首页 | 本学科首页   官方微博 | 高级检索  
     检索      

压模成型对RDF热解动力学的影响
引用本文:汪雄平,洪丽娟,吴家正,肖郴松,朱彤.压模成型对RDF热解动力学的影响[J].环境科学,2002,23(3):102-106.
作者姓名:汪雄平  洪丽娟  吴家正  肖郴松  朱彤
作者单位:同济大学热能工程系,上海,200092
基金项目:国家自然科学基金资助项目(29697003);同济大学科技发展基金资助项目
摘    要:对城市生活垃圾衍生燃料(RDF)进行压模成型处理,改变其空间结构如比表面积、孔结构等,然后在TB-1型热天平中测试不同温度下的热解TG曲线,分析各种动力学参数,得出RDF性质、空间结构对热解反应速率、活化能、指前因子等动力学参数的影响规律.试验结果表明,压型试样的反应速率明显低于未压型试样,最佳热解反应温度段为550℃~650℃.部分压型试样的活化能和指前因子之间存在着补偿效应,虽然压型试样的活化能有所减少,但指前因子有约10倍左右的大幅度减小.

关 键 词:RDF  热解  压模成型  动力学  孔结构
文章编号:0250-3301(2002)03-05-0102
收稿时间:2001/6/12 0:00:00
修稿时间:2001年6月12日

The Effect of Compression Treatment on RDF Pyrolysis
Wang Xiongping,Hong Lijuan,Wu Jiazheng,Xiao Chensong and Zhu Tong.The Effect of Compression Treatment on RDF Pyrolysis[J].Chinese Journal of Environmental Science,2002,23(3):102-106.
Authors:Wang Xiongping  Hong Lijuan  Wu Jiazheng  Xiao Chensong and Zhu Tong
Institution:Dept. of Thermal Energy Engineering, Tongji University, Shanghai 200092, China.
Abstract:The micropore surface area and micropore structure of refuse derived fuel (RDF) was changed by compression treatment. Thermogravimetric curves can be obtained at different pyrolysis temperatures, to estimate some of the kinetic parameters of different samples. A number of data collected and analysis was presented in the paper, together with the rules of kinetic parameters and discussion on the influence of the character of RDF's micropore structure. The reaction rates of the compressed samples were much lower than those of the uncompressed samples. And the optimal reaction temperature was 550 degrees C-650 degrees C. There was a compensation effect between activation energy and the Arrhenius parameters of some compressed samples. The activation energy decreases and the Arrhenius parameters are ten times less than uncompressed samples.
Keywords:RDF  pyrolysis  compression  kinetic  pore structure
本文献已被 CNKI 维普 万方数据 PubMed 等数据库收录!
点击此处可从《环境科学》浏览原始摘要信息
点击此处可从《环境科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号