Heavy metals availability (Fe, Mn, Zn, Cu and Cr) in Aden Gulf sediments under aerobic and anaerobic conditions

The present study aims to analyse the chemical speciation of heavy metals in relation to aerobic and anaerobic conditions. Two sediment samples (from the Gulf of Aden, Yemen) were incubated under flooded conditions. In particular, the chemical forms of Fe, Mn, Zn, Cu and Cr under the experimental conditions were studied using a sequential chemical extraction method. The pH and Eh of the suspension were measured as critical parameters controlling the fate of the metals in the environment. The results showed that the metals concentration in the different forms varied with time incubation and affected by the variation of redox potential and pH value. Also, the changes in both redox potential (Eh) and pH values had evident effects on heavy metals transformation. It is obvious that the highest redox potential affected the amount of iron and manganese in the oxides form. When the redox potential decreased to-133 and-170 mV, it caused a significant transformation of the Fe-Mn oxide form to the water-soluble and exchangeable fractions. Under anaerobic conditions, the relative percentage of all five metals including the summation of four fractions (the water-soluble and exchangeable, carbonate, oxides and organic fractions) constituted 45-60% of the total amount of iron, 33-50% for manganese, 33-63% for Zn, 63-74% for Cu and 19-43% for Cr. Both zinc and copper among water-soluble and exchangeable fraction were high at the end of incubation period, this accompanied by a significant decrease in the content of the organically bound fraction. In general, the reducing conditions were more favorable for metal bound to water soluble and exchangeable fraction.