| 30CrMnSiNi2A钢壳体毛坯的温挤压成形工艺研究 |
| |
| 引用本文： | 伍太宾,周强.30CrMnSiNi2A钢壳体毛坯的温挤压成形工艺研究[J].装备环境工程,2004,22(1):11-13. |
| |
| 作者姓名： | 伍太宾 周强 |
| |
| 作者单位： | 重庆工商大学机械与包装工程学院，重庆工商大学机械与包装工程学院 重庆400067，重庆400067 |
| |
| 摘 要： | 针对30CrMnSiNi2A超高强度钢制壳体毛坯的结构特点和材料工艺特性,对该壳体毛坯的温挤压成形工艺进行了大量的试验研究;并采用"正交试验方法"对温挤压工艺参数进行了优化设计。经过理化检测和使用结果表明,采用温挤压工艺生产的30CrMnSiNi2A钢制壳体毛坯锻件完全满足壳体的使用要求,各项性能指标合格。
|
| 关 键 词： | 30CrMnSiNi2A 温挤压 壳体 毛坯 |
| 文章编号： | 1000-8446(2004)01-0011-03 |
| 修稿时间： | 2003年11月26 |
Study on the Warm Extrusion of Shell Body Blank Made by 30CrMnSiNi2A |
| |
| WU Tai-bin,ZHOU Qiang.Study on the Warm Extrusion of Shell Body Blank Made by 30CrMnSiNi2A[J].Equipment Environmental Engineering,2004,22(1):11-13. |
| |
| Authors: | WU Tai-bin ZHOU Qiang |
| |
| Abstract: | In view of the construction feature of shell body blank made by 30CrMnSiNi2A and the specific property of material,the experiments are performed to investigate the warm extrusion of shell body blank;and the optimized design of major process parameters are finished by means of "experimental-orthogonal method"?The experimented results show that the forging of shell body manufactured by warm extrusion fulfil quality requirements,and each of property target is up to standard? |
| |
| Keywords: | 30CrMnSiNi2A warm extrusion shell body blank |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
