Gas-phase elemental mercury removal in a simulated combustion flue gas using TiO2 with fluorescent light

A previously proposed technology incorporating TiO₂ into common household fluorescent lighting was further tested for its Hg⁰ removal capability in a simulated flue-gas system. The flue gas is simulated by the addition of O₂, SO₂, HCl, NO, H₂O, and Hg⁰, which are frequently found in combustion facilities such as waste incinerators and coal-fired power plants. In the O₂ + N₂ + Hg⁰ environment, a Hg⁰ removal efficiency (η_Hg) greater than 95% was achieved. Despite the tendency for η_Hg to decrease with increasing SO₂ and HCl, no significant drop was observed at the tested level (SO₂: 5–300 ppm_v, HCl: 30–120 ppm_v). In terms of NO and moisture, a significant negative effect on η_Hg was observed for both factors. NO eliminated the OH radical on the TiO₂ surface, whereas water vapor caused either the occupation of active sites available to Hg⁰ or the reduction of Hg₀ by free electron. However, the negative effect of NO was minimized (η_Hg > 90%) by increasing the residence time in the photochemical reactor. The moisture effect can be avoided by installing a water trap before the flue gas enters the Hg⁰ removal system.

Implications: This paper reports a novel technology for a removal of gas-phase elemental mercury (Hg⁰) from a simulated flue gas using TiO₂-coated glass beads under a low-cost, easily maintainable household fluorescent light instead of ultraviolet (UV) light. In this study, the effects of individual chemical species (O₂, SO₂, HCl, NO, and water vapor) on the performance of the proposed technology for Hg⁰ removal are investigated. The result suggests that the proposed technology can be highly effective, even in real combustion environments such as waste incinerators and coal-fired power plants.