3-D Flow Modeling of a Hazardous Waste Incinerator

A three-dimensional flow model of a hazardous waste incinerator kiln and vertical secondary combustion chamber arrangement was constructed to evaluate critical system parameters. The chamber wall configuration, location and arrangement of burners, and the positioning of the outlet duct were examined to determine the critical secondary combustion chamber gas residence time and mixing of the combustion flows. The scale model consisted of the rotary kiln as a primary combustion chamber, the secondary combustion chamber, two burners, and the exhaust ducting. Flue gas velocities in the model inlets and outlet were maintained to provide a Reynolds numbers equal to the full size unit. Patterns of smoke which were injected into the model inlets were viewed to evaluate flow mixing. Slow motion playback of video tape was used to determine the minimum residence time of flow in the high temperature combustion zone. The results of the model study were used to complete the engineering of a waste incineration system.