| Abstract: | Fourteen paper sludge samples were collected at seven representative pulp and paper mills in Japan, and were analyzed to obtain fundamental data on the reuse of paper sludge-incinerated ash as papermaking material. For comparison, incinerated ashes of municipal solid waste (MSW) were collected at MSW incineration plants in Tokyo, and analyzed by similar methods. Elementary and X-ray diffraction analyses revealed that the predominant elements in paper sludge samples are calcium, silicon, aluminum, and magnesium, which are derived from paper fillers, coating pigments, and coagulants used in papermaking and process effluent treatments. Similar results were also obtained for the MSW-incinerated ashes, indicating that major components in the collected MSW are paper-related materials. Incineration of paper sludge around 800°C is recommended in terms of high brightness of the incinerated ash, which has about 60% brightness. Calcium, silicon, and aluminum components in the paper sludge are fused or sintered by heating. Although paper-sludge-incinerated ashes have irregular shape and large particle size distributions, they may be used as papermaking materials after pulverization using a ball mill. The MSW-incinerated ashes have 5%–30% water-soluble fractions and low brightness, and thus incineration conditions must be changed to reuse the MSW-incinerated ash as a papermaking material.Part of this paper was presented at the 68th Research Conference of Japan Tappi, Tokyo, 2001 |
