Comparative on Causes and Accumulation of Selenium in the Tree-rings Ambient High-selenium Coal Combustion Area from Yutangba, Hubei, China

Toxic trace elements emitted during coal combustion are the main sources of air pollution. They are released into the atmosphere mainly in the forms of fine ash, smoke and flue, and thus adversely affect plant, animal and human health. Selenium is one of toxic and the most volatile in coal. Large amount of atmospheric emission of selenium, as well as selenium present and scrubber stockpiles in ash may create serious environmental problems. In the paper, on the basis of investigating the abundance and distribution of selenium in plant-rings during recent 20 years, the bioaccumulation of selenium is explained that selenium in plant, which were collected from the village of selenium-rich coal combustion, is much higher than that in plants collected away from the village of selenium-rich coal combustion. The main origins of selenium are selenium-rich coal combustion and high-selenium rock weathered. The selenium recycle by food chain and selenium will accumulate and redistribute in environments.     

碎米荠对硒、镉超富集特性研究

超富集植物在营养元素生物强化及重金属污染植物修复技术领域有重大应用前景。通过野外调查和栽培实验,研究了碎米荠植物对硒镉的吸收富集特征。研究表明:野生碎米荠中Se含量达数百mg/kg,叶片中Se最高含量为1 365 mg/kg。地上部Se的生物富集系数在2.8~43.8的范围内,大部分超过10;生物转移系数在0.46~1.88之间,大部分大于1。地上部Cd含量都超过了100 mg/kg,叶中的Cd含量大部分在400~800 mg/kg之间。富集系数都大于1,且农田及小溪流域植株地上部Cd的生物富集系数高达几十甚至上百,Cd的生物转移系数大部分超过1。露天栽培条件下,碎米荠中的硒镉含量随盆栽土壤中硒镉浓度的上升呈现出先增加后降低的特征,当Se含量为50 mg/kg时植物中的Se含量最高,此时地上部Se含量为995 mg/kg,地下部Se含量1 100 mg/kg。当Cd浓度为80 mg/kg时,植株当中Cd含量最高,地上部和地下部中的Cd含量分别高达550 mg/kg、337 mg/kg。研究认为湖北渔塘坝发育的碎米荠植物是硒镉多元素超富集植物,在硒镉生态环境污染修复方面具有重大应用前景。     

A study on Se application for improving the soil in the environment at lower Se level

A result that application of sodium selenite or fly ash to some of soilin loess plateau can increase Se content in wheat grain has been demonstrated by the pot and field experiments, and added Se in soil can last its availability for 3 years. So this is a good measure for improving the low Se soils and preventing the Kaschin-Beck disease.     

Recycling of high purity selenium from CIGS solar cell waste materials

Copper indium gallium diselenide (CIGS) is a promising material in thin film solar cell production. To make CIGS solar cells more competitive, both economically and environmentally, in comparison to other energy sources, methods for recycling are needed. In addition to the generally high price of the material, significant amounts of the metals are lost in the manufacturing process. The feasibility of recycling selenium from CIGS through oxidation at elevated temperatures was therefore examined. During oxidation gaseous selenium dioxide was formed and could be separated from the other elements, which remained in solid state. Upon cooling, the selenium dioxide sublimes and can be collected as crystals. After oxidation for 1 h at 800 °C all of the selenium was separated from the CIGS material. Two different reduction methods for reduction of the selenium dioxide to selenium were tested. In the first reduction method an organic molecule was used as the reducing agent in a Riley reaction. In the second reduction method sulphur dioxide gas was used. Both methods resulted in high purity selenium. This proves that the studied selenium separation method could be the first step in a recycling process aimed at the complete separation and recovery of high purity elements from CIGS.     

Trace element levels in foetus-mother pairs of short-beaked common dolphins (Delphinus delphis) stranded along the French coasts

Tissues of foetus-mother pairs of common dolphins (Delphinus delphis) stranded along the French coasts (Bay of Biscay and English Channel) were analysed for their Cd, Cu, Hg, Se and Zn contents. In the kidneys, foetal Cd levels were extremely low, and strong relationships between Cu and Zn suggested the involvement of metallothioneins since early foetal life. The results also indicated a limited maternal transfer of Hg during pregnancy since levels in the tissues of foetuses were below 1 microg g(-1) w.wt. However, hepatic Hg levels in foetuses increased with body length, and were also proportionate to maternal hepatic, renal and muscular Hg levels. Lastly, affinities between Hg and Se in tissues would participate in Hg neutralisation in both mothers--through tiemannite granules--and fetuses--through reduced glutathione--counteracting the toxic effects linked to the particularly high quantities of methyl-Hg to which marine mammals are naturally exposed.     

New best estimates for radionuclide solid–liquid distribution coefficients in soils. Part 3: miscellany of radionuclides (Cd,Co, Ni,Zn, I,Se, Sb,Pu, Am,and others)

New best estimates for the solid–liquid distribution coefficient (K_d) for a set of radionuclides are proposed, based on a selective data search and subsequent calculation of geometric means. The K_d best estimates are calculated for soils grouped according to the texture and organic matter content. For a limited number of radionuclides this is extended to consider soil cofactors affecting soil–radionuclide interaction, such as pH, organic matter content, and radionuclide chemical speciation. Correlations between main soil properties and radionuclide K_d are examined to complete the information derived from the best estimates with a rough prediction of K_d based on soil parameters. Although there are still gaps for many radionuclides, new data from recent studies improve the calculation of K_d best estimates for a number of radionuclides, such as selenium, antimony, and iodine.     

