首页 | 本学科首页   官方微博 | 高级检索  
     检索      

新型换热器的传热性能研究
引用本文:朱桂华,唐啸,马凯,王照鲁,高明泉,朱宏斌.新型换热器的传热性能研究[J].环境工程,2015,33(2):96-99.
作者姓名:朱桂华  唐啸  马凯  王照鲁  高明泉  朱宏斌
作者单位:中南大学机电工程学院,长沙,410083
基金项目:湖南省科技计划重点资助项目(2014SK2020)
摘    要:提出一种适合污泥处理过程中的余热回收的新型隔板管壳换热器,并与同样规格的普通管壳换热器性能进行对比。建立了简化的壳程计算模型,应用FLUENT计算软件分别对普通管壳换热器和新型隔流板式换热器进行数值模拟,获得了2种热交换壳程内部的流动分布、温度分布和压力分布,并将模拟结果和试验数据进行对比。试验及模拟结果表明,新型隔板式换热器温度分布均匀、流动死区少、传热效率高,综合性能远高于普通管壳换热器。

关 键 词:新型管壳换热器    隔流板    温度场    速度场    传热效率

STUDY ON THE HEAT TRANSFER PERFORMANCE OF NEW-STYLE HEAT EXCHANGER
Zhu Guihua , Tang Xiao , Ma Kai , Wang Zhaolu , Gao Mingquan , Zhu Hongbin.STUDY ON THE HEAT TRANSFER PERFORMANCE OF NEW-STYLE HEAT EXCHANGER[J].Environmental Engineering,2015,33(2):96-99.
Authors:Zhu Guihua  Tang Xiao  Ma Kai  Wang Zhaolu  Gao Mingquan  Zhu Hongbin
Institution:Zhu Guihua;Tang Xiao;Ma Kai;Wang Zhaolu;Gao Mingquan;Zhu Hongbin;School of Mechanical and Electrical Engineering,Central South University;
Abstract:A new type of shell and tube heat exchanger was designed for heat recovery in sludge treatment process,compared with performance of a conventional shell and tube heat exchanger of the same specification. A simplified calculation model of shell and tube heat exchanger was set up,and FLUENT software was used to simulate the common shell heat exchanger and the new type heat exchanger,the flow distribution,the distribution of temperature and pressure inside the shell of the two heat exchangers were got,the simulation result was compared with the experimental data. The experimental and simulated results showed that new plate type heat exchanger has even temperature distribution,less flow dead zones,high heat transfer efficiency,and its comprehensive performance was far higher than that of ordinary shell and tube heat exchanger.
Keywords:new-style shell-and-tube heat exchanger  baffle plate  temperature field  velocity field  heat transfer efficiency
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《环境工程》浏览原始摘要信息
点击此处可从《环境工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号