生物膜载体填料-污泥资源化研究

污泥资源化是污泥处置的发展趋势，以脱水污泥为主料，添加适量粉煤灰和粘土，制备生物膜载体填料是实验研究的主要内容。实验表明，污泥使用量为70％、粉煤灰和粘土各15％时，烧成温度为1000±25℃、保温时间为40min，烧制的填料抗压强度能达到25mpa、吸水率17％；用于药厂废水处理测试，在常温下的化学需氧量（CODCr）的平均去除率为74．0％、悬浮物（SS）的去除率为54．1％。使用扫描电镜、显微镜像检测，分析了填料烧制中孔隙形成机理、填料外貌、表面微孔结构等。实验表明，以污泥代替天然原料，在一定条件下可以烧制成填料，并能用作污水处理中生物膜载体。

Study on Filling as Biofilm Carriers-sludge Resource Utilization

Sludge resource utilization being the developing trend in sludge disposal, the paper study on the preparation of biofilm carriers using dehydrated sludge as main material, adds appropriate amount of flay ash and clay. The results showed that the obtained filling own the following excellent performance ： the Compressible strength could reach 25 mpa, the water - absorptivity rate is 17% ; when used amount of sludge 70%, flay ash 15%, clay 15% and sintefing temperature 1 000±25℃, time for heat preservation 40 min; And the filling tested with pharmaceutical plant sewag, under normal temperature, the CODCr, average removing rate is 74. 0%, SS removing rate is 54. 1%. Meanwhile, filling＇s pore formation mechanism, appearance and microcellular structure of the surface also studied by scanning electron microscope and microscope. It showed that natural material can be Replaced by the sludge which can be burned filling that can be used as Biofilm carriers in sewage treatment.