首页 | 本学科首页   官方微博 | 高级检索  
     检索      

日处理1200立方米印染废水工程实例
引用本文:张雷,崔红涛,刘娜,周强,卢晓光,刘文武,侯素霞.日处理1200立方米印染废水工程实例[J].环境工程,2008(Z1).
作者姓名:张雷  崔红涛  刘娜  周强  卢晓光  刘文武  侯素霞
作者单位:中国冶金地质总局地球物理勘查院;邢台职业技术学院资源与环境工程系;
摘    要:采用絮凝沉淀+水解酸化+生物接触氧化工艺处理印染废水。工程运行表明,印染废水在进水COD、BOD5、SS浓度分别在800、4002、00 mg/L,色度400倍的条件下,经处理后,外排废水COD、BOD5、SS浓度分别为27.2、25、32 mg/L,色度40倍。该工艺运行管理方便,剩余污泥量小,能广泛应用于印染废水处理的实际工作中。

关 键 词:印染废水  絮凝沉淀  水解酸化  生物接触氧化  

AN ENGINEERING EXAMPLE OF TREATING PRINTING AND DYEING WASTEWATER WITH A CAPACITY OF 1200 m~3/d
Zhang Lei Cui Hongtao Liu Na Zhou Qiang Lu Xiaoguang Liu WenwuHou Suxia.AN ENGINEERING EXAMPLE OF TREATING PRINTING AND DYEING WASTEWATER WITH A CAPACITY OF 1200 m~3/d[J].Environmental Engineering,2008(Z1).
Authors:Zhang Lei Cui Hongtao Liu Na Zhou Qiang Lu Xiaoguang Liu WenwuHou Suxia
Institution:Zhang Lei Cui Hongtao Liu Na Zhou Qiang Lu Xiaoguang Liu Wenwu(Geophysical Survey Institute of China Metallurgical Geological Bureau Baoding 071051)Hou Suxia(Resoures , Eavironmental Engineering Department,Xingtai Professional Technical College Xingtai 054035)
Abstract:A process of flocculative deposition-hydrolytic acidification-contact oxidation was used to treat printing & dyeing wastewater.The operation result showed that the efflucent's COD,BOD_5,SS and colority would be 27.2 mg/L,25 mg/L,32 mg/L and 40 times respectively after treatment if the influent's COD,BODr,SS and colority were 800 mg/L,400 mg/L,200 mg/L and 400 times.This process features convenient operation and management,as well as small volume of residual sludge.
Keywords:printing & dyeing wastewater flocculative deposition hydrolytic acidification contact oxidation  
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号