| 电子束物理气相沉积制备热障涂层研究进展 |
| |
| 引用本文： | 孙健,刘书彬,李伟,姜肃猛,宫骏,孙超.电子束物理气相沉积制备热障涂层研究进展[J].装备环境工程,2019,16(1):1-6. |
| |
| 作者姓名： | 孙健 刘书彬 李伟 姜肃猛 宫骏 孙超 |
| |
| 作者单位： | 中国科学院金属研究所 材料表面工程研究部,沈阳 110016;中国科学技术大学 材料科学与工程学院,沈阳 110016;中国科学院金属研究所 材料表面工程研究部,沈阳,110016 |
| |
| 摘 要： | 介绍了电子束物理气相沉积设备的主要组成、工作原理和电子束物理气相沉积热障涂层的结构特点,并重点论述了工件转速、工件温度、靶材蒸汽入射角度、工件表面的粗糙度、粘结层预氧化、改性粘结层和双层陶瓷层等对电子束物理气相沉积热障涂层性能的影响。
|
| 关 键 词： | 航空发动机 电子束物理气相沉积 热障涂层 粘结层 工件转速 工件温度 |
| 收稿时间： | 2018/8/10 0:00:00 |
| 修稿时间： | 2019/1/25 0:00:00 |
Research Progress of Thermal Barrier Coating Prepared by Electron Beam Physical Vapor Deposition |
| |
| SUN Jian,LIU Shu-bin,LI Wei,JIANG Su-meng,GONG Jun and SUN Chao.Research Progress of Thermal Barrier Coating Prepared by Electron Beam Physical Vapor Deposition[J].Equipment Environmental Engineering,2019,16(1):1-6. |
| |
| Authors: | SUN Jian LIU Shu-bin LI Wei JIANG Su-meng GONG Jun and SUN Chao |
| |
| Institution: | 1. Research Department of Material Surface Engineering. Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; 2. School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China,1. Research Department of Material Surface Engineering. Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; 2. School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China,1. Research Department of Material Surface Engineering. Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; 2. School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China,1. Research Department of Material Surface Engineering. Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China,1. Research Department of Material Surface Engineering. Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; 2. School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China and 1. Research Department of Material Surface Engineering. Institute of Metal Research, Chinese Academy of Sciences, Shenyang 110016, China; 2. School of Materials Science and Engineering, University of Science and Technology of China, Shenyang 110016, China |
| |
| Abstract: | The main components, working principle of electron beam physical vapor deposition equipment and the micro-structures of thermal barrier coatings prepared by electron beam physical vapor deposition were briefly introduced. The effect of substrate rotation speed, substrate temperature, vapor incident angle, substrate roughness, bond coating pre-oxidation, modified bond coating and double- ceramic layer on the performance of thermal barrier coatings of electron beam physical vapor deposition was discussed. |
| |
| Keywords: | aeroengine electron beam physical vapor deposition thermal barrier coating bond coating substrate rotation speed substrate temperature |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《装备环境工程》浏览原始摘要信息 |
| 点击此处可从《装备环境工程》下载免费的PDF全文 |
|
