| 30CrMnSiA钢薄壁筒错距旋压成形工艺研究 |
| |
| 引用本文： | 杨毅刚,张立武,韩冬. 30CrMnSiA钢薄壁筒错距旋压成形工艺研究[J]. 装备环境工程, 2004, 22(2): 64-66 |
| |
| 作者姓名： | 杨毅刚 张立武 韩冬 |
| |
| 作者单位： | 西安航天动力机械厂，西安航天动力机械厂，西安航天动力机械厂 陕西西安 710025，陕西西安 710025，陕西西安 710025 |
| |
| 摘 要： | 通过对30CrMnSiA钢筒体错距旋压试验,系统研究了毛坯厚度、减薄率、旋轮压下量分配、旋压道次及道次间热处理等工艺参数对旋压过程和产品质量的影响。结果表明:较厚的30CrMnSiA钢毛坯,不用道次间热处理,通过两道次或三道次错距旋压,就可获得高质量的薄壁筒。
|
| 关 键 词： | 30CrMnSiA钢 错距旋压 工艺参数 薄壁筒 |
| 文章编号： | 1000-8446(2004)02-0064-03 |
| 修稿时间： | 2004-01-10 |
Research on Stagger Spinning Forming Process of 30CrMnSiA Steel Feathered Tube |
| |
| YANG Yi-gang,ZHANG Li-wu,HAN Dong. Research on Stagger Spinning Forming Process of 30CrMnSiA Steel Feathered Tube[J]. Equipment Environmental Engineering, 2004, 22(2): 64-66 |
| |
| Authors: | YANG Yi-gang ZHANG Li-wu HAN Dong |
| |
| Abstract: | Through the experiment of 30CrMnSiA steel tube stagger spinning, the influences of process parameters-thickness of blank, reduction, feed distribution of rollers, spinning courses, heat treatment, etc-on the spinning process and product quality were studied systematically. Experimental results indicate that, for the thicker blank, two or three stagger spinning courses without heat treatment between two courses can lead to high quality feathered tube. |
| |
| Keywords: | 30CrMnSiA steel Stagger spinning Process parameters Feathered tube |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
