HCI Sorption by Dry NaHCO3 for Incinerator Emissions Control |
| |
| Authors: | Kenneth T. Fellows Michael J. Pilat |
| |
| Affiliation: | Department of Civil Engineering , University of Washington , Seattle , Washington , USA |
| |
| Abstract: | The sorption of hydrochloric acid (HCI) by thermally decomposed sodium bicarbonate (NaHCO3) was investigated using a fixed-bed reactor containing sorbent particles dispersed in a bed of spherical glass beads. The gas flow rate (68° F and 760 mm Hg) was 0.039 cfm (1.1 liter/min) and the bed had a cross-sectional area of 0.0055 sq. ft. (5.1 sq. cm). The influence of particle diameter (10, 45 and 163 μm), temperature (225, 275, 375, 455, and 550° F), superficial gas velocity (11 and 21 fpm at reactor conditions, 375° F), and Inlet HCI gas concentration (415 ppm and 760 ppm in N2, 275 and 455° F) were studied. Results showed that HCI sorption increased strongly with increasing temperature but was only weakly dependent on particle diameter, superficial gas velocity, and HCI gas concentration. |
| |
| Keywords: | |
|
|
