首页 | 本学科首页   官方微博 | 高级检索  
     检索      

MWNTs/TiO2/聚酯功能复合膜吸附及其净化性能
引用本文:柳丽芬,郑国华,杨凤林.MWNTs/TiO2/聚酯功能复合膜吸附及其净化性能[J].中国环境科学,2009,29(2):213-218.
作者姓名:柳丽芬  郑国华  杨凤林
作者单位:大连理工大学环境生命学院,教育部工业生态与环境工程重点实验室,辽宁,大连,116023
基金项目:国家自然科学基金,辽宁省自然科学基金 
摘    要:以聚酯工业滤布为基膜,采用溶胶凝胶和浸渍方法制备了具有吸附-光催化功能的多壁碳纳米管(MWNTs)/TiO2涂层的复合膜,该复合膜对模拟水样低浓度(10mg/L)的双酚A具有较高吸附性能.随着复合膜上负载二氧化钛中的MWNTs的比例(17.6%,29.9%,和46.0%)增加,吸附去除率显著提高;吸附饱和的复合膜上的污染物双酚A可通过20W 紫外灯(l=254nm)照射Fenton氧化反应去除.吸附实验和HPLC分析表明,除了超声处理会引起浸渍负载的材料脱落外,复合膜吸附性能恢复较好.

关 键 词:复合膜  双酚A(BPA)  吸附性能  
收稿时间:2008-07-25;

MWNTs/TiO2 composite functional membranes and their adsorption properties
LIU Li-fen,ZHENG Guo-hua,YANG Feng-lin.MWNTs/TiO2 composite functional membranes and their adsorption properties[J].China Environmental Science,2009,29(2):213-218.
Authors:LIU Li-fen  ZHENG Guo-hua  YANG Feng-lin
Abstract:Series of composite functional membranes, containing adsorptive multi-walled carbon nanotubes(MWNTs), and photocatalytic TiO2, based on polyethylene (PET) filter cloth, were prepared by using a sol-gel and dip-coating method. The membrane could remove low concentration (10mg/L) BPA (bisphenol A) efficiently from simulate polluted water sample. With the proportional increase of MWNTs to MWNTs+TiO2 (17.6%, 29.9%, 46.0%), removal rate of BPA increased accordingly. The adsorbed BPA on the saturated membrane could be removed by 2h (20W 254nm) UV-Fenton oxidation reaction. Repeated adsorption and HPLC analysis proved that the adsorption capacity of the studied membrane could be regenerated successfully, despite the detachment of MWNTs/TiO2 occurred when ultrasonically treated.
Keywords:composite functional membranes  bisphenol A (BPA)  adsorption property
本文献已被 万方数据 等数据库收录!
点击此处可从《中国环境科学》浏览原始摘要信息
点击此处可从《中国环境科学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号