| 核电厂换料水池底部密封结构密封元件的性能分析 |
| |
| 引用本文： | 翁娜,徐峰.核电厂换料水池底部密封结构密封元件的性能分析[J].装备环境工程,2014,11(2):106-111. |
| |
| 作者姓名： | 翁娜 徐峰 |
| |
| 作者单位： | 上海核工程研究设计院，上海200233;上海核工程研究设计院，上海200233 |
| |
| 摘 要： | 目的研究某核电厂换料水池底部密封结构中密封元件的性能。方法利用有限元分析软件ANSYS,采用超弹单元建立换料水池底部密封结构密封元件的二维轴对称模型,并运用接触单元模拟密封接触界面进行计算分析。结果经计算得到换料水池底部密封结构密封元件的预紧力-变形量曲线。结论计算结果为分析换料水池底部密封结构密封试验的泄漏原因提供了理论依据,同时也为工程中密封元件预紧力的确定提供了较有价值的参考。
|
| 关 键 词： | 水池底部密封结构 密封元件 有限元 预紧力 变形 |
| 收稿时间： | 2013/10/21 0:00:00 |
| 修稿时间： | 2013/12/15 0:00:00 |
Sealing Performance Analysis of Sealing Element in the Floor Sealing Structure of Refueling Pool in Nuclear Power Plant |
| |
| WENG Na and XU Feng.Sealing Performance Analysis of Sealing Element in the Floor Sealing Structure of Refueling Pool in Nuclear Power Plant[J].Equipment Environmental Engineering,2014,11(2):106-111. |
| |
| Authors: | WENG Na and XU Feng |
| |
| Institution: | Shanghai Nuclear Engineering Research and Design Institute, Shanghai200233, China;Shanghai Nuclear Engineering Research and Design Institute, Shanghai200233, China |
| |
| Abstract: | ObjectiveTo study the sealing performance of the floor sealing structure of the refueling pool in a nuclear power plant.MethodsAn axial-symmetry finite element model of the sealing component using super elastic element was built by ANSYS. Then the contact surface of the sealing structure was simulated by the contact element.ResultsA curve between preloaded force and deformation was calculated.ConclusionThe results can be used to solve the test leakage problem of the floor sealing structure of refueling pool and could also be used as a reference in getting preloaded force of sealing components. |
| |
| Keywords: | floor sealing structure of refueling pool sealing component finite element preloaded fore deformation |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《装备环境工程》浏览原始摘要信息 |
| 点击此处可从《装备环境工程》下载免费的PDF全文 |
