| 采用大变形弹塑性有限元法对带材异步冷轧过程的数值模拟 |
| |
| 引用本文： | 朱有利,康永林,龚永平,董德元.采用大变形弹塑性有限元法对带材异步冷轧过程的数值模拟[J].装备环境工程,1995(6). |
| |
| 作者姓名： | 朱有利 康永林 龚永平 董德元 |
| |
| 作者单位： | 北京科技大学金属压力加工系!100083(朱有利)，北京科技大学(康永林，龚永平，董德元) |
| |
| 摘 要： | 此文采用纠正的拉格朗日列式和基于弹塑性乘法分解的超弹性塑性本构关系,对铝带在不同轧制条件下的异步冷轧过程进行了大变形弹塑性有限元模拟.结果表明,在异步轧制时,轧制力对工作辊辊径的变化表现出非敏感性,而且由于搓轧区的存在,使得变形区内静水压力的绝对值比同步轧制时要小得多.
|
| 关 键 词： | 异步冷轧 大变形 有限元法 |
Large Deformation Elasto-Plastic Finite Element Simulation of Asymmetrical Cold Rolling of Strip |
| |
| Zhu Youli Kang Yonglin Gong Yongping Dong Deyuan.Large Deformation Elasto-Plastic Finite Element Simulation of Asymmetrical Cold Rolling of Strip[J].Equipment Environmental Engineering,1995(6). |
| |
| Authors: | Zhu Youli Kang Yonglin Gong Yongping Dong Deyuan |
| |
| Institution: | Zhu Youli Kang Yonglin Gong Yongping Dong Deyuan |
| |
| Abstract: | In this paper,asymmetrical cold rolling of Al strips under different rolling conditions are analyzed by using large deformation elasto -plastic finite element method with updated lagrangian formulation and elasto -plastic multiplicative decomposition based hyperelastic plastic constitutive relations. Numerical results show that, during asymmetrical rolling,rolling forces exhibit insensitivity to work roll diameter variations. And the absolute values of hydrostatic pressure within the deformation region are substantialy lower compared with those under asymmetrical rolling conditions,thanks to the existence of a shear rolling region. |
| |
| Keywords: | Large Deformation Finite Element Method Asymmetrical Cold Rolling |
| 本文献已被 CNKI 等数据库收录！ |
