VEGETATION INFLUENCE ON SMALL STREAM SILTATION1

ABSTRACT: A meandering stream channel was simulated in the Hydraulics Laboratory at Colorado State University and a series of tests was conducted using four types of vegetation to evaluate the potential effects of vegetation on sediment deposition and retention in a stream channel. The data collected included average flow velocity, flow depth, length of vegetation, density of vegetation, cross-sectional area of the vegetative stem, wetted perimeter of the vegetative stem, and injection and flushing time. The findings indicated that the vegetation could retain from 30 to 70 percent of the deposited sediments. The ability of vegetation to entrap and retain sediment is related to the length and cross-sectional area of the vegetation. The variables describing the flow and the vegetative properties were combined to form a predictive parameter, the sedimentation factor (S_d) that can be compared with the amount of sediment entrapped by vegetation in a stream system. A relation was developed correlating vegetation length to sediment retention after flushing for flexibility and rigid vegetation.     

城区地表径流面源污染和河道水环境治理的研究

河流为人类提供了多样的生态服务功能,然而城市化对河流生态系统健康状况造成严重的影响。随着点源污染的有效管理控制,非点源污染降雨径流己成为造成城市地表水环境污染的主要原因。为了改善河道水质,引调清水激活城市内河水体,提高河道的水环境自净能力,有效改善城市水环境。文章以南京河西水系为例,利用Saint-Venant方程组对水系建立一维水动力模型,并通过汇流结点水位法对方程组进行数值求解;对WASP5水质模型进行二次开发用于水质模拟;建立水质模型和一维河网水动力模型的耦合模型,将水动力模型计算所得到的水动力参数耦合到WSAP5水质模型中,模拟降雨过程以及引调清水过程的河网各河段的水质变量浓度,得出降雨径流对河流的污染程度以及引清冲污措施对河流水质改善的效果并优化调水过程。     

污染土壤淋洗修复技术研究进展

本文介绍了淋洗修复技术和淋洗装置在污染土壤修复技术中的应用,对有机物、重金属及放射性核素污染土壤淋洗修复技术的应用现状进行了总结和评价,还探讨了淋洗修复技术的发展方向及其应用前景。     

ASSESSING FLUSHING-FLOW REQUIREMENTS FOR BROWN TROUT SPAWNING GRAVELS IN STEEP STREAMS1

Flushing flows are re1eses from dams designed to remove fine sediment from downstream spawning habitat. We evaluated flushing flows on reaches proposed for hydroelectric diversions on seven streams in the eastern Sierra Nevada, California, with wild populations of brown trout (Salmo trutta). The stream reaches are steep (average map slopes range from 7 to 17 percent), are dominated by boulder cascades, and afford few opportunities for gravel deposition. Methods for estimating flushing flows from flow records, developed from studies in other localities, produced widely differing results when applied to the study streams, probably reflecting differences in the hydrologic and geomorphic characteristics of the streams on which the methods were developed. Tracer gravel experiments demonstrated that all sampled gravels were washed out by the flows of 1986, a wet year. Size analyses of gravel samples and hydraulic data from field surveys were used in tractive-force calculations in an attempt to specify the flow required to flush the gravels. However, these calculations produced some unrealistic results because the flows were nonuniform in the study reaches. This suggests that the tractive-force approach may not be generally applicable to small, steep streams where nonuniform flow conditions prevail.     

陶瓷膜污染过程分析与膜清洗方法优化

采用膜孔径为50 nm的陶瓷膜错流过滤方式,对碱性高浓度有机洗涤废水进行9个周期的膜通量衰减及反向脉冲清洗再生实验研究.通过设计膜污染阻力构成实验,测算膜污染总阻力及其构成比例.实验结果表明,膜固有阻力比例较低,浓差极化污染较弱,Rt和Rc+Rirt污染阻力稳定性较高,膜堵塞形式兼有孔内堵塞和滤饼过滤；选择质量分数0.1％的稀盐酸和0.2％的草酸溶液膜清洗效果均较好,清洗时间为3 min,脉冲时间和频率为3 s/5 s.     

Removal of arsenic in tailings by soil flushing and the remediation process monitoring

In order to investigate the optimum conditions for the application of soil flushing of arsenic, a batch test was carried out using EDTA at various concentration and pH levels. Based on the optimum condition derived from the batch test, a column test was conducted to examine the feasibility of the soil-flushing technology under field-equivalent conditions. In this column test, a low flushing solution flow rate showed a significantly higher As removal efficiency (71.6%) than a high flow rate (56.3%). TCLP (toxicity characteristic leaching procedure) and a seed germination test were carried out to monitor the toxicity both during and after the treatment. The finally treated tailings were shown to be significantly remediated, having a reduced toxicity by both the TCLP and seed germination tests.     

