首页 | 本学科首页   官方微博 | 高级检索  
     检索      

电絮凝技术处理洗车废水试验
引用本文:储金宇,李玉蓉,李宁,杜彦生.电絮凝技术处理洗车废水试验[J].工业安全与环保,2012,38(5):18-20,30.
作者姓名:储金宇  李玉蓉  李宁  杜彦生
作者单位:江苏大学环境学院,城市水资源与水环境国家重点实验室江苏大学研究中心 江苏镇江,212013
基金项目:江苏省成果产业化推进项目
摘    要:采用电絮凝技术处理洗车废水,以保证处理后出水能够循环利用。考察电流密度、初始pH值、NaCl浓度及电解时间等操作因素对COD与浊度去除效果的影响。结果表明,在最佳处理条件下,出水达到生活杂用水水质标准;另外,去除COD过程符合一级动力学模型,去除单位浓度COD产生4.02×10-3kg湿污泥、3.10×10-4kg干污泥。

关 键 词:洗车废水  电絮凝  回用  动力学模型  污泥量

Treatment of Vehicle-washing Wastewater by Electro-coagulation Process
CHU Jinyu , LI Yurong , LI Ning , DU Yansheng.Treatment of Vehicle-washing Wastewater by Electro-coagulation Process[J].Industrial Safety and Dust Control,2012,38(5):18-20,30.
Authors:CHU Jinyu  LI Yurong  LI Ning  DU Yansheng
Institution:(School of Environment,Research Center of State Key Lab of Urban Water Resource and Environment,Jiangsu University Zhenjiang,Jiangsu 212013)
Abstract:Electro-coagulation process is adopted to treat vehicle-washing wastewater for reuse.The effects of parameters(such as current density,initial pH, electrolyte NaCl concentration,electrolysis time,and so on) on the removal efficiency of COD and turbidity in the wastewater are studied.The result shows treated water could meet Water Quality Standard for Urban Water Consumption under these optimal conditions.Furthermore,the kinetic model for COD reduction agrees with first-order reaction kinetic model.Removing 1 mg/L COD could produce 4.02×10-3 kg wet sludge and 3.10×10-4 kg dry sludge.
Keywords:vehicle-washing wastewater electro-coagulation reuse kinetic model sludge quantity
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号