Acceleration of floc-water separation and floc reduction with magnetic nanoparticles during demulsification of complex waste cutting emulsions

Waste cutting emulsions are difficult to treat efficiently owing to their complex composition and stable emulsified structure. As an important treatment method for emulsions, chemical demulsification is faced with challenges such as low flocs–water separation rates and high sludge production. Hence, in this study, Fe₃O₄ magnetic nanoparticles (MNPs) were used to enhance chemical demulsification performance for treating waste cutting emulsions under a magnetic field. The addition of MNPs significantly decreased the time required to attain sludge–water separation and sludge compression equilibrium, from 210 to 20 min. In addition, the volume percentage of sludge produced at the equilibrium state was reduced from 45% to 10%. This excellent flocculation–separation performance was stable over a pH range of 3–11. The magnetization of the flocculants and oil droplets to form a flocculant–MNP–oil droplet composite, and the magnetic transfer of the composite were two key processes that enhanced the separation of cutting emulsions. Specifically, the interactions among MNPs, flocculants, and oil droplets were important in the magnetization process, which was controlled by the structures and properties of the three components. Under the magnetic field, the magnetized flocculant–MNP–oil droplet composites were considerably accelerated and separated from water, and the sludge was simultaneously compressed. Thus, this study expands the applicability of magnetic separation techniques in the treatment of complex waste cutting emulsions.     

膨润土吸附－絮凝法处理污水中的重金属离子

研究了天然膨润土对Ｐｂ￣（２＋）、Ｃｄ￣（２＋）、Ｃｒ￣（３＋）的吸附和膨润土的絮凝沉降条件，将吸附与絮凝过程结合起来形成处理污水的新工艺，加入０．０４％膨润土和０．００６％的ＰＡＣ可使低浓度污水中Ｐｂ￣（２＋）脱除９３．１％。     

絮凝法处理纸浆漂白废水的研究

研究了无机絮凝剂ＰＡＣ，ＰＳＡ，ＰＥＳ，ＭｇＣｌ２，ＣａＯ及其与有机高分子絮凝剂ＣＧＡ复全使用对两种不同工艺漂白废水的混凝处理特性，结果表明，水质１ＣＯＤｃｒ，ＡＯＸ去除率分别为６３．２％，４５．３％，水质２ＣＯＤｃｒ，ＡＯＸ去除率达７３．１￥％，５３．４％。化钙与碳酸钠具有相同的降解ＡＯＸ能力，硫离子在中性ｐＨ条件下可显著提高ＡＯＸ的去除率。     

处理含油废水絮凝剂最佳配方的筛选

针对含油废水，选择合适种类的絮凝剂，通过评价絮凝剂的除油效果，筛选出适合处理石油化工行业含油废水的絮凝剂最佳配方．其主要特点是投加量少、除油效果好、价格适宜。     

特稠油污水处理技术研究

采用自己研究的药剂对辽河油田稠油污水进行破乳和净水试验，找出了主要影响因素，确定了处理工艺的操作条件。结果表明，使用破乳剂DI，可使油的回收率大于99％；絮凝剂A中添加了收缩絮体的化学药剂和B之后作为净水剂，使积杂量小于5％（体积比）。同时，处理后的水完全达到辽河油田要求的指标，即油含量小于5mg/L，积杂量小于15mg/L。     

浅谈混凝沉淀在炼油污水中的应用

随着国家对环保的重视，为确保处理效果，混凝沉淀技术在一些炼油污水中得到应用，并取得了较好的效果。     

电活性铝凝剂EAF对炼油废水的絮凝作用

采用电化学方法制取电活性铝凝剂ＥＡＦ．对照测定了３种传统的含铝絮凝剂和ＥＡＦ对模拟和实际含油废水的絮凝净化作用．结果表明，６０℃温度下，ｐＨ＝６～７，ＥＡＦ的用量为１０～３０ｍｇ／Ｌ时，油与ＣＯＤｃｒ去除率分别在９０％和８０％以上．简单讨论了ＥＡＦ的絮凝作用机理．     

壳聚糖絮凝机理及絮凝性能的影响因素分析

壳聚糖是一种天然高分子聚合物,被广泛地作为絮凝剂用于水处理过程。探讨了壳聚糖的三种絮凝机理。在水处理中,其絮凝性能的发挥受到pH值、壳聚糖的投加量、壳聚糖的分子量以及壳聚糖的脱乙酰度等因素的影响。     

钻井废水的处理

本文针对钻井废水的处理，综述了现有的处理方法、处理药剂以及处理装置，并对钻井废水的处理、排放提出了一些意见和建议。     

絮凝法处理含水溶性膦配体TPPTS废水

以Al-Fe混凝荆、聚丙烯酰胺（PAM）、十六烷基三甲基溴化铵（CTAB）为助凝剂，考察了水溶性膦配体间磺酸钠基三苯基膦（TPPTS）废水中化学耗氧量（COD）的去除率，以此来间接考察TPPTS的去除效果。结果表明，助凝剂的添加能提高COD的去除率。获得了化学耗氧量COD 1000～1500mg／L废水除膦的优化条件：pH=5．5，Al-Fe、CTAB、PAM的投加量分别为300mg／L、67mg／L和21mg／L时，COD去除率达92．9％。