城市污泥-磷石膏陶粒的制备条件及性能分析

以城市污水处理厂剩余污泥和磷酸生产废渣磷石膏为原料制备多孔陶粒,考察不同配比、烧结温度及烧结时间对多孔陶粒堆积密度、吸水率及盐酸可溶率的影响。结果表明:在污泥与磷石膏混合比1∶4、烧结温度1 050℃、烧结时间15 min的条件下,可制得堆积密度为685.78 kg/m~3、吸水率27.34%、盐酸可溶率11.38%的陶粒,该陶粒内部含有丰富的膨胀气孔,可用作水处理滤料或建材骨料。     

Effect of water washing on the thermal behavior of rice straw

Rice straw can be used as a renewable fuel for heat and power generation. It is a viable mean of replacing fossil fuels and preventing pollution caused by open burning, especially in the areas where this residual biomass is generated. Nevertheless, the thermal conversion of rice straw can cause some operating problems such as slag formation, which negatively affects thermal conversion systems. So, the main objective of this research is studying the combustion behavior of rice straw samples collected from various regions by applying thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). In addition, the thermal behavior of ashes from rice straw was also analyzed in order to detect their melting points, and ash sintering was detected at different temperatures within the range between 550 and 1000 °C. Since washing rice straw with water could reduce the content of undesirable inorganic compounds related to the ash fusibility, samples of washed rice straw were analyzed under combustion conditions to investigate its differences regarding the thermal behavior of rice straw. The results showed that rice straw washing led to a significant improvement in its thermal behavior, since it reduced the ash contents and sintering formation.     

Coupling mechanism of activated carbon mixed with dust for flue gas desulfurization and denitrification

To clarify the effect of coking dust, sintering dust and fly ash on the activity of activated carbon for various industrial flue gas desulfurization and denitrification, the coupling mechanism of the mixed activated carbon and dust was investigated to provide theoretical reference for the stable operation. The results show that coking dust had 34% desulfurization efficiency and 10% denitrification efficiency; correspondingly, sintering dust and fly ash had no obvious desulfurization and denitrification activities. For the mixture of activated carbon and dust, the coking dust reduced the desulfurization and denitrification efficiencies by blocking the pores of activated carbon, and its inhibiting effect on activated carbon was larger than its own desulfurization and denitrification activity. The sintering dust also reduced the desulfurization efficiency on the activated carbon while enhancing the denitrification efficiency. Fly ash blocked the pores of activated carbon and reduced its reaction activity. The reaction activity of coking dust mainly came from the surface functional groups, similar to that of activated carbon. The reaction activity of sintering dust mainly came from the oxidative property of Fe₂O₃, which oxidized NO to NO₂ and promoted the fast selectively catalytic reduction (SCR) of NO to form N₂. Sintering dust was activated by the joint action of activated carbon, and both had a coupling function. Sintering dust enhanced the adsorption and oxidation of NO, and activated carbon further promoted the reduction of NO_x by NH₃; thus, the denitrification efficiency increased by 5%-7% on the activated carbon.     

柳暗花明又一村,策马扬鞭再奋蹄——参观湘钢烧结烟气石灰石-石膏湿法脱硫技术的感想

近1—2年我国烧结烟气脱硫技术有了很大的进步,本文着重说明了钢铁烧结烟气脱硫技术(湿法)技术的突破,解决了堵塞、腐蚀、冒雨、结垢的问题。说明了该项技术具有广泛的前景。     

Emission characterization of unintentionally produced persistent organic pollutants from iron ore sintering process in China

