Emission Characteristics of Volatile Organic Compounds from Semiconductor Manufacturing |
| |
| Authors: | HungMin Chein Tzu Ming Chen |
| |
| Institution: | 1. Environmental Health and Air Pollution Division, Center for Environmental, Safety, and Health Technology , Industrial Technology Research Institute , Hsin-chu , Taiwan hmchein@itri.org.tw;3. Environmental Health and Air Pollution Division, Center for Environmental, Safety, and Health Technology , Industrial Technology Research Institute , Hsin-chu , Taiwan |
| |
| Abstract: | Abstract A huge amount of volatile organic compounds (VOCs) is produced and emitted with waste gases from semiconductor manufacturing processes, such as cleaning, etching, and developing. VOC emissions from semiconductor factories located at Science-Based Industrial Park, Hsin-chu, Taiwan, were measured and characterized in this study. A total of nine typical semiconductor fabricators (fabs) were monitored over a 12-month period (October 2000-September 2001). A flame ionization analyzer was employed to measure the VOC emission rate continuously in a real-time fashion. The amount of chemical use was adopted from the data that were reported to the Environmental Protection Bureau in Hsin-chu County as per the regulation of the Taiwan Environmental Protection Administration. The VOC emission factor, defined as the emission rate (kg/month) divided by the amount of chemical use (L/month), was determined to be 0.038 ± 0.016 kg/L. A linear regression equation is proposed to fit the data with the correlation coefficient (R2) = 0.863. The emission profiles of VOCs, which were drawn using the gas chromatograph/mass spectrometer analysis method, show that isopropyl alcohol is the dominant compound in most of the fabs. |
| |
| Keywords: | |
|
|
