ESTIMATING REFERENCE EVAPORATION IN THE CENTRAL VALLEY OF CALIFORNIA USING THE LINACRE MODEL1

ABSTRACT: The Linacre (1988) model for calculating evaporation from open water or well-watered surfaces only requires inputs of air temperature, latitude and elevation, and windspeed if it is available. The model was developed using data collected at a large number of sites in different climatic regions of the world, while independent tests of the model have shown it to be suitable for estimating evaporation in a variety of locations. This study was intended to contribute to the broad goal of evaluating temperature-based evaporation models for use in California by testing the Linacre model in the agriculturally intensive Central Valley. Observed monthly mean reference evaporation (E_o) and meteorological data for periods ranging up to 72 months were obtained from 25 California Irrigation and Management Information System (CIMIS) stations distributed throughout the Central Valley. Uncalibrated and calibrated Linacre models were used to estimate monthly mean reference evaporation, and the performance of each model was evaluated using indices that quantified the random and systematic errors and overall model performance. The accuracy of the radiation and ventilation components of the model were evaluated separately. The uncalibrated model was found to systematically overestimate E_o with most of the model error being attributed to the ventilation component. Calibration of the radiation and ventilation components removed most of the systematic model errors, and the root mean square error for monthly mean E_o was 0.676 mm day^?1 (16.8 percent of the mean observed value). (KEY TERMS: reference evaporation; Linacre model; irrigation scheduling.)