| EG-510PCB印制板复合复位模设计 |
| |
| 引用本文： | 刘光富,孙正强,杨连华.EG-510PCB印制板复合复位模设计[J].装备环境工程,1998(2). |
| |
| 作者姓名： | 刘光富 孙正强 杨连华 |
| |
| 作者单位： | 合肥工业大学机械系
(刘光富)，合肥工业大学机械厂
(孙正强)，六安光华模具厂(杨连华) |
| |
| 摘 要： | 此文分析了加工EG-510PCB印制板模具的设计方案。用大间隙的复位冲裁间隙和固定弹顶装置来解决八拼板零件的复位问题,满足了模具使用上的要求。并采用一次成形的复合复位模结构,既保证了产品的质量,又提高了生产效率,同时降低了生产成本。
|
| 关 键 词： | 复合复位模 复位冲裁间隙 固定弹顶装置 |
Design of Compound Repositioning Die for EG-510PCB Printing Plate |
| |
| Hefei Ploytechnical University Liu Guangfu.Design of Compound Repositioning Die for EG-510PCB Printing Plate[J].Equipment Environmental Engineering,1998(2). |
| |
| Authors: | Hefei Ploytechnical University Liu Guangfu |
| |
| Institution: | Hefei Ploytechnical University Liu Guangfu |
| |
| Abstract: | This paper presents the analysis of design project about the die for machining the EG-510PCB printing plate. To meet with the demand of die, the repositioning problem of the 8-MAZAK can be solved by using the large clearance of repositioning punching, and fixed elastic-rejecting device. The construction of once-formed compound repositioning die is also adopted to guarantee the quality of the product, raise the production efficiency and decrease the cost of production. |
| |
| Keywords: | Compound repositioning die Clearance of repositioning punching Fixed elastic-rejecting device |
| 本文献已被 CNKI 等数据库收录！ |
