Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

水解酸化—SBR法处理乳品废水的工程应用

介绍了应用SBR法处理乳品废水的工程实例。利用SBR工艺处理乳品废水的特点是工艺简单、占地面积小、运转费用低、管理方便、出水稳定。当进水CODCr2 0 0 0～ 2 5 0 0mg/L之间 ,出水可以达到国家《污水综合排放标准》(GB8978- 1996 )中的一级标准 ,CODCr≤ 10 0mg/L。     

烟气脱硫(FGD)工程设计框架

在国家实施“总量控制”和“两控区”的重要环境保护政策下,烟气脱硫（ＦＧＤ）工程提到了可持续发展的议事日程,实施ＦＧＤ工程是投资大、直接经济效益不显著的环境工程。因此在全面论述实施ＦＧＤ工程的设计框架,即各设计阶段应考虑的几个重大因素和必须遵循的一系列规则基础上,着重对目前国内外主要的ＦＧＤ工艺进行了技术经济分析评述,提出选择ＦＧＤ工艺的８条重要原则。供重大决策参考和推动环境目标的实现。     

重庆市主城区空气污染成因分析及改善大气扩散条件的措施建议

盆地地形导致的城区内小以厚度大，强逆温层出现频率高等大气不利扩散条件是造成重庆市主城区空气污染的重要原因，建议城市布局要符合空气动力学原理并通过工程措施改善城区大气扩散条件。     

环境影响评价的系统方法

环境影响评价需要将评价对象作为一个系统来考虑,因此在评价过程中必然要用到系统方法,论述了环境系统工程、系统动力学和环境信息系统三大系统方法在环境影响评价中的应用.     

People's Perception About Participatory Developmental Programs: Lessons from the Mountain Risk Engineering Program in the Indian Central Himalaya

The Indian Himalayan Region (IHR) is suffering from environmental degradation due to population pressure and infra-structural needs. This is coupled with a natural setting, which creates problems of accelerated soil erosion and mass wasting. In view of these environmental difficulties and the growing concern for effective restoration, there has become an urgent need for multi-disciplinary coordinated improvement schemes. The mitigation of risk arising from hazardous mass wasting processes, through a careful and systematic approach, has helped in the development of the concept of Mountain Risk Engineering (MRE). The MRE practices involve an integrated approach to solving the infra-structural engineering problems of hilly and mountainous areas through environmentally conscious cost-effective and site-specific designs. However, the role of people's participation is extremely crucial for the success of such programs. This paper analyzes the perception of the local people about the approaches adopted in MRE participatory developmental programs and throws light on the intricacies of peoples' participation.     

Modeling Postfire Response and Recovery using the Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS)1

Abstract: This paper investigates application of the Army Corps of Engineers’ Hydrologic Engineering Center Hydrologic Modeling System (HEC‐HMS) to a burned watershed in San Bernardino County, California. We evaluate the HEC‐HMS’ ability to simulate discharge in prefire and postfire conditions in a semi arid watershed and the necessary parameterizations for modeling hydrologic response during the immediate, and subsequent recovery, period after a wildfire. The model is applied to City Creek watershed, which was 90% burned during the Old Fire of October 2003. An optimal spatial resolution for the HEC‐HMS model was chosen based on an initial sensitivity analysis of subbasin configurations and related model performance. Five prefire storms were calibrated for the selected model resolution, defining a set of parameters that reasonably simulate prefire conditions. Six postfire storms, two from each of the following rainy (winter) seasons were then selected to simulate postfire response and evaluate relative changes in parameter values and model behavior. There were clear trends in the postfire parameters [initial abstractions (I_a), curve number (CN), and lag time] that reveal significant (and expected) changes in watershed behavior. CN returns to prefire (baseline) values by the end of Year 2, while I_a approaches baseline by the end of the third rainy season. However, lag time remains significantly lower than prefire values throughout the three‐year study period. Our results indicate that recovery of soil conditions and related runoff response is not entirely evidenced by the end of the study period (three rainy seasons postfire). Understanding the evolution of the land surface and related hydrologic properties during the highly dynamic postfire period, and accounting for these changes in model parameterizations, will allow for more accurate and reliable discharge simulations in both the immediate, and subsequent, rainy seasons following fire.     

Municipal solid waste management: Identification and analysis of engineering indexes representing demand and costs generated in virtuous Italian communities

The definition and utilisation of engineering indexes in the field of Municipal Solid Waste Management (MSWM) is an issue of interest for technicians and scientists, which is widely discussed in literature. Specifically, the availability of consolidated engineering indexes is useful when new waste collection services are designed, along with when their performance is evaluated after a warm-up period. However, most published works in the field of MSWM complete their study with an analysis of isolated case studies. Conversely, decision makers require tools for information collection and exchange in order to trace the trends of these engineering indexes in large experiments. In this paper, common engineering indexes are presented and their values analysed in virtuous Italian communities, with the aim of contributing to the creation of a useful database whose data could be used during experiments, by indicating examples of MSWM demand profiles and the costs required to manage them.     

六个行业熔铅作业防毒工程技术措施综合评价(第一部分)

在对印刷、铁路车辆、电缆压铅、铅蓄电池、铅盐、铅冶炼这六个行业的熔铅作业以及对铅蓄电池和铅盐生产的铅尘作业中防毒工程技术措施调研的基础上,介绍了它们的基本情况。参照收集的国内外资料,采用定性及定量化的方法,对它们的防毒工程技术措施分别从工艺设备、排风罩类型、净化装置等得出优化选择结论,对还存在的问题进行讨论并提出建议。     

PARTIAL AREA HYDROLOGY AND ITS APPLICATION TO WATER RESOURCES1

ABSTRACT: According to a concept known as partial area hydrology, watershed areas are separated into hydrologically active and passive subareas. The literature relating to the development of the partial area concept is reviewed briefly and the relationship of partial area hydrology to geology, soils, and micrometeorology is illustrated. The potential application of partial area hydrology is discussed with respect to present hydrologic techniques, future hydrologic models, urban hydrology, water quality, and water management. Suggestions for identifying and delineating the contributing areas are discussed.