A Biosurfactant-Enhanced Soil Flushing for the Removal of Phenanthrene and Diesel in Sand

In order to examine the potential of biosurfactants in soil remediation, and to investigate the effects of several operating conditions, such as flow rate, biosurfactant concentration and surfactant type, biosurfactant-enhanced soil flushing was conducted. In the biosurfactant-enhanced soil flushing process, the removal efficiency increased as the flow rate decreased. Rhamnolipid showed no effect on the removal efficiency of phenanthrene and diesel from sand in the concentration range 0.3-0.5%. However, rhamnolipid showed higher efficiencies for the removal of phenanthrene and diesel from sand than Tween 80. Based on total recovery, following an equivalent pore volume flush, it was more difficult to remove diesel than phenanthrene. In order to obtain the specific removal efficiency, more pore volumes of surfactant solution may be required in field applications. Under optimum conditions, the biosurfactant removed as much as 70% of the phenanthrene and 60% of the diesel in the sand. These results indicate that the use of biosurfactants in the flushing process is favorable, not only with respect to the environment, but also on removal efficiencies.     

Controlled release, blind test of DNAPL remediation by ethanol flushing

A dense nonaqueous phase liquid (DNAPL) source zone was established within a sheet-pile isolated cell through a controlled release of perchloroethylene (PCE) to evaluate DNAPL remediation by in-situ cosolvent flushing. Ethanol was used as the cosolvent, and the main remedial mechanism was enhanced dissolution based on the phase behavior of the water-ethanol-PCE system. Based on the knowledge of the actual PCE volume introduced into the cell, it was estimated that 83 L of PCE were present at the start of the test. Over a 40-day period, 64% of the PCE was removed by flushing the cell with an alcohol solution of approximately 70% ethanol and 30% water. High removal efficiencies at the end of the test indicated that more PCE could have been removed had it been possible to continue the demonstration. The ethanol solution extracted from the cell was recycled during the test using activated carbon and air stripping treatment. Both of these treatment processes were successful in removing PCE for recycling purposes, with minimal impact on the ethanol content in the treated fluids. Results from pre- and post-flushing partitioning tracer tests overestimated the treatment performance. However, both of these tracer tests missed significant amounts of the PCE present, likely due to inaccessibility of the PCE. The tracer results suggest that some PCE was inaccessible to the ethanol solution which led to the inefficient PCE removal rates observed. The flux-averaged aqueous PCE concentrations measured in the post-flushing tracer test were reduced by a factor of 3 to 4 in the extraction wells that showed the highest PCE removal compared to those concentrations in the pre-flushing tracer test.     

非离子表面活性剂淋洗萘污染土壤的修复研究

采用土柱实验研究了非离子表面活性剂对焦化厂萘污染砂土的淋洗效果,同时研究了超声预处理对非离子表面活性剂土壤淋洗的增强效果及粉土和粘土对非离子表面活性剂土壤淋洗的不利影响.研究表明,1)1g·L-1的TritonX-100、AEO-9和Tween80对同一萘浓度(192.4mg·kg-1)的土壤洗脱效率分别为73.0%、81.5%和59.0%,2g·L-1的表面活性剂的洗脱效率要高于1g·L-1的洗脱率,分别为96.5%、95.1%和88.2%.2)对土壤进行短时超声处理(80Hz)促进了洗脱率的提高,超声10min的淋洗效果要高于超声5min的淋洗效果;土壤分别经5min和10min超声处理后,2g·L-1浓度的TritonX-100对萘的洗脱率从94%分别提高到98.8%和99.6%,洗脱时间从255min分别减少到172min和160min.3)砂土中含有粉土和粘土对洗脱效果有不利影响,且粘土的影响要更严重,当萘污染的砂土混入5%的粘土时,2g·L-1浓度的TritonX-100对萘的洗脱率从94.7%下降至73.8%,洗脱时间从255min增加至605min,而混入20%的粉土洗脱率仅下降到88.4%,洗脱时间增加至512min.     

考虑串孔影响的穿层水力扩孔合理冲煤量研究

在煤层增透方面,穿层水力扩孔冲出煤量主要依据经验以及遵循“能冲尽冲”的原则,致使串孔现象严重,针对这一问题,采用理论分析、数值模拟结合工程试验的方法,阐明了串孔致因机理和串孔前后扩孔孔硐内负压损失分布特征,构建了考虑吸附膨胀应力和Klinkenberg效应的扩孔孔硐附近煤体瓦斯流动流-固耦合数学模型,利用Comsol软件,模拟了不同冲煤量下扩孔孔硐附近煤体所受应力分布和煤体渗透率的变化情况。研究结果表明:随着煤体不断被冲出,孔硐有效抽采半径相对变化率呈现衰减趋势;扩孔孔硐附近最大主应力呈现先急剧减小再增大,然后降低直至原始应力大小的趋势;渗透率的变化趋势与最大主应力恰好相反;扩孔孔硐周围煤体渗透率的增加主要受煤体的径向位移所控制,孔硐周围煤体大幅径向位移会产生串孔现象,渗透率虽得到大幅度提高,但瓦斯抽采效果和安全采掘很难保证,需要厘定出水力扩孔合理冲出煤量。