Plant/soil concentration ratios for paired field and garden crops, with emphasis on iodine and the role of soil adhesion

In the effort to predict the risks associated with contaminated soils, considerable reliance is placed on plant/soil concentration ratio (CR) values measured at sites other than the contaminated site. This inevitably results in the need to extrapolate among the many soil and plant types. There are few studies that compare CR among plant types that encompass both field and garden crops. Here, CRs for 40 elements were measured for 25 crops from farm and garden sites chosen so the grain crops were in close proximity to the gardens. Special emphasis was placed on iodine (I) because data for this element are sparse. For many elements, there were consistent trends among CRs for the various crop types, with leafy crops > root crops ≥ fruit crops ≈ seed crops. Exceptions included CR values for As, K, Se and Zn which were highest in the seed crops. The correlation of CRs from one plant type to another was evident only when there was a wide range in soil concentrations. In comparing CRs between crop types, it became apparent that the relationships differed for the rare earth elements (REE), which also had very low CR values. The CRs for root and leafy crops of REE converged to a minimum value. This was attributed to soil adhesion, despite the samples being washed, and the average soil adhesion for root crops was 500 mg soil kg⁻¹ dry plant and for leafy crops was 5 g kg⁻¹. Across elements, the log CR was negatively correlated with log Kd (the soil solid/liquid partition coefficient), as expected. Although, this correlation is expected, measures of correlation coefficients suitable for stochastic risk assessment are not frequently reported. The results suggest that r ≈ −0.7 would be appropriate for risk assessment.     

Biogeochemical cycling of selenium in the San Joaquin Valley,California, USA

Subsurface agricultural drainage waters from western San Joaquin Valley, California, were found to contain elevated concentrations of the element selenium in the form of selenate. In 1978, these drainage waters began to replace previous input to Kesterson Reservoir, a pond system within Kesterson National Wildlife Refuge; this substitution was completed by 1982. In the 1983 nesting season, unusual rates of deformity and death in embryos and hatchlings of wild aquatic birds (up to 64% of eared grebe and American coot nests) occurred at the refuge and were attributed to selenium toxicosis. Features necessary for contamination to have taken place included geologic setting, climate, soil type, availability of imported irrigation water, type of irrigation, and the unique chemical properties of selenium. The mechanisms of biogeochemical cycling raise questions about other ecosystems and human exposure.     

An evaluation of selenium concentrations in water, sediment, invertebrates, and fish from the Solomon River Basin

The Solomon River Basin is located in north-central Kansas in an area underlain by marine geologic shales. Selenium is an indigenous constituent of these shales and is readily leached into the surrounding groundwater. Portions of the Basin are irrigated primarily through the pumping of selenium-contaminated groundwater from wells onto fields in agricultural production. Water, sediment, macroinvertebrates, and fish were collected from various sites in the Basin in 1998 and analyzed for selenium. Selenium concentrations were analyzed spatially and temporally and compared to reported selenium toxic effect thresholds for specific ecosystem components: water, sediments, food-chain organisms, and wholebody fish. A selenium aquatic hazard assessment for the Basin was determined based on protocol established by Lemly. Throughout the Basin, water, macroinvertebrate, and whole fish samples exceeded levels suspected of causing reproductive impairment in fish. Population structures of several fish species implied that successful reproduction was occurring; however, the influence of immigration of fish from low-selenium habitats could not be discounted. Site-specific fish reproduction studies are needed to determine the true impact of selenium on fishery resources in the Basin. The U.S. Government’s right to retain a non-exclusive, royalty free license in and to any copyright is acknowledged.     

Removal of Se(IV) from aqueous solution using sulphuric acid-treated peanut shell

A carbonaceous sorbent was prepared from peanut shell via sulphuric acid treatment. Se(IV) removal from aqueous solution on the sorbent was studied varying time, pH, Se(IV) concentration, temperature and sorbent status (wet and dry). Se(IV) removal was faster using the wet sorbent than the dry sorbent following a pseudo-first-order model. Se(IV) removal increases at low pH values, and decreases as pH increases until pH 7. Sorption was found to fit the Langmuir equation and sorption capacity for the wet sorbent was higher than that for the dry one. Both sorbents showed an increased selenium sorption by rising the temperature. Redox processes between Se(IV) and the carbon sorbent are involved. Analysis by scanning electron microscope and X-ray powder diffraction for the sorbent after the reaction with acidified Se(IV) confirmed the availability of elemental selenium as particles on the sorbent surface as a result of Se(IV) reduction. Physicochemical tests showed an increase in sorbent acidity, cation exchange capacity (CEC) and surface functionality after the reaction with acidified Se(IV), indicating the oxidation processes occurring on the sorbent surface. Due to its reduction properties, the sorbent seems efficient for Se(IV) removal from aqueous solution.