UAMR中温处理高浓度啤酒废水研究

研究了上流厌氧复合反应器（ＵＡＭＲ）中温处理高浓度啤酒废水的工况，并对反应器运行性能的影响因素进行了分析。试验结果表明，在３５℃时，当进水有机容积负荷为８～１２ｋｇＣＯＤ／ｍ＾３·ｄ，水力停留时间ＨＲＴ〉０．４ｄ时，ＣＯＤ去除率可达到８０％以上，沼气ＣＨ４含量为７０．３％，反应器平均生物积累产率为０．０５０４ｋｇｖｓｓ／ｋｇＣＯＤ。     

Novel synthetic approaches and TWC catalytic performance of flower-like Pt/CeO2

A novel Ultrasonic Assisted Membrane Reduction （UAMR）-hydrothermal method was used to prepare flower-like Pt/CeO2 catalysts. The texture, physical/chemical properties, and reducibility of the flower-like Pt/CeO2 catalysts were characterized by X-Ray Diffraction （XRD）, Scanning Electron Microscope （SEM）, Transmission Electron Microscope （TEM）, N2 adsorption, and hydrogen temperature programmed reduction （HE-TPR） techniques. The catalytic performance of the catalysts for treating automobile emission was studied relative to samples prepared by the conventional wetness impregnation method. The Pt/CeO2 catalysts fabricated by this novel method showed high specific surface area and metal dispersion, excellent three-way catalytic activity, and good thermal stability. The strong interaction between the Pt nanoparticles and CeO2 improved the thermal stability. The Ce4＋ ions were incorporated into the surfactant chains and the Pt nanoparticles were stabilized through an exchange reaction of the surface hydroxyl groups. The SEM results demonstrated that the Pt/CeO2 catalysts had a typical three-dimensional （3D） hierarchical porous struc- ture, which was favorable for surface reaction and enhanced the exposure degree of the Pt nanoparticles. In brief, the flower-like Pt/CeO2 catalysts prepared by UAMR-hydrothermal method exhibited a higher Pt metal dispersion, smaller particle size, better three-way catalytic activity, and improved thermal stability versus conven- tional materials.     

Effects of synthesis methods on the performance of Pt + Rh/Ce0.6Zr0.4O2 three-way catalysts

The 0.7 wt% Pt + 0.3 wt% Rh/Ce0.6Zr0.4O2 catalysts were fabricated via different methods, including ultrasonic-assisted membrane reduction(UAMR) co-precipitation, UAMR separation precipitation, co-impregnation, and sequential impregnation. The catalysts were physico-chemically characterized by N2 adsorption, XRD, TEM, and H2-TPR techniques, and evaluated for three-way catalytic activities with simulated automobile exhaust. UAMR co-precipitation- and UAMR separation precipitationprepared catalysts exhibited a high surface area and metal dispersion, wide λ window and excellent conversion for NOx reduction under lean conditions. Both fresh and aged catalysts from UAMRprecipitation showed the high surface areas of ca. 60–67 m2/g and 18–22 m2/g, respectively, high metal dispersion of 41%–55%, and small active particle diameters of 2.1–2.7 nm. When these catalysts were aged, the catalysts prepared by the UAMR method exhibited a wider working window(Δλ = 0.284–0.287) than impregnated ones(Δλ = 0.065–0.115) as well as excellent three-way catalytic performance, and showed lower T50(169.C) and T90(195.C) for NO reduction than the aged catalysts from impregnation processes, which were at 265 and 309.C, respectively. This implied that the UAMR-separation precipitation has important potential for industrial applications to improve catalytic performance and thermal stability. The fresh and aged 0.7 wt% Pt + 0.3 wt% Rh/Ce0:6Zr0:4O2 catalysts prepared by the UAMR-separation precipitation method exhibited better catalytic performance than the corresponding catalysts prepared by conventional impregnation routes.