| 基于LabVIEW的变压器绕组发热试验自动测试软件 |
| |
| 引用本文： | 蔡振峰,许毅,陆斌,万镭,沈海舟.基于LabVIEW的变压器绕组发热试验自动测试软件[J].环境技术,2014(6):47-51. |
| |
| 作者姓名： | 蔡振峰 许毅 陆斌 万镭 沈海舟 |
| |
| 作者单位： | 上海交通大学电子信息与电气工程学院仪器科学与工程系;上海市质量监督检验技术研究院电子电器家用电器质量检验所; |
| |
| 基金项目： | 上海市质量技术监督局批准立项的科研项目“绕组温升自动测试系统研究”(项目编号:2013-20) |
| |
| 摘 要： | 遵照变压器认证标准GB19212．1（IEC 61558－1）中型式试验的关键项目一发热试验的一般要求，针对试验中最广泛使用的热阻法，并使用常见的离线测试方式和经验公式代入计算法，编写了一套基于LabVIEW开发环境的自动测试软件，构建以图形化软件为核心的下一代自动化测试系统。
|
| 关 键 词： | 变压器 型式试验 绕组 温升 发热 热阻法 |
Automatic Test Software for the Heating Test of the Transformer Windings Based on LabVIEW |
| |
| Institution: | CAI Zhen-feng, XU Yi, LU Bin, WAN Lei, SHEN Hai-zhou (1. School of Electric Information and Electrical Engineering Dept. of Instrument Science and Engineering Shanghai Jiao Tong University, Shanghai 200030; 2. Shanghai Institute of Quality Inspection and Technical Research, Institute of Quality Inspection of Electronic and Electrical Appliances ＆ Household Electrical Appliances presentation, Shanghai 201114) |
| |
| Abstract: | In this paper, in accordance with the general requirements of the heating test, that was the key item of the type tests for transformer products certification in the standards GB 19212.1 （IEC 61558-1, idt）, based on the LabVIEW development environment, an automation test software for the most widely used thermal-resistance testing method in which the common off-line testing method and the empirical formula into calculation were used, was prepared and programmed. Based on the graphical software as the core, these works would help to build the next generation of automatic test system. |
| |
| Keywords: | transformer type test windings temperature rise heating thermal resistance method |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
