| Abstract: | The effectiveness of inorganic alumino-silicate sorbents (alumina and kaolinite) to adsorb airborne lead and cadmium from the effluent stream of a simulated waste incinerator was studied. A 20 kW (68,000 BTU/h) flow reactor was used to achieve the temperature and residence times typical of a waste incinerator. Solutions containing lead or cadmium were introduced yielding airborne metals concentrations between 15 and 150 ppm. Gas samples were drawn into a particle impactor that collected the airborne particles and condensed phase metal aerosols, separating them into ten size ranges from 0.2 μm to greater than 10 μm. Metals to sorbent mass ratios between 0.03 and 1.56 were investigated. Scavenging efficiency increased as the ratio of sorbent to injected metal mass was increased. The scavenging efficiencies were as high as 76% for lead scavenged by kaolinite to as low as 14% for cadmium scavenged by alumina. |
