The sorption of hydrogen sulfide from hot syngas by metal oxides over supports

Six 5 wt.% metal sorbents including Mn, Fe, Cu, Co, Ce and Zn supported on gamma-Al2O3, prepared by the incipient wetness impregnation method with calcination at 700 degrees C for 2 h, have been investigated for sorption of hydrogen sulfide in the temperature range of 500-700 degrees C. The sorption experiments were conducted in a fixed-bed reactor in terms of breakthrough curves and characterized by X-ray powder diffraction. The results reveal that the copper and manganese sorbents exhibit the best performance because they provide nearly 100% utilization, but the copper sorbent has a lower sulfur sorption capacity compared with the manganese sorbent. The zinc and cerium sorbents are not good candidates attributed to the vaporization of zinc and unexpected product for cerium. Effects of support materials on 5 wt.% manganese were also investigated by using gamma-Al2O3, SiO2 and TiO2 in this study. Five weight percent Mn/gamma-Al2O3 shows the best performance among support candidates. On the basis of XRPD and BET surface area analysis, TiO2 appears a huge loss in BET surface area associated with a significant formation of rutile form.