Foliar and ground deposits of fenitrothion following aerial application over a plantation forest

Abstract

Spray deposits were measured on spruce foliage at tree canopy level and on glass plates at ground level, after aerial application of an emulsion formulation of fenitrothion at the rate of 0.21 kg AI in 1.46 L per ha over a 16 ha plot in a plantation forest. Fenitrothion deposits were quantified by gas‐liquid chromatography. A wide variation was observed in deposits on foliage and at the forest floor. Deposits were relatively higher on foliar samples collected from the upwind side of a tree canopy than those on the downwind side. Similarly, the glass plate placed under a tree on the upwind side received relatively higher deposit than the one on the downwind side. However, the glass plates placed in the adjacent forest openings collected markedly higher deposits. Results clearly indicate filtration of the spray droplets by canopy foliage. Assessment of the average deposit of fenitrothion at ground level (mean deposit from all sampling locations) indicated that ca. 19.4% of the applied material reached the forest floor. Within a sampling station, correlation was poor between foliar depsits and those on glass plates under the same trees or in nearby clearings. Analysis of fenitrothion deposits on foliage collected at 1 and 2 h after application indicated that the droplets took, more than 1 h for deposition on the tree canopy. On the other hand, deposition on the glass plates at ground level appeared to be practically complete within 1 h post‐treatment. This was attributed to the higher sedimentation velocities of the larger droplets which tend to travel faster to the floor level than the smaller droplets which float for a longer period near the tree canopy.