Explosion characteristics of micron- and nano-size magnesium powders

Explosion characteristics of micron- and nano-size magnesium powders were determined using CSIR-CBRI 20-L Sphere, Hartmann apparatus and Godbert-Greenwald furnace to study influence of particle size reduction to nano-range on these. The explosion parameters investigated are: maximum explosion pressure (P_max), maximum rate of pressure-rise (dP/dt)_max, dust explosibility index (K_St), minimum explosible concentration (MEC), minimum ignition energy (MIE), minimum ignition temperature (MIT), limiting oxygen concentration (LOC) and effect of reduced oxygen level on explosion severity. Magnesium particle sizes are: 125, 74, 38, 22, 10 and 1 μm; and 400, 200, 150, 100, 50 and 30 nm. Experimental results indicate significant increase in explosion severity (P_max: 7–14 bar, K_St: 98–510 bar·m/s) as particle size decreases from 125 to 1 μm, it is maximum for 400 nm (P_max: 14.6 bar, K_St: 528 bar·m/s) and decreases with further decrease of particle size to nano-range 200–30 nm (P_max: 12.4–9.4 bar, K_St: 460–262 bar·m/s) as it is affected by agglomeration of nano-particles. MEC decreases from 160 to 30 g/m³ on decreasing particle size from 125 to 1 μm, its value is 30 g/m³ for 400 and 200 nm and 20 g/m³ for further decrease in nano-range (150–30 nm). MIE reduces from 120 to 2 mJ on decreasing the particle size from 125 to 1 μm, its value is 1 mJ for 400, 200, 150 nm size and <1 mJ for 50 and 30 nm. Minimum ignition temperature is 600 °C for 125 μm magnesium, it varies between 570 and 450 °C for sizes 38–1 μm and 400–350 °C for size range 400–30 nm. Magnesium powders in nano-range (30–200 nm) explode less violently than micron-range powder. However, likelihood of explosion increases significantly for nano-range magnesium. LOC is 5% for magnesium size range 125–38 μm, 4% for 22–1 μm, 3% for 400 nm, 4% for 200, 150 and 100 nm, and 5% for 50 and 30 nm. Reduction in oxygen levels to 9% results in decrease in P_max and K_St by a factor of 2–3 and 4–5, respectively, for micron as well as nano-sizes. The experimental data presented will be useful for industries producing or handling similar size range micron- and nano-magnesium in order to evaluate explosibility of their magnesium powders and propose/design adequate safety measures.     

The Effects of Magnesium and Ammonium Additions on Phosphate Recovery from Greenhouse Wastewater

Phosphorus recovery from greenhouse wastewater, using precipitation-crystallization, was conducted under three levels of calcium concentration, 304 mg/L (7.6 mmol/L), 384 mg/L (9.6 mmol/L), and 480 mg/L (12 mmol/L), and also with additions of ammonium and magnesium into the wastewater. Jar test results confirmed high phosphate removal, with more than 90% of the removal achieved with a pH as low as 7.7. Under the low calcium concentration, ammonium addition affected the chemical reactions at pH lower than 8.0, where struvite was produced; when the pH was raised to 8.8, other calcium compounds dominated the precipitation. Under the medium calcium concentration, ammonium and magnesium addition helped struvite precipitation in the low pH range. Hydroxyapatite (HAP) was the main product. Under the high calcium concentration, ammonium addition showed no effects on the precipitation.     

Validation of the UN test method N.5

Many substances react with water in such a way that flammable gases are formed. For transport issues this reaction may possess a considerable hazard especially if the cargo is wetted by rain or by water from other sources. In the UN Recommendations on the Transport of Dangerous Goods these kinds of problems are addressed. The UN test N.5 “Test method for substances which in contact with water emit flammable gases” corresponds to this hazard. Classification according to the test method is done by measurement of the gas evolution rate of the flammable gas by any suitable procedure. At BAM a gravimetric approach is used to measure the gas evolution rate. In this paper we present the evaluation of the apparatus by means of an absolute calibration routine utilizing a reaction where a known amount of gas is produced as well as the evaluation of important parameters influencing the gas evolution rate using different substances. It can be shown that the apparatus is capable of measuring absolute gas volumes as low as 6 mL with an acceptable error of about 17% as determined from the reaction of Mg with demineralized water.     

镁厂回转窑除尘系统防燃防爆措施

镁厂忽视回转窑除尘系统的防燃防爆措施,已发生多起燃爆事故。本文提出多种防止燃爆的措施,实施后效果良好。     

Minimum ignition energies of pure magnesium powders due to electrostatic discharges and nitrogen's effect

This paper experimentally investigated the relation between the minimum ignition energy (MIE) of magnesium powders as well as the effect of inert nitrogen (N₂) on the MIE. The modified Hartmann vertical-tube apparatus and four kinds of different-sized pure magnesium powders (median particle size, D50; 28.1 μm–89.8 μm) were used in this study. The MIE of the most sensitive magnesium powder was 4 mJ, which was affected by the powder particle size (D50; 28.1 μm). The MIE of magnesium powder increased with an increase in the N₂ concentration for the inerting technique. The magnesium dust explosion with an electrostatic discharge of 1000 mJ was suppressed completely at an N₂ concentration range of more than 98%. The experimental data presented in this paper will be useful for preventing magnesium dust explosions generated from electrostatic discharges.     

