| 校正弯曲回弹分析及校正力确定 |
| |
| 引用本文： | 陈菁,李湘生,纪胜如,钱应平,刘能星.校正弯曲回弹分析及校正力确定[J].装备环境工程,1997(4). |
| |
| 作者姓名： | 陈菁 李湘生 纪胜如 钱应平 刘能星 |
| |
| 作者单位： | 武汉武昌湖北工学院机械系!430068(陈菁)，湖北工学院(李湘生，纪胜如，钱应平，刘能星) |
| |
| 摘 要： | 通过分析板材塑性弯曲时的校正压力与弯曲力矩之间的关系,研究了校正压力对减少板材回弹的作用.这对校正弯曲的工艺设计具有十分重要的意义.
|
| 关 键 词： | V型弯曲 回弹 校正力 |
Analysis of Springback and Decision of Pressure on Bending |
| |
| Li Xiangsheng Chen Qing Qian Yingping,Liu Nengxing HuBei Institute of technology.Analysis of Springback and Decision of Pressure on Bending[J].Equipment Environmental Engineering,1997(4). |
| |
| Authors: | Li Xiangsheng Chen Qing Qian Yingping Liu Nengxing HuBei Institute of technology |
| |
| Abstract: | This paper studied the relation of adjustment pressure with bending moment under plastic bending condition, and studied the efiect of adjustment pressure upon reducing spnngback,which is significant to the design of berding. |
| |
| Keywords: | V-Bend Springback Adjustment Pressure |
| 本文献已被 CNKI 等数据库收录！ |
