive, were estimated to evaluate the contribution of agricultural activity, including crop residue burning, forest fires and related agro-industries on air quality monitored in corresponding provinces. The monthly-based emission inventories of air pollutants, or, particulate matter (PM), NOx and SO₂, for various agricultural crops were estimated based on information on the level of production of typical crops: rice, corn, sugarcane, cassava, soybeans and potatoes using emission factors and other parameters related to country-specific values taking into account crop type and the local residue burning period. The estimated monthly emission inventory was compared with air monitoring data obtained at monitoring stations operated by the Pollution Control Department, Thailand (PCD) for validating the estimated emission inventory. The agro-industry that has the greatest impact on the regions being evaluated, is the sugar processing industry, which uses sugarcane as a raw material and its residue as fuel for the boiler. The backward trajectory analysis of the air mass arriving at the PCD station was calculated to confirm this influence. For the provinces being evaluated which are located in the upper northern, lower northern and northeast in Thailand, agricultural activities and forest fires were shown to be closely correlated to the ambient PM concentration while their contribution to the production of gaseous pollutants is much less.     

渗透胁迫下两种生物质能源植物的抗渗透胁迫能力及稳定碳同位素组成

本研究以麻疯树(Jatropha curcas L.)和油桐(Vernicia fordii H.)幼苗为材料,考察了麻疯树和油桐幼苗的生理指标和稳定碳同位素组成对渗透胁迫的响应情况。结果表明,麻疯树比油桐更具有抗渗透胁迫能力,主要体现在:随着渗透胁迫程度的加剧,麻疯树叶片相对含水量与叶绿素含量的下降幅度均小于油桐,脯氨酸含量和可溶性糖含量的增加幅度高于油桐,相对电导率的上升幅度小于油桐;随着渗透胁迫程度的加剧,两种植物幼苗叶片的δ13 C值也都显著升高,但是在同一渗透胁迫水平下,麻疯树幼苗叶片的δ13 C值较油桐高,表明其拥有较高的水分利用效率,能够在干旱胁迫下更好地生长,暗示着植物叶片的δ13 C值在一定情况下可以表征植物的抗旱性。