Long-term depletion of calcium and other nutrients in eastern US forests

Both harvest removal and leaching losses can deplete nutrient capital in forests, but their combined long-term effects have not been assessed previously. We estimated changes in total soil and biomass N, Ca, K, Mg, and P over 120 years from published data for a spruce-fir site in Maine, two northern hardwood sites in New Hampshire, central hardwood sites in Connecticut and Tennessee, and a loblolly pine site in Tennessee. For N, atmospheric inputs counterbalance the outputs, and there is little long-term change on most sites. For K, Mg, and P, the total pool may decrease by 2%–10% in 120 years depending on site and harvest intensity. For Ca, net leaching loss is 4–16 kg/ha/yr in mature forests, and whole-tree harvest removes 200–1100 kg/ha. Such leaching loss and harvest removal could reduce total soil and biomass Ca by 20%–60% in only 120 years. We estimated unmeasured Ca inputs from rock breakdown, root-zone deepening, and dry deposition; these should not be expected to make up the Ca deficit. Acid precipitation may be the cause of current high leaching of Ca. Although Ca deficiency does not generally occur now in acid forest soils, it seems likely if anthropogenic leaching and intensive harvest removal continue.     

轻烧镁窑烟尘污染治理技术的筛选与应用

利用煤气发生炉生产煤气，烧结轻烧镁，具有产品质量高，大幅度削减烟尘排放量，节约能源等优点，该项技术具有广泛的推广价值，本文较详细地介绍了辽宁省轻烧镁窑烟尘污染治理技术的典型，具有同类技术的国内先进水平．     

MAP法处理氨氮废水最佳条件的研究

MAP法是一种比较新颖有效的处理氨氮的方法，该方法是通过化学沉淀的方式使废水中的氨氢浓度降到很低。而且沉淀反应不受温度、水中毒素的限制。由单项试验以及正交实验的方法对MAP法处理氨氮废水的工艺进行优化研究，结果表明，在pH=8.5，反应时间为3h,Mg:N:P=1:3:1.0:1.1时为较佳反应条件；氨氮的去除率随着反应时间的增加而增加，随着Mg:N比值的增加而增加。     

Determination of lipid peroxidation and cytotoxicity in calcium, magnesium, titanium and hectorite (SHCa-1) suspensions

This paper reports data on the relative ability of CaO, CaCl₂, MgO, MgCl₂, TiO₂, and hectorite (SHCa-1) to induce oxidative stress (as determined by lipid peroxidation, LP) in biological matrices. The effectiveness of structural (oxide form) versus soluble Ca and Mg to induce LP is compared. An assessment on cytotoxicity as affected by soluble and structural Ca, Mg, TiO₂ and SHCa-1 is also addressed. LP was screened and monitored using the Thiobarbituric Acid Reactive Substances (TBARS). The extent of TBARS production was found to vary with the type and initial concentration of the soluble or structural cation, Ca or Mg respectively. Obtained results showed higher magnitude values for the latter set of experiments. In the presence of TiO₂ no significant TBARS production was detected pointing out a negligible effect of TiO₂ on LP. At solid concentrations ca. 100 ppm, CaO appears to be more effective than SHCa-1 to induce LP. By contrast at ca. 25 ppm, MgO appears to be more effective than the clay mineral. The SHCa-1 LP-inducing activity has been proven to closely relate to structural Ca. The prevalence of mechanisms that may induce LP but not cytotoxicity (as determined by cell growth inhibition) was also addressed. Results on cell growth inhibition as affected by soluble and structural Ca, Mg, TiO₂ and hectorite provide evidence to support that structural Ca or Mg brings about significantly higher variations than soluble Ca.     

Experimental investigation on extinguishing performance of a novel nanocomposite for gaseous fires

A novel nanocomposite was synthesized by incorporating three different types of flame-retardants and its extinguishing performance was tested for gaseous fires. The nanocomposite consists of the inorganic magnesium hydroxide (MH) nanoparticles as the dominant component, the nitrogen-based melamine cyanurate (MCA), and the phosphorus-based ODOPB. The wet mixing, dry mixing, and ultrasonic agitation were employed in the preparation process to enhance the homogeneity of the nanocomposite. The prepared powders were characterized using a series of analytical instruments including X-ray diffraction (XRD), scanning electron microscopy (SEM), thermal gravity analyzer (TGA), and differential scanning calorimeter (DSC). The efficiency of various samples in extinguishing gaseous fires was investigated in a lab-scale extinguishing system. The fire extinguishing tests indicated that the nanocomposite is considerably more effective in fire extinguishing than other powders in terms of extinction time and agent mass consumed. The fire extinction time of nanocomposite was 45.2% shorter than that of commercial ABC-MAP powder. Furthermore, the consumed amount of nanocomposite was 63.2% less than that of commercial powder. In addition, the order of extinguishing mass concentrations was as follows: the novel nanocomposite (103.7 g/m³) < MH/MCA (148.1 g/m³) < MH/ODOPB (155.6 g/m³) < MH (170.4 g/m³) < commercial ABC powder (281.5 g/m³) < MCA/ODOPB (384.1 g/m³). The fire suppression mechanisms of the nanocomposite were also discussed. It was inferred that the extinguishing mechanism of nanocomposite comprised of simultaneous chemical and physical inhibition actions involving chemical inhibition action, cooling action, and asphyxiation action. This study provides a promising attempt to gain benefits from the striking features of nanotechnology and flame-retardants in extinguishing gaseous fires.