Emission of unintentionally produced persistent organic pollutants (Unintentional POPs), including polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychorinated biphenyls (PCBs), hexachlorobenzene (HxCBz) and pentachlorobenzene (PeCBz), were investigated in four typical iron ore sintering plants in China. The emission factors and annual mass releases of the Unintentional POPs were calculated. The results indicated that PCDFs contributed more than 60% to the overall toxic equivalent quantity (TEQ) values, while the contribution of the dl-PCBs is relatively low, and only in the range of 8-9%. The dominant congeners of PCDD/Fs and dl-PCBs contributing most to the total TEQ were 1,2,3,7,8-PeCDD, 2,3,4,7,8-PeCDF and PCB-126. With regard to the TEQ contributions, the most abundant homologues were PeCDFs and HxCDD/Fs, followed by PeCDDs and non-ortho dl-PCB, whereas HpCDD/Fs, OCDD/Fs and mono-ortho dl-PCBs almost made no contributions. Due to the massive use of recycled waste in the feeding materials, the average emission factor of PCDD/Fs and dl-PCBs of the four plants was 3.95 μg WHO-TEQ ton⁻¹. Based on the results, the annual release of PCDD/Fs and dl-PCBs in 2007-2009 were estimated to be 2070 g, 2212 g, and 2307 g WHO-TEQ, respectively.     

炼钢炼铁除尘污泥直接应用于烧结配料的实践

介绍了炼钢炼铁除尘污泥直接用于烧结配料的新工艺。     

The effect of heating temperature of thin film transistor-liquid crystal display (TFT-LCD) optical waste glass as a partial substitute partial for clay in eco-brick

In order to fulfill the current WEEE directives, the traditional approach to manage thin film transistor-liquid crystal display (TFT-LCD) waste glass is inadequate. It is a serious opportunity to achieve resource conservation, reduction, stabilization and safety of management of TFT-LCD in the near future. To assist in achieving these goals, this study investigated the sintering characteristics and material properties of TFT-LCD waste glass, which can be pulverized and ground and subsequently blended with clay, at various substitution levels (0–40%) and finally fired from 800 °C to 1000 °C to make eco-brick. The brick thus produced was analyzed to determine variations in weight losses on ignition, 24-h absorption, bulk density, shrinkage, compressive strength and microstructure changes. The results for specific gravity, water adsorption, and compressive strength revealed that bricks made from mixtures containing TFT-LCD waste glass met the general requirements for bricks. The advantages of less water absorption, less weight loss on ignition, and a gain in compressive strength in the clay-TFT-LCD waste glass bricks should encourage the use of TFT-LCD waste glass as a brick additive.     

轻烧镁窑烟尘污染治理技术的筛选与应用

利用煤气发生炉生产煤气，烧结轻烧镁，具有产品质量高，大幅度削减烟尘排放量，节约能源等优点，该项技术具有广泛的推广价值，本文较详细地介绍了辽宁省轻烧镁窑烟尘污染治理技术的典型，具有同类技术的国内先进水平．     

烧结机头烟气脱硫脱硝技术比较分析

本文提出了目前常见的两种烧结机头烟气脱硫脱硝超低排放工艺技术:CFB脱硫+SCR脱硝工艺和活性焦脱硫脱硝一体化工艺,并对两种脱硫脱硝技术的工艺过程和工艺特点进行了比较和分析。     

Reuse of sugarcane bagasse ash (SCBA) to produce ceramic materials

Sugarcane bagasse ash (SCBA) is a residue resulting from the burning of bagasse in boilers in the sugarcane/alcohol industry. SCBA has a very high silica concentration and contains aluminum, iron, alkalis and alkaline earth oxides in smaller amounts. In this work, the properties of sintered ceramic bodies were evaluated based on the concentration of SCBA, which replaced non-plastic material. The ash was mixed (up to 60 wt%) with a clayed raw material that is used to produce roof tiles. Prismatic probes were pressed and sintered at different temperatures (up to 1200 °C). Technological tests of ceramic probes showed that the addition of ash has little influence on the ceramic properties up to 1000 °C. X-ray diffraction and thermal analysis data showed that, above this temperature the ash participates in the sintering process and in the formation of new important phases. The results reported show that the reuse of SCBA in the ceramic industry is feasible.