Manufacture of artificial aggregate using MSWI bottom ash |
| |
Authors: | R Cioffi F ColangeloF Montagnaro L Santoro |
| |
Institution: | a Dipartimento per le Tecnologie, Università di Napoli Parthenope, Centro Direzionale Is. C4, 80143 Napoli, Italy b Dipartimento di Chimica, Università di Napoli Federico II, Complesso Universitario di Monte S. Angelo, Via Cintia, 80126 Napoli, Italy |
| |
Abstract: | This paper reports the results of an investigation on material recovery by stabilization/solidification of bottom ash coming from a municipal solid waste incineration plant. Stabilization/solidification was carried out to produce artificial aggregate in a rotary plate granulator by adding hydraulic binders based on cement, lime and coal fly ash. Different mixes were tested in which the bottom ash content ranged between 60% and 90%. To avoid undesirable swelling in hardened products, the ash was previously milled and then granulated at room temperature. The granules were tested to assess their suitability to be used as artificial aggregate through the measurement of the following properties: density, water absorption capacity, compressive strength and heavy metals release upon leaching. It was demonstrated that the granules can be classified as lightweight aggregate with mechanical strength strongly dependent on the type of binder. Concrete mixes were prepared with the granulated artificial aggregate and tested for in-service performance, proving to be suitable for the manufacture of standard concrete blocks in all the cases investigated. |
| |
Keywords: | |
本文献已被 ScienceDirect 等数据库收录! |
|