自动跟踪动压平衡烟尘采样仪的研制

ＧＭ１００Ｃ动压平衡自动跟踪烟尘采样仪,跟踪精度高,响应时间快,无需换孔板,只要拨动波段开关就可换采样嘴。     

大流量孔口流量计的校准、数据处理及误差分析

用罗兹流量计校准孔口流量计,用温度和大气压力对孔口流量计的负压进行修正,使孔口流量计的流量和压力修正项间的关系为一直线,得到孔口流量计的标准曲线并评价其精度。探讨了孔口流量计流量不确定度的主要来源,为精度控制提供了理论依据。      

The effect of orifice plates with different shapes on explosion propagation of premixed methane–air in a semi-confined pipeline

The effect of internal shape of obstacles on the deflagration of premixed methane–air (concentration of 10%) was experimentally investigated in a semi-confined steel pipeline (with a square cross section size of 80 mm × 80 mm and 4 m long). The obstacles used in this study were circular, square, triangular and gear-shaped (4-teeth, 6-teeth and 8-teeth) orifice plates with a blockage ratio of 75%, and the perimeter of the orifice was regarded as a criterion for determining the sharpness of the orifice plate. The overpressure history, flame intensity histories, flame front propagation speed, maximum flame intensity and peak explosion overpressure were analyzed. The explosion in the pipeline can be divided into two stages: initial explosion and secondary explosion. The secondary explosion is caused by recoiled flame. The perimeter is positively related to the intensity of the recoiled flame and the ability of orifice plate to suppress the explosion propagation. In addition, the increase in the perimeter will cause the acceleration of the flame passing through the orifice plate, while after the perimeter of the orifice reaches a certain value, the effect of the increase in perimeter on explosion excitation becomes no obvious. The overpressure (static pressure) downstream of the orifice plate is the result of the combined effect of explosion intensity and turbulence. The increase in perimeter leads to the increase in turbulence downstream of the orifice plate which in turn causes more explosion pressure to be converted into dynamic pressure.     

A new shock tube configuration for studying dust-lifting during the initiation of a coal dust explosion

The traditional defence against propagating coal dust explosions is the application of dry stone dust. This proven and effective safety measure is strictly regulated based on extensive international experience. While new products, such as foamed stone dust, offer significant practical benefits, no benchmark tests currently exist to certify their dust lifting performance in comparison to dry stone dust. This paper reviews the coal dust explosion mechanism, and argues that benchmark testing should focus on dust lifting during the initial development of the explosion, prior to arrival of the flame. In a practical context, this requires the generation of shock waves with Mach numbers ranging from 1.05 to 1.4, and test times of the order of 10's to 100's of milliseconds. These proposed test times are significantly longer than previous laboratory studies, however, for certification purposes, it is argued that the dust lifting behaviour should be examined over the full timescales of an actual explosion scenario. These conditions can be accurately targeted using a shock tube at length scales of approximately 50 m. It is further proposed that useful test time can be maximised if an appropriately sized orifice plate is fitted to the tube exit, an arrangement which also offers practical advantages for testing. The paper demonstrates this operating capability with proof-of-concept experiments using The University of Queensland's X3 impulse facility.