Effect of the Pretreatment with UV and Gamma Radiations on the Modification of Plywood Surface by Photocuring with Epoxy Acrylate |
| |
Authors: | Mubarak A Khan Ruhul A Khan B S Aliya Z Nasreen |
| |
Institution: | (1) Radiation and Polymer Chemistry Laboratory, Institute of Nuclear Science and Technology, Bangladesh Atomic Energy Commission, P.O. Box 3787, Dhaka, Bangladesh;(2) Department of Chemistry, DUET, Gazipur, 1700, Bangladesh |
| |
Abstract: | In order to further improve the physical properties of plywood surface that was pretreated with UV and Gamma radiation at
different radiation intensities before photocuring. After pretreatment with radiation the plywood surface was coated with
different prepared formulations containing epoxyacrylate (EA-1020) as an oligomer, difunctional monomers such as tripropylene
glycol diacrylate (TPGDA), 2-hexadioldiacrylate (HDDA), Ethylene Glycol dimethacrylate (EGDMA) and trifunctional monomer trimethyl
propen triacrylate (TMPTA) with photoinitiator Darocur 1664. Thin polymer films were prepared on glass plate with these formulated
solutions and cured under UV radiation. Pendulum hardness (PH) and gel content of the film were studied for selecting the
formulations as top coat and as base coat. The polished plywood surface was coated with selected formulation and cured under
UV radiation. Various rheological properties of UV cured plywood surface such as pendulum hardness, scratch hardness, microgloss,
adhesion strength, percentage chipped off area and abrasion resistance were studied. |
| |
Keywords: | Gamma radiation photo-curing plywood surface coating UV-radiation |
本文献已被 SpringerLink 等数据库收录! |
|